B0CP3P3HNV Light Bulbs with Matter Smart Light Bulbs

Product Information

Specifications

• Model: MOW9A19-TS001
• Light Output: 800 lumens (60W equivalent)
• Input Power: 9W
• Color Temperature: 2700~6500K & RGB
• Network: Only supports 2.4GHz WiFi and IPv6 routers (not
  compatible with 5GHz)

Pre-Installation Checklist

Before installing the Caupureye A19 Matter bulb, please make
sure to:

1. Turn off the light switch controlling the light socket and wait
   for the bulb to cool down before attempting to replace the
   bulb.

2. Avoid installing the bulb with wet hands or on wet/damp
   surfaces.

3. Do not attempt to disassemble the bulb.

4. Ensure that the bulb is not used with standard wall dimmers,
   emergency lighting, or totally enclosed luminaries.

5. Use the bulb in an operating environment between -20 and 40
   degrees Celsius (-4 and 104 degrees Fahrenheit).

Set up Your Device via Matter

The Caupureye Smart Bulbs are compatible with Matter, a
connectivity standard for smart home and Internet of Things
devices. Follow the steps below to set up your devices via
Matter:

1. Instructions for using Matter products in Amazon Alexa
2. Instructions for using Matter products in Apple Home
3. Instructions for using Matter products in Google Home
4. Instructions for using Matter products in SmartThings
5. Instructions for using Matter products in uHome+ APP (no hub
   required)

Instructions for using Matter products in Amazon Alexa

1. Download the Alexa App from the Apple App Store or Google Play
   Store.

2. Sign up for an account with the Amazon Alexa app and sign
   in.

3. Set up the Alexa Smart Speaker:

   • If you have already set up your Alexa hub device and the
     speaker is online, skip to the next step.

   • Initiate the Alexa Speaker’s Setup Mode.

   • Echo 4 speakers are used as a home hub for instructions.

4. Install and Add the Smart Bulb to Alexa.

Frequently Asked Questions

• Q: What is the input power of the Caupureye A19 Matter
  bulb?

• A: The input power is 9W.

• Q: Can I use the bulb with standard wall dimmers?

• A: No, the bulb is not suitable for use with standard wall
  dimmers.

• Q: What is the operating temperature range for the bulb?

• A: The bulb can be used in an operating environment between -20
  and 40 degrees Celsius (-4 and 104 degrees Fahrenheit).

Content
Important Safety Information…………………………………………………………………1
Specifications……………………………………………………………………………………….2
Notes Pre-Installation Checklist…………………………………………………………….4
Set up Your Device via Matter………………………………………………………………. 5
Instructions for using Matter products in Amazon Alexa……………………………………..6 1. Download the Alexa App……………………………………………………………………………………………………6 2. Set up the Alexa Smart Speaker…………………………………………………………………………………………7 3. Install and Add the Smart Bulb to Alexa……………………………………………………………………………….13 4. Integrate Your Device into Another Ecosystem……………………………………………………………………. 24 Instructions for using Matter products in Apple Home……………………………………….. 28 1. Download the Apple Home App………………………………………………………………………………………….28 2. Set up the Apple HomePod Speaker………………………………………………………………………………….. 28 3. Install and Add the Smart Bulb to Apple Home App……………………………………………………………… 34 4. Integrate Your Device into Another Ecosystem……………………………………………………………………. 43

Instructions for using Matter products in Google Home……………………………………… 46 1. Download the Google Home App………………………………………………………………………………………..46 2. Set up the Google Nest Smart Speaker………………………………………………………………………………. 46 3. Install and Add the Smart Bulb to Google Home……………………………………………………………………51 4. Integrate Your Device into Another Ecosystem……………………………………………………………………..59 Instructions for using Matter products in SmartThings App…………………………………63 1. Download the SmartThings App………………………………………………………………………………………….63 2. Install and Add the Smart Bulb to SmartThings App……………………………………………………………… 64 3. Integrate Your Device into Another Ecosystem……………………………………………………………………..69 Instructions for using Matter products in uHome+ APP (no hub required)…………… 72 1. Download the uHome+ App………………………………………………………………………………………………..72 2. Install and Add the Smart Bulb to uHome+ App…………………………………………………………………….73 3. Integrate Your Device into Another Ecosystem……………………………………………………………………..79
Frequently Asked Questions………………………………………………………………….82
Warranty Policy……………………………………………………………………………………. 84
Customer Support……………………………………………………………………………………………………………….. 85

Important Safety Information
Before installing the Caupureye A19 Matter bulb, read and follow all precautions, including:
WARNING: RISK OF ELECTRIC SHOCK OR BURNS. Turn off the light switch controlling the light socket and wait for the bulb to cool down, before attempting to replace the bulb.
Do not install the bulb with wet hands or when standing on wet or damp surfaces. Do not attempt to disassemble the bulb. Not suitable for use with standard wall dimmers. Not for use in emergency lighting. Not for use in totally enclosed luminaries. Suitable for use in an operating environment between -20 and 40 (-4 and 104).
1

Specifications
Lighting Facts
Model: MOW9A19-TS001 Light Output: 800 lumens (60W equivalent) Input Power: 9 W
Color Temperature: 2700~6500K & RGB
Rated Input Voltage: 120 V~ 60 Hz Beam Angle: 220° Color Rendering Index: CRI

90 Current: 100mA Dimmer Switch Compatible: No Operation Temperature: -20~40(-4~104) Lifetime: 15000 H Diameter: 60mm(2.36inch) Height: 116mm(4.56inch) Weight: 80g(0.176LB)
Network
Only supports 2.4GHz WiFi and IPv6 routers (not compatible with 5GHz).
2

General
Package Contents for MOW9A19-TS001 (1-pack) 1 × Caupureye A19 Matter Smart Bulb 1 × Smart Light Bulb QR Code Sticker 1 × User Guide Package Contents for MOW9A19-TS001 (2-pack) 2 × Caupureye A19 Matter Smart Bulbs 2 × Smart Light Bulb QR Code Stickers 1 × User Guide Package Contents for MOW9A19-TS001 (4-pack) 4 × Caupureye A19 Matter Smart Bulbs 4 × Smart Light Bulb QR Code Stickers 1 × User Guide
3

Notes Pre-Installation Checklist:
The Matter setup code can only be used to add the device to the first ecosystem. For the second commissioning, you will need to open the app of the first ecosystem to generate a new setup code. A Matter hub (i.e., controller) and smart home app of the same ecosystem are required. Ensure your phone and Matter hub are both connected to a stable 2.4 GHz Wi-Fi network and that it has internet access during the setup process. The QR code stickers on each light bulb are in one-to-one correspondence, please keep them properly for subsequent setup of the light bulbs For matter setup guides for Alexa, Google, and Apple, please refer to our Youtube Channel
4

Set up Your Device via Matter
Caupureye Smart Bulbs work with Matter, which provides you with an optimal connectivity standard for smart home and Internet of Things devices, which aims to improve their compatibility and security.
It is a seal of approval that devices will work seamlessly together ­ today and tomorrow. Matter creates more connections between more objects, simplifies development for manufacturers, and increases compatibility for consumers.
The Matter Protocao seamlessly works with all the mainstream smart home ecosystems, such as Alexa, Google Home, and Apple Home. The following shows you how to set up your devices via Matter
1. Instructions for using Matter products in Amazon Alexa 2. Instructions for using Matter products in Apple Home 3. Instructions for using Matter products in Google Home 4. Instructions for using Matter products in SmartThings 5. Instructions for using Matter products in uHome+ APP (no hub required)
5

Instructions for using Matter products in Amazon Alexa
1. Download the Alexa App
Download the latest Amazon Alexa app from the Apple App Store or Google Play Store.
Sign up for an account with the Amazon Alexa app, and then sign in to the Amazon Alexa app with your account.
6

2. Set up the Alexa Smart Speaker 2.1 Initiate the Alexa Speaker’s Setup Mode
If you have set up your Alexa hub device and make sure the speaker is online, you can skip to 3. Install and Add the Smart Bulb to Alexa
Speakers are necessary to use and control Matter over WIFI or Matter over Thread devices (e.g. echo dot 5 supports Matter over WIFI, echo 4 supports Matter over WIFI and Matter over Thread), and we use echo 4 speakers as a home hub for instructions.
If the Echo 4 speaker is being set up for the first time, plug in the speaker and wait for the orange light at the bottom to illuminate.
If the Echo 4 speaker has been set up before, after plugging in the speaker, press and hold the wake button until the orange light at the bottom illuminates to initiate the setup mode.
7

2.2 Speaker Setup 2.2.1 Using Automatic Setup
Open the Amazon Alexa app for automatic setup, and wait until the speaker setup window pops up.
8

2.2.2 Using Manual Setup
Step 1: Tap ‘Device’ to enter the ‘Device’ page, then click the ‘+’ button in the top right corner to add a device for setup.

Step 2: Tap ‘Add Device.’

9

Step 3: Tap ‘Amazon Echo’.

Step 4: In the next step, tap ‘Echo, Echo Dot, Echo Plus, and more’.

10

Step 5: If your Echo device displays an orange light, tap ‘Yes’.

Step 6: Finally, search for the device and proceed with the setup process.

DONE
11

2.2.3 Check If the Speaker is Online
After a successful connection, you can use voice commands to wake up the device and determine if the speaker is online.
Alternatively, you can enter the control interface to adjust the speaker volume and check if it’s online.
12

3. Install and Add the Smart Bulb to Alexa
3.1 Keep the QR Code Sticker
Gently peel off the QR code sticker on the bulb and keep it for further setup (as each bulb has its own unique code, be sure to keep the sticker, or write down the number on the bottom).

xxxx-xxx-xxxx

3.2 Install the Smart Bulb
With the power off, screw in your Smart Bulb to a standard indoor socket.

13

3.3 Turn on the Light Bulb’s Setup Mode
When configuring the light for the first time, the light must be in the configuration state. The method to determine the configuration state is that the light will flash 3 times when it is powered on.
If it is not in the configuration state, you can restore the light to the configuration state through the following operations:
Switch the light on and off 5 times in a row, with an interval of about 1 second between each time. After 5 times, see the light flashing 3 times, that is to say, it is back to the configuration state. Then the bulb will be always bright. You will have 15 minutes to connect the APP and the bulb.
14

3.4 Add the Smart Light Bulb to Alexa
Step 1: Open the Amazon Alexa App, tap ‘Device’ to enter the ‘Device’ page, then click the ‘+’ button in the top right corner to add a device for setup.

Step 2: Tap ‘Add Device.’

15

Step 3: Scroll down to the ‘Other’ section

Step 4: Click on the Matter icon.

16

Step 5: Tap ‘Yes’ on the confirming page

Step 6: Choose the ‘Scan QR Code’ button

17

Step 7: Scan the Matter QR code (i.e., SN code) on the device or the QR code sticker.

Step 8: Follow the prompts to add the device, and when you see ‘Device found and connected’, which means the setup is successful.

xxxx-xxx-xxxx

DONE
18

Alternative Method: “TRY NUMERIC CODE INSTEAD’

Alternatively, you can also choose the ‘TRY NUMERIC CODE INSTEAD?’ button.

Then, tap ‘ENTER CODE.’

xxxx-xxx-xxxx
19

Input the device’s SN code in the ‘Numeric code’ field to add it.

Similarly, when you see ‘Device found and connected,’ it means the setup is successful.

DONE

20

3.5 Set up Your Smart Lights in the Alexa App

Step 1: After successfully adding the Matter device, tap ‘Lights’ to access the lighting device options.

Step 2: Locate the newly added device named ‘Caupureye A19 Matter Bulb’

21

Step 3: Tap to enter the control interface, which includes functions like turning the light on/off and adjusting its color.
22

3.6 Control Your Smart Lights via the Alexa Speaker
The device can also be controlled through the Alexa Echo 4 speaker. (‘ matter ‘ is the device name and can be customized.) Try the following commands:
“Alexa, turn on the matter.” “Alexa, turn off the matter.” “Alexa, change the matter to 10%.” “Alexa, change the matter to warmer.” “Alexa, change the matter to cooler.” “Alexa, change all the lights to green.”
23

4. Integrate Your Device into Another Ecosystem
The Matter smart bulb can be control through Amazon Alexa, google home, and APPLE home app. But, as the setup code can only be used to add the device to the first ecosystem, for the second commissioning, you need to open the app in the first ecosystem to generate a new setup code
Step 1: In the Amazon Alexa App’s Add Device Details page, tap the Settings button in the upper right corner, and go to the SETTINGS page.
24

Step 2: Tap ‘Other Assistants and Apps’.

Step 3: Then tap “Add Another” to generate a new SN code for crossplatform sharing pairing.

25

Step 4: The pairing mode last for 15 minutes.
26

Step 5: According to the newly generated SN code of the device, manually add the Matter device on other platforms’ apps. Please refer to: Instructions for using Matter products in Apple Home Instructions for using Matter products in Google Home Instructions for using Matter products in the SmartThings App Instructions for using Matter products in uHome+ APP (no hub required) Note: For cross-platform sharing, ensure that all networks are within the same local area network.
27

Instructions for Using Matter products in Apple Home
1. Download the Apple Home App
Ensure your iPhone has been updated to iOS 16.3 or higher iOS version, and your iPhone has downloaded the latest Apple Home app. If not, you can download it from the Apple Store. Open the Apple Home App and log in with your Apple ID.
2. Set up the Apple HomePod Speaker
If you have set up your Apple Homepod device and make sure the speaker is online, you can skip to 3. Install and Add the Smart Bulb to Apple Home
Speakers are necessary to use and control Matter over WIFI or Matter over Thread devices. We use HomePod mini speakers as a home hub for instructions.
28

2.1 Initiate the HomePod’s Setup Mode
For the initial setup of the speaker, plug in the HomePod mini and wait for the light on the top to turn white and pulse rhythmically. If this is not the initial setup, unplug the HomePod mini for more than 10 seconds after powering it off when it’s plugged in. Then, power it on again and wait for the top light to rotate in white. Press and hold the button on the top until you hear three beeps. The rotating white light on the device will turn red, indicating that it’s been reset.
29

2.2 Speaker Setup 3.2.1 Using Automatic Setup
Place your Apple iPhone close to the HomePod mini speaker until the setup window for the speaker appears on the screen. Then, tap ‘Set up’.
30

2.2.2 Using Manual Setup
Step 1: Open the Apple Home App, tap the ‘+’ icon in the top right corner to enter the page, and select ‘Add or Scan Accessory’ to add the device.

Step 2: After the ‘Add Accessory’ window pops up, tap ‘More options…’.

31

Step 3: In the ‘Select an Accessory to Add to HomeKit’ list, tap on ‘HomePod’. Follow the on-screen instructions to complete the setup.
32

2.2.3 Check If the Speaker is Online
After a successful connection, tap the HomePod icon to access the control interface. Adjust the speaker volume to determine if the speaker is online.
33

3. Install and Add the Smart Bulb to Apple Home App

3.1 Keep the QR Code Sticker
Gently peel off the QR code sticker on the bulb and keep it for further setup (as each bulb has its own unique code, be sure to keep the sticker, or write down the number on the bottom).

xxxx-xxx-xxxx

3.2 Install the Smart Bulb
With the power off, screw in your Smart Bulb to a standard indoor socket.

34

3.3 Turn on the Light Bulb’s Setup Mode
When configuring the light for the first time, the light must be in the configuration state. The method to determine the configuration state is that the light will flash 3 times when it is powered on.
If it is not in the configuration state, you can restore the light to the configuration state through the following operations:
Switch the light on and off 5 times in a row, with an interval of about 1 second between each time. After 5 times, see the light flashing 3 times, that is to say, it is back to the configuration state. Then the bulb will be always bright. You will have 15 minutes to connect the APP and the bulb.
35

3.4 Add the Smart Light Bulb to Apple Home App

Step 1: Open the Apple Home App, tap the ‘+’ icon in the top right corner to enter the page, and select ‘Add or Scan Accessory’ to add the device.

Step 2: Then, scan the Matter QR code (i.e., SN code) of the device. Or tap ‘More options…’ to add the light bulb by entering the code.

36

Step 3: Choose a location for your device.

Step 4: For the convenience of subsequent use, please rename your device.

37

Alternative Method: “Enter Code…’
Step 1: Alternatively, tap the ‘+’ icon in the top right corner to enter the page, and select ‘Add or Scan Accessory’ to add the device.

Step 2: After the ‘Add Accessory’ window pops up, tap ‘More options…’.

38

Step 3: Then, tap ‘My Accessory Isn’t Shown Here’ in the new window.

Step 4: Next, tap ‘Enter code…’ in the new window again.

39

Step 5: Input the device’s SN code in the ‘Setup Code’ field to add it.

Step 6: Choose a location for your device and rename it.

40

3.5 Set up Your Smart Lights in the Apple Homes App
After successfully adding the Matter device, tap the bulb icon to enter the control interface, which includes dimming and color adjustment functions (double-click any color point to enter the color wheel adjustment).
41

3.6 Control Your Smart Lights via the Apple HomePod
The device can also be controlled through the Apple HomePod speaker. (‘ matter ‘ is the device name and can be customized.) Try the following commands:
“Hey Siri, turn on the matter.” “Hey Siri, turn off the matter.” “Hey Siri, change the matter to 10%.” “Hey Siri, change the matter to warmer.” “Hey Siri , change the matter to cooler.” “Hey Siri, change the matter to green.”
42

4. Integrate Your Device into Another Ecosystem
The Matter smart bulb can be control through Amazon Alexa, google home, and APPLE home app. But, as the setup code can only be used to add the device to the first ecosystem, for the second commissioning, you need to open the app in the first ecosystem to generate a new setup code
Step 1: In the Matter device control interface of the Apple Home App, tap the ‘Settings’ button in the bottom right corner.
43

Step 2: On the new page that appears, scroll down and tap the ‘Turn On Pairing Mode’ option.

Step 3: A popup will appear to generate a new SN code for cross-platform sharing pairing. The pairing mode will remain active for 15 minutes

44

Step 4: According to the newly generated SN code of the device, manually add the Matter device on other platforms’ apps. Follow the prompts to add. Please refer to: Instructions for using Matter products in Amazon Alexa Instructions for using Matter products in Google Home Instructions for using Matter products in the SmartThings App Instructions for using Matter products in the uHome+ App (no hub required) Note: For cross-platform sharing, ensure that all networks are within the same local area network.
45

Instructions for Using Matter products in Google Home
1. Download the Google Home App
Ensure your phone has downloaded the Google Home App. If not, you can download it from the Google Play Store. Open the Google Home App and log in to your account.
2. Set up the Google Nest Smart Speaker
If you have set up your Google Nest device and make sure the speaker is online, you can skip to 3. Install and Add the Smart Bulb to Google Home
The speaker is a necessary requirement for using and controlling Matter over WIFI or Matter over Thread devices. In this guide, we will use the Google Nest Mini speaker as the central hub for operations (Google Nest Mini supports Matter over WIFI; Google Nest Hub 2 supports both Matter over WIFI and Matter over Thread).
46

2.1 Initiate the Google Nest’s Setup Mode
For the initial setup of the speaker, plug in the Google Nest Mini speaker, turn off the microphone switch, and wait for the indicator light to turn orange. If this is not the initial setup, after powering on the Google Nest Mini speaker, turn off the microphone switch, then press and hold the center of the top indicator light until you hear a voice prompt to reset.
47

2.2 Speaker Setup 2.2.1 Using Automatic Setup
Open the Google Home App and bring your phone close to the Google Nest Mini speaker until the screen displays a detected device. Then, tap ‘Set up’ on the page and follow the on-screen instructions.
48

2.2.2 Using Manual Setup
Step 1: Open the Google Home App, go to the ‘Devices’ interface, and tap the ‘+ Add’ button in the bottom right corner to enter the page.

Step 2: After the ‘Set up a device’ window appears, tap the ‘New device’ option. Then, follow the on-screen instructions.

49

2.2.3 Check If the Speaker is Online
After a successful connection, long-press the Google Nest Mini speaker icon to access the control interface. Adjust the speaker volume to determine if the speaker is online.
50

3. Install and Add the Smart Bulb to Google Home
3.1 Keep the QR Code Sticker
Gently peel off the QR code sticker on the bulb and keep it for further setup (as each bulb has its own unique code, be sure to keep the sticker, or write down the number on the bottom).

xxxx-xxx-xxxx

3.2 Install the Smart Bulb
With the power off, screw in your Smart Bulb to a standard indoor socket.

51

3.3 Turn on the Light Bulb’s Setup Mode
When configuring the light for the first time, the light must be in the configuration state. The method to determine the configuration state is that the light will flash 3 times when it is powered on.
If it is not in the configuration state, you can restore the light to the configuration state through the following operations:
Switch the light on and off 5 times in a row, with an interval of about 1 second between each time. After 5 times, see the light flashing 3 times, that is to say, it is back to the configuration state. Then the bulb will be always bright. You will have 15 minutes to connect the APP and the bulb.
52

3.4 Add the Smart Light Bulb to Google Home App

Step 1: Open the Google Home App, go to the ‘Devices’ interface, and tap the ‘+’ button in the bottom right corner to enter the page.

Step 2: After the ‘Set up a device’ window appears, tap the ‘New device’ option.

53

Step 3: Follow the prompts to reach the ‘Looking for devices’ screen.

Step 4: Then, in the ‘What are you setting up?’ screen, select the ‘Matter- enabled device’ option.

54

Step 5: Next, scan the Matter QR code (i.e., SN code) of the device. Or tap ‘Continue without scanning’ to add the light bulb by entering the code.

Step 6: Finally, follow the instructions to complete the addition of the Matter device.

55

Alternative Method: “Continue without scanning’
Alternatively, in the scanning interface, tap ‘Continue without scanning.’ Proceed to the ‘Enter Matter pairing code’ screen and input the SN code to add the Matter device.
56

3.5 Set up Your Smart Lights in the Google Home App
After successfully adding the Matter device, on the ‘Devices’ page, long-press the ‘Accessory’ icon for the bulb to enter the control interface. This interface includes dimming and color adjustment functions (tap ‘Color’ to access the color options screen).
57

3.6 Control Your Smart Lights via the Google Nest
The device can also be controlled through the Google Nest speakers. (‘ matter ‘ is the device name and can be customized.) Try the following commands:
“Hey Google, turn on the matter.” “Hey Google, turn off/on the matter.” “Hey Google, change the matter to 10%.” “Hey Google, change the matter to warmer.” “Hey Google, change the matter to cooler.” “Hey Google, change the matter to green.”
58

4. Integrate Your Device into Another Ecosystem
The Matter smart bulb can be control through Amazon Alexa, google home, and APPLE home app. But, as the setup code can only be used to add the device to the first ecosystem, for the second commissioning, you need to open the app in the first ecosystem to generate a new setup code
Step 1: In the Matter device control interface of the Google Home App, tap the ‘Settings’ button in the bottom right corner. This will take you to a new page.
59

Step 2: Then, tap the ‘Linked Matter apps & services’ option.

Step 3: In the new page that appears, tap ‘Link apps & services’ once again.

60

Step 4: Finally, a new SN code will be generated, and the pairing mode will remain active for 15 minutes.
61

Step 5: According to the newly generated SN code of the device, manually add the Matter device on other platforms’ apps. Follow the prompts to add. Please refer to: Instructions for using Matter products in Amazon Alexa Instructions for using Matter products in Apple Home Instructions for using Matter products in the SmartThings App Note: For cross-platform sharing, ensure that all networks are within the same local area network.
62

Instructions for using Matter products in SmartThings App
1. Download the SmartThings App
Download the latest “SmartThings” app from the Apple App Store or Google Play Store.
Sign up for an account with the SmartThings app, and then sign in with your account.
63

2. Install and Add the Smart Bulb to SmartThings App

2.1 Keep the QR Code Sticker
Gently peel off the QR code sticker on the bulb and keep it for further setup (as each bulb has its own unique code, be sure to keep the sticker, or write down the number on the bottom).

xxxx-xxx-xxxx

2.2 Install the Smart Bulb
With the power off, screw in your Smart Bulb to a standard indoor socket.

64

2.3 Turn on the Light Bulb’s Setup Mode
When configuring the light for the first time, the light must be in the configuration state. The method to determine the configuration state is that the light will flash 3 times when it is powered on.
If it is not in the configuration state, you can restore the light to the configuration state through the following operations:
Switch the light on and off 5 times in a row, with an interval of about 1 second between each time. After 5 times, see the light flashing 3 times, that is to say, it is back to the configuration state. Then the bulb will be always bright. You will have 15 minutes to connect the APP and the bulb.
65

2.4 Add the Smart Light Bulb to SmartThings APP

Step 1: Tap the “+” button in the SmartThings app

Step 2: Scan the setup QR code on your device,Or you may choose “Enter” to input the 11 digit code as well.

66

Step 3: Click “start” to add a device.
67

Step 4: Choose the network and input the Wi-Fi password, then rename the device.
68

3. Integrate Your Device into Another Ecosystem
The Matter smart bulb can be control through Amazon Alexa, google home, and APPLE home app. But, as the setup code can only be used to add the device to the first ecosystem, for the second commissioning, you need to open the app in the first ecosystem to generate a new setup code
Step 1: Click the device to enter the Device Settings page, and then click: Share with other services
69

Step 2: Click on the another app that needs to be shared to add automatically or get the QR Code to add manually
70

Step 3: According to the newly generated SN code of the device, manually add the Matter device on other platforms’ apps. Follow the prompts to add. Please refer to: Instructions for using Matter products in Amazon Alexa Instructions for using Matter products in Apple Home Instructions for using Matter products in Google Home Note: For cross-platform sharing, ensure that all networks are within the same local area network.
71

Instructions for using Matter products in uHome+ APP (no hub required)
Remarks: For the sake of data compliance, the uhome+ app currently only supports device control within the LAN, and does not support remote control for the time being.
1. Download the uHome+ App
Download the latest “uHome+” app by Uascent-IoT from the Apple App Store or Google Play Store.
Sign up for an account with the uHome+ app, and then sign in with your account.
72

2. Install and Add the Smart Bulb to uHome+ App
2.1 Keep the QR Code Sticker
Gently peel off the QR code sticker on the bulb and keep it for further setup (as each bulb has its own unique code, be sure to keep the sticker, or write down the number on the bottom).

xxxx-xxx-xxxx

2.2 Install the Smart Bulb
With the power off, screw in your Smart Bulb to a standard indoor socket.

73

2.3 Turn on the Light Bulb’s Setup Mode
When configuring the light for the first time, the light must be in the configuration state. The method to determine the configuration state is that the light will flash 3 times when it is powered on.
If it is not in the configuration state, you can restore the light to the configuration state through the following operations:
Switch the light on and off 5 times in a row, with an interval of about 1 second between each time. After 5 times, see the light flashing 3 times, that is to say, it is back to the configuration state. Then the bulb will be always bright. You will have 15 minutes to connect the APP and the bulb.
74

2.4 Add the Smart Light Bulb to uHome+ APP

Step 1: Tap the “+” button in the uHome+ app

Step 2: Tap the scan button.

75

Step 3: Scan the QR Code

Step 4: Select the 2.4GHz WiFi network and enter the password

xxxx-xxx-xxxx
76

Step 5: Connect the Matter device.

Step 6: Rename your Matter device

77

Step 7: Set up your light bulb.
78

3. Integrate Your Device into Another Ecosystem
The Matter smart bulb can be control through Amazon Alexa, google home, and APPLE home app. But, as the setup code can only be used to add the device to the first ecosystem, for the second commissioning, you need to open the app in the first ecosystem to generate a new setup code
Step 1: Tap the device and enter the setting page. Click “Device share” button
79

Step 2: Then, tap the ‘Use pairing code’ or ‘Use QR code’ option.

Step 3: Finally, a new SN code will be generated, and the pairing mode will remain active for 15 minutes.

80

Step 4: According to the newly generated SN code of the device, manually add the Matter device on other platforms’ apps. Follow the prompts to add. Please refer to: Instructions for using Matter products in Amazon Alexa Instructions for using Matter products in Apple Home Instructions for using Matter products in Google Home Instructions for using Matter products in the SmartThings App Note: For cross-platform sharing, ensure that all networks are within the same local area network.
81

Frequently Asked Questions:
Failed to add a device? a. Please confirm that the mobile phone using the App is connected to 2.4GHz WiFi and that the hubs (controllers) are also connected to the same router. b. You can try to restart the hubs, App, or mobile phone. c. Please confirm that the Internet Protocol of your home network is IPv6. If not, please enable an IPv6 Internet connection, you may scan the QR code for the instructions on Enabling and Configuring IPv6 on Windows
Scan the QR code, but it prompts error/no response Please confirm whether the App software version meets the minimum version requirements.
Prompt that the device cannot be found a. Network distribution for the first time (the device is in the factory state):
Please power on the device again, and confirm that the device is in the factory state. (Please refer to “Turn on the Light Bulb’s Setup Mode”)
82

b. Multi-ecological distribution network (the device has been configured and shared with

other hubs/apps):

Please confirm that all devices are in the same local area network (connected to the

same router) and that the device pairing mode has been turned on.

How can I reset the device?

You can reset the light to the configuration state through the following operations:

1. Switch the light on and off 5 times in a row, with an interval of about 2 seconds between

each time.

2. After 5 times, see the light flashing 3 times, that is to say, it is back to the configuration

state.

3. Then the bulb will be always bright. You will have 15 minutes to connect the APP and

the bulb.

How can I get more support?

a. Email: caupureye@outlook.com

b. Scan the QR code for more support.

Customer Support

83

Warranty Policy:
Thank you for purchasing our products. 1. Within the scope of normal use (excluding man-made damage), this product has two years of quality assurance and warranty from the date of purchase. During this period, if there is a quality problem, please contact us at caupureye@outlook.com. 2. The start date of the warranty period is based on the product purchase date. The following cases are not covered by warranty: Man-made damage caused by improper use, such as improper power supply, use of improper accessories, improper installation, use not in accordance with the instructions, damage caused by misuse or negligence, etc.; damage caused by transportation and other accidents; Repairs and modifications approved by the company; other damages caused by force majeure (such as natural disasters, abnormal voltage, etc.). Product aging, wear, etc. caused by normal use but does not affect the normal use of the product.
84

3. If you need more after-sale support about our products, please contact us at caupureye@outlook.com. We will reply to you within 24 hours. For more information about our product, please refer to our YouTube Channel.
Customer Support
85

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>