WAIZOWL OGM CLOUD Wireless Gaming Mouse Instruction Manual

June 15, 2024
WAIZOWL

WAIZOWL OGM CLOUD Wireless Gaming Mouse

OVERVIEW

WAIZOWL-OGM-CLOUD-Wireless-Gaming-Mouse-FIG-1

  1. Left Click L
  2. Right Click R
  3. Middle key M
  4. Front side key
  5. Back side key
  6. PR/MODE
  7. DPI/POWER
  8. Type-C port

Product specification

WAIZOWL-OGM-CLOUD-Wireless-Gaming-Mouse-FIG-2

About Product Features

On/off
Hold down the DPI/POWER key for 2S

Charge state

  • Low battery Alert
    • DPI/POWER key red breath
  • Charging status
    • DPI/POWER key green breathing
  • Full charge
    • The DPI/POWER button is steady green

DPI switching
Click the DPI key to switch successively, and the DPI indicator is steady on. They are 400 (red) -800 (green) – 1600 (blue) -3200 (purple) -6400 (cyan)

Rate of return adjustment
In wired /2.4G wireless mode, click the PR/MOD key to switch successively, and the PR key light indication gear is 125 (red) – 250 (green) – 500 (blue) – 1000 (purple) -2000 (cyan) -4000 (yellow) respectively.

Note: 2000 (blue) / 4000 (yellow) is in 4K receiver mode

Receiver switching
Hold down the L/R/ front key for 3S to switch. If the PR/MODE indicator blinks green and is steady green, the connection is successful.

Note: The mouse can separately remember a 1K/4K receiver, two receivers at the same time in the working state of the mouseConnect the 4K receiver at boot priority.

Mode switching
Hold down the PR/MODE key

4G MODE: The PR/MODE key is green for 2 seconds Bluetooth MODE: PR/MODE button on the blue light 2S

2.4G wireless mode
When the device is powered on, insert the mouse transmitter into the USB port of the device, and you can use it.

Note: The first connection takes a few seconds to ten seconds

Bluetooth mode
When the device is powered on, hold down the PR/MODE key for 2S, and find the device “OGM 05” from the device to connect.

Wired mode
Connect the Type-C charging cable in the attachment to the mouse interface, and connect the computer to realize charging and normal use.

2.4G wireless mode repair
After starting up, long press the L/M/R key for 3S at the same time. You can pair it with the transmitter again. The PR/MODE key indicator blinks green, and the green indicator is steady on, indicating a successful pairing.

Bluetooth mode repair
Press and hold L/M/R for 3S to enter the search state. The PR/MODE indicator blinks blue, and the blue indicator is steady on, indicating a successful pairing.

Drive installation

Please go to WAIZOWL’s official website to download the driver installation package. The website is http://waizowl.com

The data in the product introduction is from WAIZOWL Laboratory, due to the use of different environments and equipment, there will be some differences, for reference only.

  • Users who have quality problems within 7 days of purchasing WAIZOWI products and cannot follow the use manual on the information card inside the package can choose:

    • Go to the flagship store where you purchased the product and apply for a refund
    • Go to the flagship store where you bought the product and replace it with the same model
    • Go to WAIZOWL Flagship store for repair or replacement
  • Users who purchase WAIZOWL products and have quality problems within 15 days and cannot follow the use manual on the information card inside the package can choose: Go to the flagship store where you bought the product and replace it with the same
    mode

  • Users who have purchased WAIZOWL products for more than 15 days but still have quality problems within the shelf life and cannot solve them according to the use manual on the information card inside the package can choose: Go to WAIZOWL flagship store for repair or replacement The processing process is as follows: fill in the user information registration form under the guidance of our staff, send it to the address provided by the staff, and wait for our engineers to test, repair or replace the product for you

  • Limited warranty statement WAIZOWL Company shall provide three-package service for all hardware products in its product packaging, subject to the three-package conditions of WAIZOWL Company. This service is limited to products with quality problems and does not include compensation for any direct or indirect losses caused by the loss of interests of buyers and other unexpected circumstances

  • WAIZOWL does not provide a three-pack service for WAIZOWL products under one of the following conditions

    • Cannot produce valid three package voucher and valid original purchase invoice or receipt
    • The product is beyond the three warranty period stipulated by WAIZOWL Company
    • Failure and damage caused by not using, maintaining or keeping the computer per the product instruction manual or the computer working environment specified in the instruction manual; And failure or damage caused by installation, repair, alteration or removal (screw hole protection tag broken) by repairmen not authorized by WAIZOWL The contents of this card shall not be altered without authorization, and please keep the product packaging box to protect your legitimate rights and interests.

FCC Certification

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/ TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals