DUXOT DX2056 Testudo Chronograph Watch Instruction Manual
- June 15, 2024
- DUXOT
Table of Contents
- Introduction
- INSTRUCTION FOR YOU
- SCREW-DOWN CROWN
- USING THE SCREW-DOWN CROWN
- HOW TO SET THE TIME
- HOW TO SET THE DATE
- USING THE SCREW-DOWN PUSH BUTTON
- STANDARD MEASUREMENT
- HOW TO USE A DEPLOYANT CLASP
- HOW TO RESIZE METAL BRACELET
- WATER RESISTANCE
- Customer Support
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
DUXOT DX2056 Testudo Chronograph Watch
Introduction
This watch is equipped with a quartz powered chronograph movement. Besides the normal time read out, this movement enables split timing micro measurements of time at the push of a button, which can be utilized in a variety of applications.
For more details on operating this timepiece please refer to the enclosed booklet or visit :
INSTRUCTION FOR YOU
PLEASE READ THE FOLLOWING BEFORE UNSCREWING THE CROWN:
SCREW-DOWN CROWN
Screw-down crowns are used to ensure water resistance. ALWAYS be certain that
your crown is securely screwed down ( Position [0] is secured. Positions [1],
[2] and [3] are not secured for water resistance ).
Do NOT unscrew your crown while you are in any environment where moisture is
present.
USING THE SCREW-DOWN CROWN
DO NOT PULL THE CROWN UNLESS IT IS UNSCREWED FIRST:
TO UNSCREW : Turn the crown anti-clockwise until it turns freely without tension. GENTLY pull the crown out to the other desired positions for watch setting (see specific operating instructions on the following pages).
TO SCREW : Push the crown ALL THE WAY IN (towards the watch) THEN begin to turn clockwise until it is securely screwed down.
NOTE: Failure to SECURELY screw down the crown after setting the watch may affect its water resistance.
HOW TO SET THE TIME
- Pull the crown to position [3]-(2nd click).
- Turn the crown clockwise to set the correct time.
- Push the crown in.
- Take a.m./p.m. into consideration when setting the hour and minute hands to the desired time.
- When the crown is at the position [3], do not press any button, otherwise the chronograph hands will move.
HOW TO SET THE DATE
- Pull the crown to position [2]-(1st click).
- Turn the crown clockwise to set the correct date.
- Push the crown in.
- Do not set the date between 9:00 P.M. and 3:00 A.M. , otherwise the day may not change properly. If it is necessary to set the date during the time period, first change the time to any time outside it, set the date and then reset the correct time.
USING THE SCREW-DOWN PUSH BUTTON
This watch is equipped with screw-down push button. The push button will not be able to be pressed until the button are unscrewed.
To screw-down the button – turn the washer around the button clockwise until
you encounter resistance.
To unscrew the button – turn the washer around the button anti-clockwise until
it is at its maximum height away from the case.
You will only be able to operate the functions of the chronograph when the buttons are unscrewed.
- The watch is only water resistant as marked to its specified depth if the button has been screwed down
- Buttons must never be unscrewed or be operated underwater.
STOPWATCH FUNCTION
- The stopwatch can measure up to 60 minutes.
STANDARD MEASUREMENT
ACCUMULATED ELAPSED TIME MEASUREMENT
Restart and stop of the stopwatch can be repeated by pressing the button A.
HOW TO USE A DEPLOYANT CLASP
- Flip the cover.
- Press the buttons on the clasp sides.
HOW TO RESIZE METAL BRACELET
On the inside of the bracelet, you will see some small arrows engraved on removeable links.
WATER RESISTANCE
The water resistance indicated on your timepiece serves only as a guide. Actual water resistance may vary depending on a number of important factors including temperature, water salinity, and actual use under water.
The water resistance of your timepiece may eventually be compromised over time with general wear and tear and the use of your watch under adverse conditions.
Always remember to employ the screw down crown (if available) to maintain the water resistance of your timepiece. Warranty may be voided if the screw down crown has not been properly employed.
Note that you should NEVER wear your watch in a jacuzzi, hot shower or steam room where steam may enter the case despite the watertight seals used to protect your watch.
The steam may cause condensation inside your watch, which may affect and damage the inner workings of your watch – which would also not be covered by the warranty.