COOLER MASTER Cooling X Shows Off Cooling X User Manual
- June 15, 2024
- COOLER MASTER
Table of Contents
Cooling X
FCC | CE
Operational Description
December 6 2023
Usage
Cooler Master Cooling X is a plug and play complete liquid cooled PC that utilizes the side panels as a reservoir and a heatsink simultaneously. It utilizes a proprietary liquid cooling solution that is very unique. It allows to dissipate the heat semi passively and keep the size of the PC very compact and noise levels to a minimum. It is a pre-build PC and it is prohibited to open it an upgrade or alternate components. In case users ignore this, the warranty will be void.
Hardware
2.1 Component include Xtal
- CPU: AMD Ryzen® 9 7959X3D
- Motherboard: MSI B6501 Edge WiFi
- GPU: NVIDIA GeForce RTX™ 4080
- Graphic Card: Zotac Gaming GeForce RTX 4080 16GB Trinity Black Edition
- RAM:2x32GB dual channel DDR5-5600
- Storage: 2 x2TB M2 PCle4.0 NVMe SSD
- Power Supply: Cooler Master V850 SFX Gold
2.2 IC Reader Port, Magnetic Port, Contactless I/O Interface
2.2.1 Motherboard
- Clear CMOS button
2) HDMiport
3 USB32Genl 5Gbps Type-A ports
4) USB32Gen210Gbps Type-A ports - 25Gbps LAN jack
- WiFi Antenna Connector| 7) Line-nJack
- Flash BIOS button
9) USB32Gen210Ghps Type-A port - USB32Gen2x2 (20Gbps) Type-C port
- USB32Gen210Ghps Type-A port
12) Line-Out Jack - Mic-In Jack
---|---
2.2.2 Graphics Card
NVIDIA GeForce RTX 4080 16GB GPU
- 9728 CUDA cores
- 16GB GDDR6X memory
- 256-bit memory bus
- Engine boost clock: 2520 MHz
- Memory clock: 22.4 Gbps
- PCl Express 4.0 16x
USB Gen2.2 20Gbps Type-C Rear Panel Connector
This connector allows to connect USB Type-C connector at the rear panel. The
connector possess a foolproof design. When connecting the cable, be sure to
connect it with the corresponding orientation.
USB Gen2 10Gbps Type-A Rear Panel Connectors
These connectors allow to connect USB Type-A connectors at the rear panel. The
connector’s possess foolproof design. When connecting the cable, be sure to
connect it with the corresponding orientation.
2.2.3 LAN Port LED Status Table
LAN Port LED Status Table
Audio Jacks Connection
Audio jacks to headphone and microphone diagram
Audio jacks to stereo speakers diagram
Audio jacks to 4-channel speakers diagram
2.3 Window T1 Wi-Fi Wireless Network Access To The Internet
Windows 11 Operating System
-
Click the network icon on the taskbar 1 and then click > icon to manage the Wi-Fi connections 3.
The icon display will be different depending on your current connection status. (
Not currently connected to the network . Connected to the Wi-Fi wireless network, : Connected to the wired network).
-
Select the wireless network you require and click [Connect] 3. If you check Automatically connect, your computer will automatically connect to the wireless network when it is in that network environment.
If you find the Wi-Fi is shown as turned off, please click the switch in the upper right corner to turn the Wi-Fi back on.
-
Enter the wireless network password 4 and click [Next] 5 .
-
After the connection is successful, the wireless network will be displayed as connected and the network icon will change to .
2.4 Enable Bluetooth
-
To connect to Bluetooth devices, click the network icon icon on the taskbar 1 and then click icon 2 to enable Bluetooth.
-
Tosee an overview of the available Bluetooth devices, click on the icon 3 and the list 4 will be visible.
-
Select the Bluetooth device you like to contact to and wait till the connection is established.
2.5 Power Supply
| Model | MPY-8501-SFHAGV-3XX |
|---|---|
| ATX Version | ATX3.0, SFX 12V Ver. 342 |
| PFC | Active PFC |
| Input Voltage | 100-240V |
| Input Current | 12-6A |
| Input Frequency | 50-60Hz |
| Dimensions (L x W x H) | 100 x 125 x 63.5 mm |
| Fan Size | 92 mm |
| Fan Bearing | FDB |
| Efficiency | 90% @ Typical Load |
| 80 PLUS Rating | 80 PLUS Gold |
| ETA Rating | Gold |
| LAMBDA Rating | Standard+ |
| ErP 2014 Lot 3 | Yes |
| Operating Temperature | 0-50°C |
| Power Good Signal | 100 – 500 ms |
| Hold Up Time | 16ms |
| MTBF | >100,000 Hours |
| Protections | QOVP, OPP, SCP, OCP, UVP, OTP, Surge and. Inrush Protection |
| Regulatory | TUV, cTUVus, CE, BSMI, FCC, CCC, EAC, RCM, CB, UKCA |
| ATX 24 Pin Connectors | 1 |
| EPS 4+4 Pin Connectors | 1 |
| EPS 8 Pin Connector | 1 |
| SATA Connectors | 2 |
| Peripheral 4 Pin Connectors | 1 |
| PCl-e 6+2 Pin Connectors | 2 |
| 12VHPWR Connector | 1 |
| Series | V SFX Series |
| 80 Plus | Gold |
| Modular | Full Modular |
| Wattage | Above 750W |
2.5 RF Transmitters
Standard:
IEEE802.11a; IEEE802.11b; IEEE 802.11g; IEEE 802.11n; IEEE 802.T1ac;
IEEE802.11ax; IEEE802.11d; IEEE802.T1e; IEEEB02.11h; IEEE8O2.11i;
BT v2.1+EDR/3.0/4.0/4.1/4.2/5.0
Bus Interface:
Complies with PCI Express for WLAN
Complies with USB for BT
Form Factor:
M.2 2230-AE
Data Rate:
802.11b: 11, 5.5, 2,1 Mbps;
802.11g: 54, 48, 36, 24, 18,12, 9, 6 Mbps
802.11a: 54, 48, 36, 24,18, 12,9, 6 Mbps
802.11n:
HT20 mode: MCSO to 15
HT40 mode: MCSO to 15
802.11ac:
VHT20 mode: NSS1MCSO0 to 8; NSS2 MCSO to 8;
VHT40 mode: NSSTMCSO0 to 9; NSS2 MCSO to 9;
VHT80 mode: NSS1 MCSO0 to 9; NSS2 MCSO to 9;
VHTI60 mode: NSSTMCSO to 9; NSS2 MCSO to 9;
802.11ax:
HE20 mode: NSS1~2 MCSO to 11; NSS2 MCSO to 17;
HE40 mode: NSS1~2 MCSO to 11; NSS2 MCSO to 1;
HE80 mode: NSS1~2 MCSO to 11; NSS2 MCSO to T1;
HE160 mode: NSS1~2 MCSO to 11; NSS2 MCSO to 11;
BT: IMbps for basic rate, 2Mbps/3Mbps for enhanced data rate
Modulation Techniques:
802.11b: CCK, DQPSK, DBPSK
802.11g: 64QAM,16QAM, QPSK, BPSK
802.11a: 64QAM,16QAM, QPSK, BPSK
802.11n: 64QAM,16QAM, QPSK, BPSK
802.1ac: 256-QAM, 64-QAM, 16-QAM
, QPSK, BPSK
802.1ax: Up to 1024QAM
BT: 8DPSK, 7 /4-DQPSK, GFSK
Frequency Range:
-
ForCE
Wi-Fi: 2412~2472MHz, 5150~5350MHz, 5470~5850MHz, 5945~6425MHz
BT: 2402~2480MHz -
ForFCC
Wi-Fi: 2412~2472MHz, 5150~5250MHz, 5250~5350MHz, 5470~5725MHz,
5725~5850MHz, 5925~7125MHz
BT: 2402~2480MHz
Operating Channel (see Appendix for Wi-Fi channelization):
Wi-Fi 2.4GHz:
Channels
1-11 with active scan
Channels 12-13 with passive scan,
Channels 14 with no scan
Wi-Fi 5GHz (This setting of ID support worldwide mode by default):
Band 1: CH36~CH48; Band 3: CH100~CH140;
Band 2: CH52~CH64; Band 4: CH149~CH165;
Wi-Fi 6GHz (This setting of ID support worldwide mode by default):
CH1~CH233;
BT: (CHO~78)
Support OS:
Win10 system on normal driver
Transmit Output Power for CE:
| Radio Type / Description | Transmitter Frequency (MHz) | Maximum Output Power |
|---|---|---|
| Bluetooth | BR+EDR | 2402 – 2480 |
| Low Energy | 2402 – 2480 | 8±1 dBm |
| WLAN 2.4G | 802.11b | 2412 – 2472 |
| 802.11g | 2412 – 2472 | 16±1 dBm |
| 802.11ax 20 | 2412 – 2472 | 16±1 dBm |
| 802.11ax 40 | 2412 – 2472 | 16±1 dBm |
| WLAN 5G | 802.11a | 5150 – 5350 |
| 5470 – 5725 | 16±1 dBm | |
| 5725 – 5850 | 8±1 dBm | |
| 802.11ac_20M | 5150 – 5350 | 16±1 d Bm |
| 5470 – 5725 | 16±1 dBm | |
| 5725 – 5850 | 9±1 dBm | |
| 802.11ac_40M | 5150 – 5350 | 18±1 dBm |
| 5470 – 5725 | 18±1 dBm | |
| 5725 – 5850 | 9±1 dBm | |
| 80211ac_80M | 5150 – 5350 | 18±1 dBm |
| 5470 – 5725 | 18±1dBm | |
| 5725 – 5850 | 8±1 dBm | |
| 80211ac_160M | 5150 – 5350 | 18±1dBm |
| 5470 – 5725 | 18±1dBm | |
| WLAN 6G | 802.11a | 5945 – 6425 |
| 802.11ax 20 | 5945 – 6425 | 18±1 dBm |
| 802.11ax 40 | 5945 – 6425 | 18±1dBm |
| 802.11ax 80 | 5945 — 6425 | 18±1dBm |
| 802.11ax 160 | 5945 — 6425 | 18±1dBm |
| Antenna Type | Frequency | |
| --- | --- | |
| PIFA | 22 dBi@ ANTI_2.4 GHz |
3.29 dBi@ ANTI_5.15~5.895 GHz
4.19 dBi@ ANTI_5.925~6.425 GHz
3.99 dBi@ ANTI_6.425~6.525 GHz
4.18 dBi@ ANTI_6.525~6.875 GHz
39dBi@ ANTL6.875~7.125 GHz
1.85 dBi@ ANT2_2.4 GHz
3.4 dBi@ ANT2_5.15~5.895 GHz
3.95 dBi@ ANT2_5.925~6.425 GHz
3.91dBi@ ANT2_6.425~6.525 GHz
4.18 dBi@ ANT2_6.525~6.875 GHz
4.01 dBi@ ANT2_6.875~7.125 GHz
© Cooler Master Technology Inc. All rights reserved.| COOLERMASTER.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>