PHILIPS BWS010 Essential SmartBright Solar Wall Light User Guide
- June 15, 2024
- Philips
Table of Contents
PHILIPS BWS010 Essential SmartBright Solar Wall Light
Product Information
Specifications
- Product Name: Essential SmartBright Solar Wall Light
- Product Family: Outdoor Solar LED Wall light
- Version:
- BWS010 LED50/765
- BWS010 LED300/765
- BWS010 LED100/765
- Correlated Color Temperature (Nom): 6500 K
- Color Rendering Index (CRI): >70
- Battery Type: Lithium-ion – NMC
- Battery Voltage: 3.7 V
- Charge Controller Type: PWM
- Panel Type: Poly crystalline
- Ambient Temperature Range:
- Operating: [Specify operating temperature range]
- Ingress Protection Code: IP42
- Battery Ampere Hour:
- 0.8 Ah (for BWS010 LED50/765)
- 2 Ah (for BWS010 LED300/765)
- 1.2 Ah (for BWS010 LED100/765)
- Panel Peak Wattage:
- 0.5 W (for BWS010 LED50/765)
- 1.3 W (for BWS010 LED300/765)
- 0.75 W (for BWS010 LED100/765)
- Overall Length: 125 mm
- Overall Height:
- 52 mm (for BWS010 LED50/765)
- 54 mm (for BWS010 LED300/765 and BWS010 LED100/765)
- Overall Width:
- 99 mm (for BWS010 LED50/765)
- 178 mm (for BWS010 LED300/765 and BWS010 LED100/765)
Product Usage Instructions
Installation
- Choose a suitable location for mounting the solar walllight.
- Ensure that the solar panel receives direct sunlight for optimal charging.
- Use the provided screws and anchors to securely mount the light on the wall.
Operation
To turn on the solar wall light:
- Locate the mode switch on the side of the light.
- Toggle the switch to the desired mode: ON, OFF, or AUTO.
- In AUTO mode, the light will automatically turn on at dusk and off at dawn.
Maintenance
To ensure proper functioning and longevity of the solar wall light:
- Regularly clean the solar panel to remove any dirt or debris that may obstruct sunlight.
- Inspect the light for any signs of damage or wear. Replace any faulty components.
- Keep the solar panel exposed to direct sunlight for maximum charging efficiency.
Essential SmartBright Solar Wall Light
Outdoor solar wall light with inbuilt lithium ferro phosphate battery, solar panel, inbuilt motion sensor, switch to change modes and LED lights integrated in ABS plastic housing.
Benefits
- DIY easy installation
- No wiring required
- Suitable for outdoor installation.
- Motion sensor to optimize battery and light requirements.
- Easily configurable as per consumer need.
Features
- All in one construction, the device can be installed on a wall screw.
- Completely powered by solar energy.
- IP42 rated ABS plastic housing.
- PIR motion sensor to detect motion and optimize battery life.
- Toggle switch on front to cycle through multiple operational modes.
- LiFePO4 battery included inside the luminaire.
Application
- Garden
- Walkways
- Parking areas
- Architectural Lighting
- Landscape
Warnings and Safety
This product includes rechargeable batteries which must be adequately charged under sunlight before use.
Versions
- BWS010 LED50/765
- BWS010 LED300/765
- BWS010 LED100/765
Dimensional drawing
Specification
Operating and Electrical
Mechanical and Housing
© 2023 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. All trademarks are owned by Signify Holding or their respective owners.www.lighting.philips.com 2023, April 14 – data subject to change
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>