IRON TRUSS FABRICATION F230827 Tundra Front Debris Shields Installation Guide

: June 15, 2024
: IRON TRUSS FABRICATION

Table of Contents

INSTALLATION INSTRUCTIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

IRON TRUSS FABRICATION F230827 Tundra Front Debris Shields

INSTALLATION INSTRUCTIONS

FRONT DEBRIS SHIELDS

ENSURE YOUR VEHICLE IS SECURED IN PLACE AND THE PARKING BRAKE IS ENGAGED
YOU DO NOT NEED TO REMOVE THE WHEELS FOR THIS INSTALLATION
WORKING ON A MOTOR VEHICLE HAS INHERENT RISKS. PROCEED WITH CAUTION

Verify contents of package.
a. 2022+ Tundra Front Debris Shield Parts/Materials Bag
i. 14 Plastic Push Rivet, Short
ii. 6 Plastic Push Rivet, Long
iii. 10 Fender Washer, Stainless Steel, Black”
b. 1 Front Debris Shield Passenger

c. 1 Front Debris Shield Driver

Remove the Front Most OEM Splash Guard by removing the 3 Push Rivets from the vehicle Frame/Body. Repeat on the Driver’s side and Passenger’s Side of the vehicle.
Remove the Rear Most OEM Splash guard by removing the 4 Push Rivets from the Vehicle Frame/Body.
Repeat on the Driver’s side and Passenger’s Side of the vehicle.
Remove the 3 Push Rivets Holding the OEM Felt Wheel Well liner to the body of the vehicle on the Passenger’s Side of the vehicle.
Place the Front Debris Shield Passenger into the wheel well over the top of the coil over.
Secure the Front Debris Shield Passenger in place UNDER the OEM felt wheel well liner with 1 Plastic
Push Rivet LONG and 1 Washer.
You might have to push/pull the Debris Shield toward the front/rear of the vehicle to align the holes on the vehicle body/frame as you install the Push Rivets
Secure the Rear most end of the Front Debris Shield Passenger in place with 3 Plastic Push Rivets SHORT and 3 Washers in the locations shown.
Secure the Rear most end of the Front Debris Shield Passenger in place with 1 Plastic Push Rivet LONG and 1 Washers in the location shown.
Secure the Front most end of the Front Debris Shield Passenger in place UNDER the OEM felt wheel well liner with 1 Plastic Push Rivet LONG and 1 Washer.
Secure the Front most end of the Front Debris Shield Passenger in place with 1 Plastic Push Rivet SHORT and 1 Washer.
Secure the Front most end of the Front Debris Shield Passenger in place onto the frame place with 2 Plastic Push Rivets SHORT and 2 Washers.
Locate this hole on the front end of the vehicle under the OEM felt wheel well liner.
Secure the Front most end of the Front Debris Shield Passenger in place 1 Plastic Push Rivet SHORT and 1 Washer.
The Front Debris Shield Passenger is now installed. Move onto the Driver’s Side.
Remove the 4 Push Rivets Holding the OEM Felt Wheel Well liner to the body of the vehicle on the Driver’s Side of the vehicle.
Place the Front Debris Shield Driver into the wheel well over the top of the coil over.
Feed the Front most end of the Front Debris Shield Driver between the washer fluid reservoir and the frame/body of the vehicle.
Secure the Front Debris Shield Driver in place UNDER the OEM felt wheel well liner with 1 Plastic Push Rivet LONG and 1 Washer.
You might have to push/pull the Debris Shield toward the front/rear of the vehicle to align the holes on the vehicle body/frame as you install the Push Rivets
Secure the front most end of the Front Debris Shield Driver in place UNDER the OEM felt wheel well liner with 1 Plastic Push Rivet SHORT and 1 Washer.
Secure the front most end of the Front Debris Shield Driver in place to the Vehicle Frame with 2 Plastic Push Rivets SHORT and 2 Washers.
Secure the rear most end of the Front Debris Shield Driver in place UNDER the OEM felt wheel well liner with 1 Plastic Push Rivet LONG and 1 Washer.
Secure the rear most end of the Front Debris Shield Driver in place UNDER the OEM felt wheel well liner with 1 Plastic Push Rivet LONG and 1 Washer
Secure the front most end of the Front Debris Shield Driver in place with 2 Plastic Push Rivets SHORT and 2 Washers.
Secure the rear most end of the Front Debris Shield Driver in place to the Vehicle Frame with 1 Plastic Push Rivet SHORT and 1 Washer.
The Front Debris Shield Driver is now installed.