DUXOT AA2031-DX2059-JP-AU-3H-WD-NH35-VOL1.59-V1.0_Online Marcel Automatic Diver Instruction Manual

DUXOT AA2031-DX2059-JP-AU-3H-WD-NH35-VOL1.59-V1.0_Online Marcel Automatic

Diver

Product Information

Specifications:

• Model: Marcel Automatic Diver
• Movement: Self-winding Mechanical Automatic
• Power Source: User’s wrist motion
• Battery: Not required

Product Usage Instructions

Using the Screw-down Crown:

The screw-down crown is used to ensure water resistance. Follow  the steps below to use the screw-down crown:

1. Make sure your watch is not in an environment with moisture.
2. To unscrew, turn the crown anti-clockwise until it turns freely without tension.
3. Gently pull the crown out to the desired positions for the watch setting.
4. To screw, push the crown in towards the watch and turn clockwise until securely screwed down.
5. Remember to securely screw down the crown after setting the watch to maintain water resistance.

Winding the Mainspring:

Before using the watch, it is recommended to manually wind the mainspring to start it moving. Follow the steps below:

1. Unscrew the crown by turning it anti-clockwise.
2. When in a position [1], turn the crown clockwise to wind. Wind 5-10 times and it will start to move naturally after shaking slightly.
3. Push the crown in and then screw it securely.

Note : The watch must be worn for at least 8 hours each day to ensure it is fully wound. Winding the watch by the crown is not enough to allow the watch to function fully.

Setting the Time:

1. Unscrew the crown and pull it out to position [3] (2nd click).
2. Turn the crown clockwise to set the correct time.
3. Push the crown in and then screw it securely.
4. Take a.m./p.m. into consideration when setting the hour and minute hands.

Setting the Date:

1. Unscrew the crown and pull it out to position [2].
2. Turn the crown anti-clockwise to set the correct date.
3. Push the crown in and then screw it securely.
4. Do not set the date between 9:00 P.M. and 4:00 A.M.

Using a Deployant Clasp:

1. Flip the cover of the clasp.
2. Press the buttons on the clasp sides.

Resizing Metal Bracelet:

On the inside of the bracelet, you will see some small arrows engraved on removable links.

Frequently Asked Questions (FAQ)

• Q: How does the watch get powered?
  A: The watch is powered by the motions of the user’s wrist during wear. It does not need a battery.

• Q: Can I manually wind the watch?
  A: Yes, you can choose to manually wind the watch by following the instructions provided.

• Q: How long should I wear the watch each day?
  A: To ensure the watch is fully wound, it is recommended to wear it for at least 8 hours each day.

• Q: What should I do if my watch stops overnight or loses time?
  A: If your watch stops overnight or loses time, it means it is not being fully wound. Make sure to wear it for at least 8 hours each day to maintain proper functionality.

AUTOMATIC WATCH

• This timepiece is equipped with a self-winding Mechanical Automatic movement.
• It does not need a battery.
• It is powered by the motions of the user’s own wrist during the wear of the watch.
• You may also choose to wind the watch manually.

For more details on operating this timepiece please refer to the enclosed booklet or visit :
IM.DUXOTWATCHES.COM

PLEASE READ THE FOLLOWING BEFORE UNSCREWING THE CROWN:

SCREW-DOWN CROWN

• Screw-down crowns are used to ensure water resistance. ALWAYS be certain that your crown is securely screwed down ( Position [0] is secured.
• Positions [1], [2] and [3] are not secured for water resistance ).
• Do NOT unscrew your crown while you are in any environment where moisture is present.

USING THE SCREW-DOWN CROWN

DO NOT PULL THE CROWN UNLESS IT IS FIRST:

• TO UNSCREW: Turn the crown anti-clockwise until it turns freely without tension. GENTLY pull the crown out to the other desired positions for the watch setting (see specific operating instructions on the following pages).
• TO SCREW: Push the crown ALL THE WAY IN (towards the watch) THEN begin to turn clockwise until it is securely screwed down.

NOTE : Failure to SECURELY screw down the crown after setting the watch may affect its water resistance.

BEFORE YOU USE THIS WATCH, IT IS RECOMMENDED THAT YOU MANUALLY WIND  THE MAINSPRING TO START IT MOVING

THIS WATCH IS AN AUTOMATIC WATCH EQUIPPED WITH A MANUAL WINDING MECHANISM

WINDING THE MAINSPRING

1. Unscrew the crown by turning it anti-clockwise.
2. When it is in position [1], turn the crown clockwise to wind. Wind 5-10 times and it will start to move naturally after shaking slightly.
3. Push the crown in then screw it securely.

This watch MUST be worn for at least 8 (Eight) hours each day to ensure it is fully wound. An automatic watch will only wind when the watch is on your wrist and your arm moves. Winding the  watch by the crown will put power on the spring but not enough to allow the watch to function fully. If your watch stops overnight or loses time it means it is not being fully wound

HOW TO SET THE TIME

1. Unscrew the crown and pull it out to position  [3]-(2nd click).
2. Turn the crown clockwise to set the correct time.
3. Push the crown in then screw it securely.

Take a.m./p.m. into consideration when setting the hour and minute hands to the desired time.
Always be certain that your crown is SECURELY SCREWED; this will prevent moisture from entering in.

HOW TO SET THE DATE

1. Unscrew the crown and pull it out to position [2].
2. Turn the crown anti-clockwise to set the correct date.
3. Push the crown in then screw it securely

Do not set the date between 9:00 P.M. and 4:00 A.M.

HOW TO USE A DEPLOYMENT CLASP

1. Flip the cover.
2. Press the buttons on the clasp sides.

HOW TO RESIZE A METAL BRACELET

On the inside of the bracelet, you will see some small arrows engraved on removable links.

WATER RESISTANCE

• The water resistance indicated on your timepiece serves only as a guide. Actual water resistance may vary depending on several important factors including temperature, water salinity, and actual use underwater.
• The water resistance of your timepiece may eventually be compromised over time with general wear and tear and the use of your watch under adverse conditions.
• Always remember to employ the screw-down crown (if available) to maintain the water resistance of your timepiece. Warranty may be voided if the screw-down crown has not been properly employed.
• Note that you should NEVER wear your watch in a jacuzzi, hot shower or steam room where steam may enter the case despite the watertight seals used to protect your watch.
• The steam may cause condensation inside your watch, which may affect and damage the inner workings of your watch – which would also not be covered by the warranty.

References

• User Manuals – Duxot Watches

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>