ecosmart 12A19060WRGBWH1 Wireless Controlled A19 Smart Bulb User Guide

eco-smart 12A19060WRGBWH1 Wireless Controlled A19 Smart Bulb

Specifications

• Model: 12A19060WRGBWH1
• Input Volts (AC): 120
• Input Frequency (Hz): 60
• Input Watts (W): 8.5
• Lumens (LM): 800
• Efficacy (LM/W): 94
• CRI: 90

Product Usage Instructions

Pre-Installation

• A19 LED Bulb
• User Guide
• Quick Start Guide

If you have any questions, problems, or missing parts, please contact Hubspace Customer Service at 1-877-592-5233.

Operation

1. Download the HubspaceTM app from the App Store or the Google Play Store.
2. Sign in to your Hubspace account or tap Register to create a new account.
3. To add your bulb, tap the ‘+’ button in the upper-right corner of the app.

Note: Bluetooth access is required for product setup. Each smart Hubspace bulb must be added individually by scanning the QR code or following the on- screen instructions.

FAQ

Q: Can I use a standard dimmer or dimming control with this bulb?

• A: No, this bulb will not operate properly when connected to a standard (incandescent) dimmer or dimming control. Only use the control provided or specified by the instructions.

Q: Can I use this bulb in totally enclosed fixtures?

• A: No, this bulb is not suitable for use in totally enclosed fixtures.

Q: Can I use this bulb outdoors?

• A: No, this bulb is for indoor use only. Do not use it when directly exposed to water.

Q: Can I use this bulb as an emergency exit light?

• A: No, this bulb is not intended for use with emergency exits.

Q: Are there any user-serviceable parts inside the bulb?

• A: No, do not open the bulb as there are no user-serviceable parts inside. If you need assistance, please contact customer service.

THANK YOU

• We appreciate the trust and confidence you have placed in EcoSmart through the purchase of this bulb.
• We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing EcoSmart!

Safety Information

• WARNING: Only use the control provided with or specified by these instructions to control this lamp. This lamp will not operate properly when connected to a standard (incandescent) dimmer or dimming control.
• WARNING: Not for use in totally enclosed fixtures.
• WARNING: For indoor use only. Do not use where directly exposed to water.
• WARNING: This device is not intended for use with emergency exits.
• CAUTION: Risk of Shock-Turn off power before inspection, installation, or removal. Do not open. There are no user-serviceable parts inside.

Wireless Protocol

• The Wi-Fi CERTIFIED™ Logo is a registered trademark of Wi-Fi Alliance®.
• The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by The Home Depot is under license. Other trademarks and trade names are those of their respective owners.
• Apple and the Apple logos are trademarks of Apple, Inc., registered in the U.S., and other countries. App Store is a service mark of Apple Inc.
• Google, Google Play, and the Google Play logo are trademarks of Google LLC.

Warranty

FIVE-YEAR LIMITED WARRANTY

• Limited Warranty: Guaranteed to last 5 years based on 3 hours of use per day, 7 days per week. If this bulb does not last 5 years after the date of purchase (based on 3 hours per day / 7 days per week) due to a defect in materials or workmanship, please bring the defective bulb and a receipt indicating proof of purchase to any Home Depot store. The Home Depot will provide a replacement or, at our discretion, a store credit for the value of the original purchase price. This warranty will be voided for misuse of the product per the caution statement. Some states do not allow the exclusion of limitation or consequential damages, so the above exclusion may not apply to you.
• This warranty gives you specific legal rights and you may also have other rights that vary from state to state and province to province. Please see the store for more details.

FCC Regulation

• Supplier’s Declaration of Conformity
• 47 CFR § 2.1077 Compliance Information
• Unique Identifier: 12A19060WRGBWH1(1008 588 501)

Responsible Party

• Leedarson America, Inc.
• 300 Technology Court SE Suite 100; Smyrna, GA 30082
• 1-678-293-8382

FCC ID: 2AB2Q-12A800STQT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment, if not installed and used under the instructions, may cause harmful interference to radio communications. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: reorient or relocate the receiving antenna; increase the separation between the equipment and receiver; connect the equipment into an outlet on a circuit different from that to which the receiver is connected; consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

Pre-Installation

Package Contents

Bulb Specification

Model| Input Volts (AC)| Input Frequency (Hz)| Input Watts (W)| Lumens (LM)| Efficacy (LM/W)| CRI
---|---|---|---|---|---|---
12A19060WRGBWH1| 120| 60| 8.5| 800| 94| 90

Operation

1. Download the Hubspace™ app from the App Store or the Google Play Store.
2. Sign in, or tap Register to create a Hubspace account.
3. To add your bulb, tap the ‘+’ button in the upper-right corner.
   • NOTE:
   • Bluetooth access is required for product setup.
   • Each smart Hubspace bulb must be added individually by scanning the QR code or by following the instructions for manual setup.
   • Manual instructions can be found in the app or under step 8 of this product manual.
   • Scanning the QR code is the fastest method for setup.
   • QR code must be scanned from inside the Hubspace app.
4. Scan the QR code printed on either the bulb or the Quick Start Guide. NOTE:
   • QR code must be scanned from inside the Hubspace app.
   • If the QR code cannot be scanned, you can enter the code manually. Tap Enter Code and follow the instructions.
   • If you are unable to access the QR code, on the Scan Product screen, tap the Search button in the lower-right corner and follow the instructions.
   • If you cannot locate the QR code or are having trouble scanning the QR code, please follow the instructions for manual setup.
   • Manual setup instructions are under step 8 of this product manual.
5. Connect your bulb to power and follow the instructions on the app screen.
   • This Hubspace bulb requires a 2.4GHz Wi-Fi network, which most routers provide.
   • The Hubspace app will only show Wi-Fi networks compatible with this bulb.
   • If you do not see your Wi-Fi network name when you attempt to connect your bulb, please check your router settings or move your product closer to your Wi-Fi router.
6. Control your lighting using the Hubspace app
   • Control Dimming: choose the brightness you want in the app.
   • Change Colors: Select from shades of white or a full-color spectrum.
   • Group Control: group bulbs so they can be controlled at one time.
   • Set up groups by tapping the “+” sign on the home screen and selecting “Set up a group”. Follow the instructions in the app.
   • Groups can also be set up by setting up rooms. Select “rooms” from the home screen and follow the instructions in the app.
   • Create Schedules: program bulbs to turn on and off automatically.
   • Select Schedules from the home screen. Follow the steps in the app to create schedules.
7. Set up your Voice Assistant
   • You can connect your smart bulb to Google Assistant and Alexa from the Hubspace app.
   • Or, you can sign in to the Alexa app or Google Assistant and connect to your Hubspace products from there.
8. Manual Set up
   • If you cannot locate the QR code or are having trouble scanning the QR code, follow the below instructions:
   • Power on the bulb.
   • Tap the ‘+’ button in the upper right corner of the app screen to add your bulb.
   • Tap the Search button in the lower right-hand corner and follow the directions in the Hubspace App.
   • NOTE: The QR code must be scanned from inside the Hubspace app.

Troubleshooting Guide

connected to a power source. Your internet connection or Wi-Fi network may be down.
My product cannot find any Wi-Fi networks.| Make sure you have a 2.4GHz capable Wi-Fi network within range of the product you are trying to add.
My product is in a location that does not have Wi-Fi. Can I still use it with the Hubspace app?| Yes. Use the app on a phone with an internet connection like LTE. The phone must be within Bluetooth range of your Hubspace product.
I cannot find the QR code.| It is on the bulb housing. A copy of the QR code is also included in your product’s documentation.
The QR code has become damaged. How do I add the product?| Under the QR code are numbers. You can enter those in manually instead of scanning the code.
The QR code will not scan.| The QR code must be scanned from inside the Hubspace app. If still unable to scan, please follow the instructions for manual setup under step 8 of this product manual.
I lost my QR code. How do I add a product?| Make sure the product is connected to power. In the Hubspace app, tap +, then Add Product.

On the Scan Product screen, tap the Search button in the lower-right corner. Follow the instructions on-screen.

A product is on another account. How do I transfer it?| Scan the QR code and it will transfer to your account.
My product is online for long periods.| Make sure your Wi-Fi signal strength is sufficient. You may need to move your router and use mesh Wi-Fi, or Wi-Fi extenders.
The product is on and I scanned the QR code, but the app cannot connect to it.| Turn off Bluetooth on your phone and turn it back on. Then, scan the QR code. If the problem persists, turn your phone off and on, then try again.
Can I scan the same QR code to add multiple products?| No. Each product has a unique QR code.

• Questions, problems, missing parts? Before returning to the store, call Hubspace Customer Service
• 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
• 1-877-592-5233
• HOMEDEPOT.COM/Hubspace
• Retain this manual for future use.

Documents / Resources

| ecosmart 12A19060WRGBWH1 Wireless Controlled A19 Smart Bulb [pdf] User Guide
12A19060WRGBWH1 Wireless Controlled A19 Smart Bulb, 12A19060WRGBWH1, Wireless Controlled A19 Smart Bulb, Controlled A19 Smart Bulb, Smart Bulb, Bulb
---|---

References

• Hubspace - Smart Home - The Home Depot

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>