Shenzhen Share Vision 2AKFO-F8 Dome Surve illance Camera User Guide
- June 4, 2024
- Shenzhen Share Vision
Table of Contents
Shenzhen Share Vision 2AKFO-F8 Dome Surveillance Camera
Packing List
After opening the package, please check the low-power wireless battery camera
(the “Equipment”) to verify whether the following parts are complete
.
Appearance
WiFi function introduction
- Reset the button AP hotspot Press and hold for around 5 Secs, and let it go when hearing a “beep” sound, the device restores factory settings: Press and hold for around 8 secs and hear 2″ beeps”, and then let it goes, the device switches to AP hotspot mode, Hotspot password: 12345678
- charging port Type-C power supply and solar panel charging port
- Speaker Used to send out a system prompting sound and achieve voice dialogue
- TF Card Slot The user can insert 8G, 18G, 32G 64G 128G SD card (Please use a branded card with C10 and above) to store video image files
Installation Guide
As shown in the figure, install the stand
- Please install and fixed the metal bracket well on the wall
- Adjust and match the camera bracket hole to the metal bracket hole
- Screw the camera bracket and fixed it
APP INSTALLATION
- Scan the following QR codes or search for “UBox from the App Store(for iOS devices) or Google Play Store (for Android smartphones) to download and install the app.
APP REGISTRATION
- Open the app then input your E-mail address then press ‘Register’. Check and select to agree on the agreement then your E-mail box will get a verification mail. (For better user experience, please allow to open all permissions to avoid missing any notifications from the app.)
- Set the login password and confrim the login password. Then press Register to the next step. (For your password safety the password requires more than 8 characters plus a combination of letters)
- We send a verification mail to you, go to your mailbox and click the link to complete the verification.
- Enter your E-mail address, and password, and click log in. (APP will auto-fill the account information)
WI-FI CONNECTION
- Press’Add Family’ then set the room or position as per reminders.
- Enter your family name and then press ‘Next’.
- Input the necessary information just like Country, Province, then press ‘Done’.
- Press ‘Add a device’ to add a smart device
- Connect the device with a power supply, and make sure your mobile phone is connected to available Wi-Fi. Then press ‘Setup device’
- After the power on the device, wait for the device’s blue LED is blinking Which means your device is in pairing mode
- If the device blue are not blinking, please press the power/Call key to wake up the device first, then hold and press the RESET button until the blue indicator lights up and then release. The device will reboot and enter the pairing state.
- Give the device a name and select the device address before setup the APP has a default name. after confirmed, go to the next step.
- The app will input the Wi-Fi name automatically, please input the correct Wi-Fi Password. Then you can choose the ‘QR code configuration’ or ‘Sound wave configuration.
- QR Code configuration: select the QR code configuration then the mobile phone display a QR code. Use the device to scan the QR code 10cm away from the mobile phone.
- The device will enter to the device list automatically. Setup success! The device is ready to use.
- Notes about PIR detection
- Users can change the PIR detection sensitivity in device settings we recommend setting the sensitivity at “Disabled” or “Low” to reduce false alert and save the battery power in noisy environments.
- Disabled: disabled PIR detection.
- Low: delay 7 seconds PIR detects a moving
- Medium: delay 5 seconds PIR detects a moving.
- High: delay 1 second PIR detects a moving.
USING THE APP
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>