MTI 94A Designer Collection Tubs Instruction Manual
- June 15, 2024
- MTI
Table of Contents
MTI 94A Designer Collection Tubs Instruction Manual
See the Installation & Operation Manual for more details.
MTI’s Customer Service: Monday-Friday 8am-6pm EST
800-783-8827 or
service@mtibaths.com
- Options and accessories may be packaged inside the tub crate. Always check packaging before discarding.
- All product measurements are +1/2”.
- Specifications and configurations are subject to change without notice.
- Measurements herein supersede all others published prior to publication date below.
IMPORTANT ORDERING & INSTALLATION INFORMATION
-
Before ordering or installing, please consider future access to equipment.
-
Unless ordering Sculpted Finish on 4 sides, please include a diagram specifying which sides will need to be finished, along with location of optional tile flange(s).
-
Overflow is factory installed for provided toe tap drain.
-
When ordering an air bath, the air blower must be remote mounted.
-
Microbubbles system components must be installed on a non-Sculpted Finish side.
Components will extend beyond the perimeter of the tub. Call MTI for specific details regarding the desired installation before placing the order. -
Radiance placed on floor locations will affect placement of air jets.
-
Hydrotherapy equipment may ship loose for remote installation. See package content on the following page for details.
-
Faucet valves cannot be installed on this tub model.
-
All tubs are compliant with ASTM C 1028-07 coefficient of friction. DoloMatte meets ANSI A137.1/A326.3 coefficient of friction and AS HB198:2014 slip tests.
For more information on options and accessories go to Acrylic Tub Options on mtibaths.com
CSA # MTDS-94A
CSA # MTDS-94D
©2023 by MTI Baths, Inc. Modification Rights Reserved
Rev. 02 07 2023
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>