Tignapoo MY-376 Wearable Electric Breast Pump Installation Guide
- June 15, 2024
- Tignapoo
Table of Contents
Tignapoo MY-376 Wearable Electric Breast Pump
WEARABLE ELECTRIC BREAST PUMP
MY-376 Installation Guide
- Please read this Installation Guide carefully before use
Assembling
To assemble the electric breast pump, follow the steps below:
- Put the silicone diaphragm into the tee and use your hand Press so that the edges are firmly fastened and that it is completely sealed.
- Install the duckbill valve into the bottom of the tee, Make sure that it is loaded in the correct direction.
- Put the assembled tee part into the collecting bra, and align the “ear” part of the tee with the collecting braPress the disc part of the tee with both hands to fasten the edge firmly to ensure the safety and sealing.
- Attach the silicone shield to the milk collection container, align the guide groove of the silicone shield with the guide groove of the milk collection container and press the edge with both hands to ensure that it is seated correctly.
- Slide the breast pump main unit into the slot of the milk collection container, making sure that it fits perfectly into the container.
- The main unit can be charged by connecting the USB charging cable.
Reminder
- We do not provide the power adapter, if necessary, it can be purchased separately, with power adapter specifications. 5V—1A
Specifications
| Parameter | Specification |
|---|---|
| Power Adapter | Not included, can be purchased separately |
| Power Adapter Specifications | 5V—1A |
FAQ
- How do I ensure the silicone diaphragm is properly sealed?
- Press the edges of the silicone diaphragm firmly into the tee to ensure it is completely sealed.
- What is the correct direction to install the duckbill valve?
- The duckbill valve should be inserted into the bottom of the tee, making sure it is loaded in the correct direction indicated by the installation guide.
- How do I know if the silicone shield is seated correctly?
- Align the guide groove of the silicone shield with the guide groove of the milk collection container and press the edge with both hands to ensure proper seating.
- What should I do if I need a power adapter?
- The power adapter is not included with the breast pump. If necessary, it can be purchased separately with the recommended specifications of 5V—1A.
- Is there a specific way to charge the breast pump main unit?
- Yes, the main unit can be charged by connecting the USB charging cable to the charging port on the unit.
Installation Instructions
- To assemble the electric breast pump, follow the steps below Put the silicone diaphragm into the tee and use your hand Press so that the edges are firmly fastened and that it is completely sealed.
- Install the duckbill valve into the bottom of the tee, Make sure that it is loaded in the correct direction.
- Put the assembled tee part into the collecting bra, and align the “ear” part of the tee with the collecting braPress the disc part of the tee with both hands to fasten the edge firmly to ensure safety and sealing.
- Attach the silicone shield to the milk collection container, align the guide groove of the silicone shield with the guide groove of the milk collection container and press the edge with both hands to ensure that it is seated correctly.
- Slide the breast pump main unit into the slot of the milk collection container, making sure that it fits perfectly into the container.
- The main unit can be charged by connecting the USB charging cable.
Reminder
We do not provide the power adapter, if necessary, it can be purchased
separately, with power adapter specifications. 5V 1A.
Read User Manual Online (PDF format)
Loading......