tp-link TL-PA4022P KIT Powerline Adapter Installation Guide

tp-link TL-PA4022P KIT Powerline Adapter

Product Information

The TL-PA4022P KIT (European version) is a powerline adapter used to create a secure powerline network. It is designed to extend your network connection to areas of your home or office where Wi-Fi signals may be weak or nonexistent. The adapter works by transmitting data through the electrical wiring in your building, providing a reliable and high-speed internet connection.
The TL-PA4022P KIT comes with two adapters: the TL-PA4020P and the TL-PA4010P. The TL-PA4020P adapter is suitable for use when the power outlets are on the same electrical circuit, while the TL-PA4010P adapter is recommended for use when the power outlets are on different electrical circuits.
Both adapters have a maximum power output of 3680W and a maximum current rating of 16A. They support AV600 technology, which allows for data transmission speeds of up to 600Mbps.

Product Usage Instructions

1. Ensure that the powerline adapters are plugged into wall outlets instead of power strips.
2. To create a secure powerline network:
3. Press and hold the Pair button on any of the powerline devices for 1 second. The Power LED should start blinking.
4. Within 2 minutes, press and hold the Pair button on another device for 1 second. The Power LED should start blinking.
5. Wait for the Powerline LED to light up, indicating that a powerline network has been successfully created.
6. To join an existing secure powerline network:
7. Press and hold the Pair button on any of the existing powerline devices for 1 second. The Power LED should start blinking.
8. Within 2 minutes, press and hold the Pair button on the new powerline adapter for 1 second. The Power LED should start blinking.
9. Wait for the Powerline LED to light up, indicating that a powerline network has been successfully joined.
10. The TL-PA4022P KIT supports a Power-Saving Mode. If the device connected to the adapter is turned off or inactive for more than 5 minutes, the powerline adapter will automatically switch to Power-Saving Mode.

Physical Appearance
The TL-PA4020P and TL-PA4010P adapters have an integrated electrical socket that can be used to power other devices. They also feature Power LED, Powerline LED, Ethernet LED, and Pair Button for easy setup and monitoring.

• TL-PA4022P KIT (European version) is used for demonstration in this guide. Images may differ from your actual product.

  • Wait until the Powerline LED turns on.
    Note: If the LED is off, please refer to FAQ-Q2.

  • More: To add additional powerline adapters and extenders with the default settings, simply plug them into the wall sockets on the same electrical circuit.
    

Attention
Plug powerline devices into wall outlets instead of power strips.

Set Up a Secure Powerline Network by Pairing (Recommended)

You can create or join a secure powerline network using the Pair button on two devices at a time.
Tips: We recommend that you plug in the powerline devices near each other when pairing.

To create a secure powerline network:

1. Press the Pair button on any of the powerline devices for 1 second. Its Power LED should start blinking.
   Note: If the Power LED does not blink, press the Pair button again.

2. (Within 2 minutes) press the Pair button on another device for 1 second. Its Power LED should start blinking.

3. When the Powerline LED lights up, a powerline network has been successfully created.

To join an existing secure powerline network:

1. Press the Pair button on any of the existing powerline devices for 1 second. Its Power LED should start blinking.
   Note: If the Power LED does not blink, press the Pair button again.

2. (Within 2 minutes) press the Pair button on the new powerline adapter for 1 second. Its Power LED should start blinking.

3. When the Powerline LED lights up, a powerline network has been successfully created.

Physical Appearance

Frequently Asked Questions

• Q1. How do I reset my powerline adapter?
  • A. With the powerline adapter plugged into an electrical outlet, press and hold the Pair button for more than 6 seconds until the Power LED goes off momentarily and then comes back on.
• Q2. What should I do if the Powerline LED is off?
  • A1. Try another wall socket and make sure all powerline devices are on the same electrical circuit.
  • A2. Try to set up a powerline network by pairing. Refer to the section above for instructions.
  • A3. If the problem persists, contact our Technical Support.
• Q3. What should I do if there is no internet connection in my powerline network?
  • A1. Make sure all powerline devices are on the same electrical circuit.
  • A2. Make sure the Powerline LEDs are lit on all of your powerline devices. If they are not, pair all devices again.
  • A3. Make sure all devices are correctly and securely connected.
  • A4. Check if you have an internet connection by connecting the computer directly to the modem or router.
• Q4. What should I do if a successfully-paired powerline device does not reconnect after it is relocated?
  • A1. Try another socket and make sure it is on the same electrical circuit.
  • A2. Try to pair the device again, and make sure the Powerline LED is on.
  • A3. Check for possible interference due to a washing machine, air conditioner or other household appliance that may be too close to one of the powerline devices. Plug the appliance into the integrated electrical socket to remove the electrical noise if your powerline device has an integrated electrical socket.

Safety Information

• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
• For passthrough devices, plug the power strips into the integrated electrical sockets of the devices, but devices of the same or another type not be stacked in normal use.
• Plug the powerline devices directly into the wall outlets but not the power strips.
• Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Easy Management
Using tpPLC utility for advanced configuration:

1. Visit https://www.tp-link.com, and search for your product.
2. Find and download the compatible version of utility on its Support page.
3. Install the utility and start your configuration.

Support

1. For technical support, replacement services, user guides, and other information, please visit https://www.tp-link.com/support, or simply scan the QR code
2. To communicate with TP-Link users or engineers, please join the TP-Link Community at https://community.tp-link.com.

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU Declaration of Conformity may be found at https://www.tp- link.com/en/support/ce/ TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016. The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca

References

• TP-Link Community
• WiFi Networking Equipment for Home & Business | TP-Link
• CE Regulatory Compliance | TP-Link
• Regulatory Compliance | TP-Link

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>