kramer ACC3-12-SP Audio Visual Signal Management User Guide

kramer ACC3-12-SP Audio Visual Signal Management

Product Information

Specifications:

• Model: ACC3-12-SP
• Type: 1:2 CAT Cable Splitter
• Ports:
  • CAT A+B RJ-45 Port
  • CAT A RJ-45 Port
  • CAT B RJ-45 Port

Product Usage Instructions

Step 1: Check what’s in the box

Make sure you have the following items:

• ACC3-12-SP
• 1:2 CAT Cable Splitter
• Quick start guide
• Bracket set
• 4 Rubber feet

Step 2: Get to know your ACC3-12-SP

The ACC3-12-SP has the following features:

1. CAT A+B RJ-45 Port: Connect this port to a compatible CAT transmitter, such as an SWT3-41-U-T, to send combined signals over the A+B port.
2. CAT A RJ-45 Port: Connect this port to a compatible CAT receiver, such as an EXT3-UE-R or EXT3-U-R.
3. CAT B RJ-45 Port: Connect this port to a compatible CAT receiver, such as an EXT3-UE-R or EXT3-U-R.

Step 3: Mount ACC3-12-SP

You can install the ACC3-12-SP using one of the following methods:

• Refer to the full user manual for detailed mounting instructions.

Step 4: Connect inputs and outputs

Before connecting any devices to your ACC3-12-SP, ensure that the power is switched OFF on each device.

FAQ

Q: Where can I download the full user manual and check for firmware upgrades?

A: You can download the latest user manual and check for firmware upgrades from the official Kramer website at www.kramerav.com/downloads/ACC3-12-SP.

Scan for full manual

This guide helps you install and use your ACC3-12-SP for the first time.
Go to www.kramerav.com/downloads/ACC3-12-SP to download the latest user manual and check if firmware upgrades are available.

Step 1: Check what’s in the box

• ACC3-12-SP 1:2 CAT Cable Splitter
• 1 Bracket set
• 4 Rubber feet
• 1 Quick start guide

Step 2: Get to know your ACC3-12-SP

SWT3-41-U-T ) to send combined signals over the A+B port.
2| CAT A RJ-45 Port| Connect to a compatible CAT receiver (for example an EXT3-UE-R , EXT3-U-R ).
3| CAT B RJ-45 Port| Connect to a compatible CAT receiver (for example an EXT3-UE-R , EXT3-U-R ).

Step 3: Mount ACC3-12-SP

Install ACC3-12-SP using one of the following methods:

• Attach the rubber feet and place the unit on a flat surface.

• Fasten a bracket (included) on each side of the unit and attach it to a flat surface (see www.kramerav.com/downloads/ACC3-12-SP).

• Mount the unit in a rack using the recommended rack adapter (see www.kramerav.com/product/ACC3-12-SP).

• Ensure that the environment (e.g., maximum ambient temperature & air flow) is compatible for the device.

• Avoid uneven mechanical loading.

• Appropriate consideration of equipment nameplate ratings should be used for avoiding overloading of the circuits.

• Reliable earthing of rack-mounted equipment should be maintained.

Step 4: Connect inputs and outputs

Always switch OFF the power on each device before connecting it to your ACC3-12-SP.

kramerav.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>