Anmaice CPX008A 12in Flush Mount Led Ceiling Light Fixtures Instruction Manual
- June 15, 2024
- Anmaice
Table of Contents
Installarion Manual
UNPACKING: Immediately upon receiving this product, make sure the wrap box is in good condition. In the case damage that may have occurred during shipping please contact your local dealer for replacement.
PRECAUTION:
- Do not attempt to open the product to prevent the risk of electrical shock
- Do not expose the indoor used product to the rain, or spill water or other liquids into or onto your product.(Unless specified otherwise)
- Be sure the local voltage of the outlet to which you are connecting this product is within the range stated on the box.
- Be sure the local voltage of the outlet to which you are connecting this product is within the range stated on the box.
- During long time no-use, please preserve the product in the dry and safe place.
- Always make sure there are no flammable sources close to the unit while operating such as radiators, stoves or other appliances that produce heat.
- In the event of serious operating problem, cut off the power immediately.
Always disconnect this product from the power source before cleaning or replacing.
| Model | CPX008A |
|---|---|
| LED | 24Watts + Night light |
| 2750 lm (3000K/4000K/5000K) | |
| 100~240 V 50/60Hz | |
| 80 Ra | |
| 25,000 Hrs. | |
| 12,500x | |
| <0.5 S |
Ultra-bright, 12inch 24Watts 2750Lm 3 color temperature optional and night light mode modern and simple design, Easier installation.
-
After unpacking, unscrew the hanging plate from the lamp body (rotate counterclockwise)
-
Slide button switch ① to choose your favorite color temperature from 3000K 4000K 5000K,
Slide button switch ② to choose the first lighting sequence from 24 watts and night light
-
Connect to AC 100-240V, the lamp body is made of insulating plastic, no grounding wire is required
-
Fix the hanging plate to the ceiling, here provide 2 kinds of screws
（If the two kinds of screws cannot meet your installation requirements, please purchase suitable screws according to the actual situation） -
Rotate the lamp body to the hanging board, and the installation is complete
