SleepLux B08F2S1W6S Twin Air Mattress Supersoft Snugable Top Extra Durable Tough Guard Owner’s Manual
- June 15, 2024
- SleepLux
Table of Contents
SleepLux B08F2S1W6S Twin Air Mattress Supersoft Snugable Top Extra Durable Tough Guard
Information Instructions
DUAL FUNCTION: INFLATION & DEFLATION EXCLUSIVELY DESIGNED FOR AIR BEDS
NOTICE : READ CAREFULLY BEFORE OPERATING AND SAVE THESE INSTRUCTIONS.
CAUTION: TO AVOID THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE TO WATER OR
RAIN.
FOR INDOOR USE ONLY.
HOUSEHOLD USE ONLY.
WARNING:
- Unplug or disconnect the appliance from the power supply before using and servicing.
- This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way, if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
- To reduce the risk of electric shock or injury, use indoors only.
- Motor run time should not exceed 5 minutes. Operator should allow motor to cool for 5 minutes between uses.
- Children are strictly prohibited from operating pump.
- The air vent on the cover should be kept free of debris during use.
- Product must be stored in a dry location.
- After use, airbeds may require additional air to increase firmness. Add air to proper firmness
- Infants have suffocated on inflatable mattresses. Never place infant aged birth to 15 months to sleep on this inflatable air mattress/air bed. Infants can suffocate on an underinflated or deflated mattress, on bedding, by co-sleeping with another person, and by entrapment between the mattress and bed frame or between the mattress and a vertical surface.
- Children can be entrapped between the inflatable mattress and an adjacent vertical surface. Provide at least a shoulder width space between the inflatable mattress/airbed and adjacent vertical surfaces such as walls, dressers, or other objects.
- Always keep the inflatable mattress fully inflated when in use.
NOTE: Drawings for illustration purpose only. May not reflect actual
product. Not to scale.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Product Description
INFLATION
|
|
---|---|---
|
|
INFLATE WITH HAND PUMP (not included)
|
---|---
|
DEFLATION
| 
---|---
| 
|
MANUAL-DEFLATION
USB port.
Specification : DC 5V 1A The USB port can be powered when the pump plugs
into the socket.
CLEANING, MAINTENANCE & STORAGE
-
If product gets dirty, use a clean damp cloth and wipe gently on the surface. Do not use harsh detergents to clean. Fold and store after product is dried.
-
Deflate the airbed following the “DEFLATION” instructions.
-
Make sure all the air inside is removed so the bed can be folded to a minimum size (Fig1).
-
Once deflated, fold the airbed along the longest side, beginning at the outside edge of the mattress and folding inward toward the middle (Fig2). Make sure the deflation valve remains unobstructed. (Fig3)
-
When the mattress is folded lengthwise, fold in the other direction, beginning with the foot and carefully pushing out any remaining air as you fold toward the deflation valve. (Fig4)
-
Place the mattress in it’s storage bag and store in a cool and dry location away from chemicals and heavy or sharp objects. **(Fig6)
**
Documents / Resources
|
SleepLux B08F2S1W6S Twin Air Mattress Supersoft Snugable Top Extra Durable
Tough
Guard
[pdf] Owner's Manual
B08F2S1W6S Twin Air Mattress Supersoft Snugable Top Extra Durable Tough Guard,
B08F2S1W6S, Twin Air Mattress Supersoft Snugable Top Extra Durable Tough
Guard, Air Mattress Supersoft Snugable Top Extra Durable Tough Guard, Mattress
Supersoft Snugable Top Extra Durable Tough Guard, Supersoft Snugable Top Extra
Durable Tough Guard, Snugable Top Extra Durable Tough Guard, Top Extra Durable
Tough Guard, Extra Durable Tough Guard, Tough Guard, Guard
---|---