HOMEDEPOT 1010851070 12FT Skelly With Servo User Guide

July 29, 2024
HOMEDEPOT

HOMEDEPOT 1010851070 12FT Skelly With Servo User Guide

HOMEDEPOT.COM

USA Item 1010851070
Model 24SV24665

ASSEMBLY REQUIRES AT LEAST 2 ADULTS, 3 ADULTS ARE RECOMMENDED.
PLEASE FOLLOW THE STEP BY STEP GUIDE AND ENJOY YOUR 12 FOOT SKELETON!

IMPORTANT TIPS:

  • If not functioning properly (eyes don’t light up), ensure that cables are connected to their corresponding cable as shown in the instruction sheet (See steps 5.1 and 7.2).
  • If item does not activate when turned on, ensure that the adapter is plugged into a live outlet.
  • If the Remote Control is not working. Make sure you are witching a 20 ft.
    range of the 12ft Skelly with Servo. If the issue persists, replace the batteries in the Remote Control with fresh batteries (2 x 1.5V AAA). If there is still a problem with your Remote Control, contact customer service.

PARTS LIST

  • A. Base x 1
  • B. Right Foot x 1
  • C. Left Foot x 1
  • D. Right Lower Support Pole x 1
  • E. Left Lower Support Pole x 1
  • F. Right Shin x 1
  • G. Left Shin x 1
  • H. Upper Support Pole x 2
  • I. Right Femur x 1
  • J. Left Femur x 1
  • K. Pelvis x 1
  • L. Spinal Support x 1
  • M. Rib Cage with Servo Head Bracket x 1
  • N. Right Humerus x 1
  • O. Left Humerus x 1
  • P. Right Forearm x 1
  • Q. Left Forearm x 1
  • R. Head x 1
  • S. Base Stabilizer x 4
  • T. Loop Screw x 1
  • U. Cable x 1
  • V. Stake x 4
  • W. Adapter * x 1
  • X. Remote Control x 1

Power Adapter * Spec
Input: 120V~60Hz
Output: 5.9V 3A
Wattage: 17.7W

TOOLS REQUIRED

NOTE: The 12ft Skelly with Servo has 3 different function settings (ON, SENSOR/TIMER, and OFF) and 8 different Eye Options
(MODES) to chose from – see images on box. Settings and Eye options can be controlled at the Control Panel or by using the Remote Control. Timer/Sensor setting is only available on the Skeleton Control Panel, located on the underside of the Pelvis (K).

OPERATION INSTRUCTIONS – CONTROL BOX:

Plug the power adapter into a standard power outlet. Locate the 2 push buttons on the control panel underneath the Pelvis (K). Middle Button is for ON/OFF and Sensor/Timer. Button at corner of panel is to select from 8 Eye options/modes.

NOTE: The 12ft Skelly with Servo is compatible with external timers and preserves its setting when the power is turned OFF/ON.
This Remote Control allows one to change the settings of the 12ft Skelly with Servo from up to 20 ft away. The Remote Control has an indicator light that lets you know if its working.

NOTE: Timer/Sensor setting can only be chosen from the Skeleton Control Panel, not with Remote Control.
NOTE: Requires 2 x 1.5V AAA batteries (Included)

  • You will need a small Phillips head screw driver Not included ). Locate the battery compartment on the product. Remove the battery compartment cover by using a small Phillips head screwdriver to unscrew the screw. After removing or installing the batteries, place the battery compartment cover into position, and secure the battery cover. If Skeleton is being stored while not in use, please remove battery in Remote Control.

CARE AND STORAGE INSTRUCTIONS

When not in use, store this product in its original packing. Keep away from heat and moisture.
NOTE: When not in use, store this product in its original packing. Keep away from heat and moisture. Remove batteries from Remote Control.

BATTERY WARNING:
Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel cadmium) batteries. Do not mix old and new batteries. Rechargeable batteries to be removed from the product before being charged. Only batteries of the same or equivalent type as recommended are to be used. Rechargeable batteries are only to be charged under adult supervision. Non-rechargeable batteries are not to be recharged. Batteries are to be inserted with the correct polarity. Remove batteries if exhausted or if product is to be left unused for a long time. The supply terminals are not to be short-circuited. Dispose of batteries safely. DO NOT DISPOSE OF BATTERIES IN FIRE, BATTERIES MAY EXPLODE OR LEAK

WARNING
This item is not a toy and should be used for decoration only. This item contains small parts that can be a choking hazard. Keep all plastic and wire parts away from children.

  1. Please use the adapter supplied by manufacturer.
  2. Please assemble item according to instructions. Connect all wires according to matching color.
  3. Children should be supervised by adults. Item should not be grabbed, as it becomes a tipping hazard. Keep flammables away from the adapter, as it heats up during operation. Please view all instructions carefully before assembling. Save this instruction sheet for future reference.

□ Lay product down before a storm or strong winds.
□ Don’t climb or pull on product.
□ Do not add to or modify unless accessory is designed for product
□ Assemble and place the product on level surfaces only.
□ Don’t push or tilt product.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

□ Reorient or relocate the receiving antenna.
□ Increase the separation between the equipment and receiver.
□ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
□ Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

Questions, problems, missing parts? Before returning to the store, please have a copy of your receipt ready and email the SVI customer experience team (customerservice@svius.com) within 90 days of the date of purchase or call Home Accents Holiday Customer Service 8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HOLIDAY (1-855-434-6543)
HOMEDEPOT.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

HOMEDEPOT User Manuals

Related Manuals