PHILIPS QP2724-30 One Blade Original Hybrid Face Electric Beard Trimmer Shaver User Guide

: June 15, 2024
: Philips

Table of Contents

My Philips OneBlade does not work
My Philips OneBlade does not shave as close as I expected

Troubleshooting

Philips OneBlade

My Philips OneBlade does not work

If your Philips OneBlade is not working, try our troubleshooting advice to fix this problem yourself.

OneBlade is plugged in

For safety reasons, the Philips OneBlade only works cordless. Check if your OneBlade is plugged into an electric socket. If yes, then try unplugging it and turning it on again. It should work now.

OneBlade is not charged

It is possible that your OneBlade is not charged properly. To charge your OneBlade, simply follow our instructions below or refer to the user manual.

Charging instructions for Philips OneBlade

Switch off your OneBlade.
Insert the charging cable into the socket at the bottom of your OneBlade and plug in the charger in any 120V AC power outlet. Make sure that you use the original Philips adapter to charge your OneBlade.

The blade is blocked or damaged

Check if the blade is clogged with hair or if it shows signs of wear and tear. If it is clogged, try rinsing it or soaking it in some lukewarm water until all of the hair and dirt is removed. Be careful not to tap your blade against a hard surface like the sink, as this can damage it. If the blade looks damaged, please replace it immediately.

Travel lock is activated

Some OneBlade models have a “travel lock”. If this is activated, the device will not turn on. Press the on/off button for 3 seconds to deactivate the travel lock.
If your OneBlade model has a digital display, a padlock symbol will appear on the display when the travel lock is activated.
If your OneBlade is still not working, please feel free to contact us for further support.

My Philips OneBlade does not shave as close as I expected

If you are not satisfied with the shaving results of your Philips OneBlade, read our troubleshooting advice below to solve this issue.

OneBlade is not meant to give a close shave

The Philips OneBlade is designed to trim your long facial hair for a clean look. If you are looking for a close, clean everyday shave, we would recommend one of our dedicated Philips Face Shavers.

Tips to use Philips OneBlade

To get the best results from your Philips OneBlade, make sure you follow the correct instructions on how to use it. Here are some useful shaving tips when using the OneBlade.

Clean your skin before using the OneBlade on it.
Place the blade flat on your skin to ensure full contact.
Move the blade against the grain.
Make long strokes while you press lightly.

Philips OneBlade

Documents / Resources

| PHILIPS QP2724-30 One Blade Original Hybrid Face Electric Beard Trimmer Shaver [pdf] User Guide
QP2724-30, QP2724-30 One Blade Original Hybrid Face Electric Beard Trimmer Shaver, QP2724-30, One Blade Original Hybrid Face Electric Beard Trimmer Shaver, Original Hybrid Face Electric Beard Trimmer Shaver, Face Electric Beard Trimmer Shaver, Beard Trimmer Shaver, Trimmer Shaver, Shaver
---|---