Flysonic MC-1 Wireless USB Interface User Manual
- June 15, 2024
- Flysonic
Table of Contents
Flysonic MC-1 Wireless USB Interface User Manual
Connection to the head unit in the car
1. Insert the MC-1 box into the USB port of the car
The MC-1 box should be connected with the USB interface of the head unit in
the car, the head unit has the wired Carplay and Android Auto function.
2. Click on the wired CarPlay function in the display screen of the head
unit
Click the wired CarPlay function in the head unit, and identify the M C – 1 b
o x normally
3. Mobile phone pairing
After identifying the MC-1 box, following the hints on the display screen of
the head unit to choose the repaired phone.
Reminder:
- If the head unit fails to display this page, it may be a phone’s compatibility problem, please contact us for a solution.
- There are 4pcs different USB connectors, please first choose the correct one
Special instruction for the phone pairing
Before pairing the MC-1 box with your phone via BT, please delete the original paired phone to avoid interference.
The Bluethooth name is “carplaybox + 4 random numbers”, please search this
name to pair and following the hints displayed on your iphone.
The Bluethooth name is “carplaybox”, please search this name to pair and
following the hints displayed on your iphone.
Search “carplaybox” —> click “ Pair” —> click “ allow” —> use carplay
For the wireless Android Auto, it has the same operation as Carplay!
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>