Hironpal CT07302010WH White High Gloss LED Coffee Instruction Manual
- June 15, 2024
- Hironpal
Table of Contents
Hironpal CT07302010WH White High Gloss LED Coffee
Product Information
Model: CT07302010WH/CT02902010WH/20BK
Specifications
- Color: White/Black
- Material: Wood
- Dimensions: [Insert Dimensions]
- Weight: [Insert Weight]
Product Usage Instructions
Precautions
Basic precautions should always be followed when using this product. Please read all instructions before using the cabinet. Failure to observe all instructions and warnings regarding use this product may cause serious property damage or personal injuries.
Unpacking and Inspection
When unpacking, please be careful not to cut too deep to damage the products in the box. Use the blade to scratch the parcel tape. Check the product accessories and hardware accessories in the box and confirm whether the instructions are complete. When installing, please pay attention to the protection of the parts. The soft material must be placed under the product, and the product must be handled with care to avoid damaging the surface of the parts.
Child Safety
Keep children away from cabinets, accessories, and installation tools. They
are at risk of injury to the child.
Assembly Instructions
Step 1: Top Panel and Top Back Panel
Screw the bolt A into the pre-drilled holes on the top panel and top back
panel.
Step 2: Bottom Back Panel
Screw the bolt C into the side holes on the bottom back panel.
Step 3: Side Panels
Connect the top left side panel and bottom left side panel with bolt B. Then
tighten B clockwise.
Step 4: Front Panels
Screw the wooden dowel C into the side holes.
Step 5: Final Assembly
Turn it over so that all wooden dowels C are facing down.
Step 6: Connect Top and Bottom Parts
Connect the bottom part and the top part with bolt A. Tighten the bottom part
with bolt B in a locking position clockwise. Stick the rubber feet pads on
holes D.
Step 7: LED Strip Installation
Stick the LED strip to the panel using adhesive.
Step 8: LED Lamp Belt Installation
Before installation, please remove the adhesive protective film of the LED
lamp belt, insert the buckle into the lamp belt, and follow the instructions
to attach the lamp belt to the cabinet.
Step 9: Remove Protective Film
Remove the protective film from the cabinet.
FAQ (Frequently Asked Questions)
Q: Can I paint the cabinet a different color?
A: Yes, you can paint the cabinet a different color as long as you follow
proper painting techniques and use suitable paint for wood surfaces.
Q: Can the cabinet be disassembled and reassembled?
A: Yes, the cabinet can be disassembled and reassembled following the
provided assembly instructions.
Q: How do I clean the cabinet?
A: To clean the cabinet, simply wipe it with a damp cloth. Avoid using
harsh chemicals or abrasive cleaners that may damage the surface.
Q: Can I mount the cabinet to the wall?
A: No, this cabinet is not designed to be wall-mounted. It is intended
for floor or countertop use only.
Safety Information
Bas read ailinstructions before fill me whine using this product.
Failure to observe all instructions and warnings regarding use this product
may cause serious property damage or personal Injuried.
- When unpacking, Please be careful don’t cut too deep to damage the products in the box, just use the blade to scratch the parcel tape.
- Check the product accessories and hardware accessories in the box; and confirm whether, the instructions are complete.
- When installing, please pay attention to the protection of the parts. The soft material must be placedunder the product, and the product must be handled with care to avoid damaging the surface of the parts.
- After the assembly is completed, please adjust the placement position according to the actual situation.
- Keep children away from cabinets, accessories and installation tools.They are at risk of injury to the child.
PARTS
Assembly Instruction
STEP 1
Screw the bolt A into the pre-drilled holes on 6 Panel.
STEP 2
Screw the bolt C into the side holes on panel and panel 5.
STEP 3
Connect the panel 6 and panel 4 and panel 5 with bolt B. Then tighten B
clockwise as below shown:
STEP 4
Screw the bolt A into the pre-drilled holes on 1 Panel
STEP 5
Screw the wooden dowel C into the side holes on 3 Panel
STEP 6
Screw the bolt A into the pre-drilled holes on 2 Panel; Screw the wooden dowel
C into the side holes on 2 Panel.
STEP 7
Connect the 2 Panel and 3 Panel with B (3 in 1 locking) Then tighten them at
holes position clockwise, As below shown:
STEP 8
Turn it over as below shown( It means that all Woodendowel C should be facing
down).
STEP 9
Connect the 2 and 3 Panel with 1 Panel.
Then tighten all panels with B (3 in 1 locking) at holes position clockwise.As
below shown:
STEP 10
Connect the bottom part and the top part with A,Tighten bottom part with B (3
in 1 locking) at holes position clockwise.Stick the D (rubber feet pads) to
the coner of 6 Panel.
STEP 11
Stick the LED Strip to 1 Panel.
Before installation, please remove the adhesive protective film of the LED lamp belt, insert the buckle into the lamp belt,and follow the instructions to attach the lamp belt
STEP 12
Remove the protective film.
Installation Diagram
Installation Diagram of Light Belt
