FLIR Thermal Imaging Monocular Instruction Manual
- June 15, 2024
- FLIR
Table of Contents
FLIR Thermal Imaging Monocular
Monocular Upgrade Operation Guide
- Copy the update_sd file into the root directory of the Micro SD card. Then Insert the SD card into the SD card slot of the monocular. before updating the firmware, please charge the battery until full）
- Press and hold on the zoom button (number 1), then press the power button (number 2) and hold on for 3 seconds to enter the upgrade mode.
- Observe through the eyepiece, and you can release the zoom button when the screen turns blue. The device starts to upgrade.
- It takes about 2-3 minutes for the device to automatically upgrade, and then the monocular will restart and enter the preview screen. At this point the upgrade is complete.
- Before updating, you can connect the “thermal connection “ APP, → version, and check the firmware version, after updating the firmware you can check the version again. it will be the newest one.
if you need to download a PDF user manual, Quick Start guide, or new firmware, please visit our Google Drive link: https://drive.google.com/drive/folders/19a3CfJihbyRe79aZ28W0DvA8NvDACAUD?usp=sharing
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>