EDWARDS CO EC201 Oscar Carry Cot Stroller User Guide
- June 4, 2024
- EDWARDS CO
Table of Contents
- EDWARDS CO EC201 Oscar Carry Cot Stroller
- Warnings
- What’s in the box
- Carry Cot components
- Attaching the sunshade
- Removing the canopy fabric
- Attaching the Carry Cot to the stroller frame
- Removing the Carry Cot from the stroller frame
- How to care for and maintain your Carry Cot
- Warranty
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
EDWARDS CO EC201 Oscar Carry Cot Stroller
IMPORTANT
- Keep these instructions for future reference.
- Always follow the manufacturer’s instructions.
- Read all instructions carefully before assembly and use of this Carry Cot.
- The correct use and maintenance of this product is essential.
Suitable for children 0 to 9kg
Independently safety tested for compliance with the European safety standard
EN1466:2014
Warnings
Maximum limits
The maximum weight of the child using this Carry Cot/bassinet attachment is
9kg.
This product is only suitable for a child who cannot sit up unaided.
Approved locations of use
This Carry Cot should only be clicked securely into approved Edwards & Co
strollers or an approved Edwards & Co Carry Cot Stand.
This Carry Cot is only suitable for use with Edwards & Co Oscar Mx and Olive
strollers.
Only use this Carry Cot on a firm, horizontal, level and dry surface.
When using inside, always have the Carry Cot canopy open, the sunshade and
apron off, with underneath vent holes open.
Safe use of the Carry Cot around children
Do not let other children play unattended near the Carry Cot.
Make sure children are clear of any moving parts when adjusting the Carry Cot
otherwise they may be injured.
This Carry Cot is suitable for one child only. Do not carry extra children or
bags in the Carry Cot.
Safe use & care of the Carry Cot
- Before carrying or lifting the Carry Cot, ensure the handle is in the upright position for use.
- The head of the child in the Carry Cot should never be lower than the body of the child.
- When installing the Carry Cot in an approved Edwards & Co stroller, ensure the stroller’s parking brake is engaged at all times.
- Do not place heavy weights on the Carry Cot handle.
- Do not use if any part of the Carry Cot is broken, torn or missing.
- Ensure the Carry Cot mattress is installed flat without any curls at the edges.
- Never add another mattress on top of the mattress provided by Edwards & Co with the Carry Cot.
- Only use replacement parts supplied or approved by Edwards & Co.
- Do not place any toys or obstructions in the Carry Cot.
- The handles and the bottom of the Carry Cot should be inspected regularly for signs of damage and wear.
Keeping the Carry Cot away from fire and extreme heat
Do not place or store the Carry Cot near an open fire or other source of high
heat. Examples are a roof space, or beside shed walls that can get hot.
What’s in the box
Use + Care Guide (this instruction manual)
Carry Cot components
Assembling the Carry Cot
- Remove the mattress and unzip the lining from the inner wall of the Carry Cot.
- Locate the two black metal bars on top of the wooden base inside the Carry Cot.
- Pull the strap attached to one bar and secure the bar in its housing attached to the wooden base. Repeat this with the second bar in the opposite direction.
- The Carry Cot sides should now be rigid.
- Zip the lining back into place and place the mattress inside the Carry Cot ensuring it is flat and snug.
- Locate the canopy/handle adjustment button on each of the canopy hinges. Raise the canopy by pressing the buttons simultaneously and lift the canopy upwards.
- Place the apron on the Carry Cot.
- To secure the apron, locate the Velcro underneath the corner of the canopy fabric and attach the matching Velcro on the apron.
Collapsing the Carry Cot
- If necessary, remove the sunshade and apron.
- Fold the canopy down to a flat position.
- Remove the mattress and unzip and remove the lining from inside the Carry Cot.
- Locate the two black metal bars on top of the wooden base inside the Carry Cot.
- Pull the strap attached to one bar to release it from its housing. Repeat this with the second bar.
- The Carry Cot sides can now be collapsed.
Attaching the sunshade
Note: To connect the sunshade, ensure the Carry Cot’s canopy is fully extended. The sunshade can be easily stowed above the canopy when not in use, or when removing baby.
- Locate the start of the zip on the sunshade. Locate the zip connector inside the bottom left side of the Carry Cot’s extended canopy (don’t confuse this zip with the zip to remove the canopy fabric). Connect the zip at this point.
- Zip the sunshade to the canopy.
- Stretch the sunshade over the length of the Carry Cot.
- Secure the sunshade by extending it over the end of the Carry Cot or over the handlebar.
Removing the canopy fabric
Note: The canopy may need to be removed for the purpose of cleaning. To remove the canopy fabric, ensure the Carry Cot’s canopy is fully extended.
- Locate the zips connecting the canopy fabric on each inner side of the Carry Cot’s extended canopy (don’t confuse the zip on the left hand side with the zip for the sunshade).
- Unzip each side.
- Remove canopy fabric.
Attaching the Carry Cot to the stroller frame
Important: The Edwards & Co Carry Cot can only be used with approved
Edwards & Co strollers. Do not use with other brand strollers.
WARNING: Do not use the Carry Cot when baby can sit up unaided or when
their weight exceeds 9kg, whichever is sooner.
- Insert the Carry Cot’s connectors into the connection points on the stroller frame. Pull the Carry Cot upwards to check it is secure.
You will hear a click when the Carry Cot connects correctly.
Recommendation:
Install the Carry Cot in the reverse position (with your baby looking at you).
Removing the Carry Cot from the stroller frame
-
Locate the two Carry Cot release buttons on the stroller frame, just below the Carry Cot’s connection points.
-
Push in one release button until it stays in place.
-
Push in the release button on the other side until it stays in place.
Note : The buttons do not need to be pressed simultaneously. -
Lift the Carry Cot straight up.
Note: Do not lift the Carry Cot on an angle.
How to care for and maintain your Carry Cot
Store your Carry Cot and accessories carefully
Store inside in a well-ventilated, dry area.
Do not store in a damp environment that is not well insulated (such as an
unfinished basement or outdoor shed).
Store when dry, not damp or wet.
Store away from direct sunlight. Direct sunlight could cause fabric fading or
damage.
Do not place heavy objects on top of your Carry Cot or accessories.
NEVER allow your Carry Cot to come into contact with corrosive
substances. Examples are battery acid or petroleum products. Corrosion is not
covered under our warranty – see the Warranty in this Instruction Manual.
Clean your Carry Cot carefully
Use a damp cloth to clean the canopy and outer material. To dampen a cloth,
dip the cloth in a small amount of mild detergent diluted in water (such as
laundry liquid).
-
NEVER fully soak the cloth in water.
-
NEVER get the mattress inner foam wet. If this gets wet, replace the mattress with an approved Edwards & Co mattress only.
To clean the mattress lining or Carry Cot lining, we recommend a warm wash (30 degrees) in a normal wash (for front loaders) or gentle wash (for top loaders). -
NEVER clean any part of the Carry Cot with abrasive, ammonia-based, bleach-based or spirit-based cleaners.
See care labels for specific instructions regarding machine washing.
Dry your Carry Cot carefully
Dry the Carry Cot thoroughly before storing it.
NEVER tumble dry any part of the Carry Cot.
NEVER wring any Carry Cot fabrics.
Check regularly for wear and tear
Check regularly for wear and tear on all Carry Cot parts.
Inspect your Carry Cot regularly
Get your Carry Cot inspected regularly to maintain it. Regular inspection
ensures the locking devices are working correctly and essential components are
secure.
Use your Carry Cot in sunlight for short periods
Always store your Carry Cot in a shaded area. Only use your Carry Cot in
direct sunlight for short periods. This will help reduce fabric fading and
damage.
Read our Servicing Guide before using the Carry Cot on the beach or near
salt water
If you live within 3kms of the sea, take extra care to park/store your Carry
Cot indoors and away from wind. Salt water carries in strong winds and is
extremely corrosive.
Do not use your Carry Cot on the beach. Salt and moisture can damage moving
parts. Even salty atmospheric conditions can affect the Carry Cot’s
mechanisms.
Warranty
All Edwards & Co products are guaranteed for two years from the date of
shipping against defects in material and workmanship.
If we determine that the product has a manufacturing fault, we will repair or
replace it free of charge to you. The decision to repair or replace is solely
at the discretion of Edwards & Co Proof of purchase must be provided. The
warranty is “return to base” and not a free in-home service. This means the
customer is responsible for any inwards freight charge to return the product
to an Edwards & Co representative for warranty or service.
Our warranty excludes claims resulting from misuse, abnormal use, overloading, general wear and tear, child outgrowing the product, not following instructions, transportation damage (including airline or freight damage), poorly maintained product, dropped goods, negligence, second-hand product, modified product, colour fading, over inflation, mould, damage to handle foam in use or fabric cuts and tears. Our warranty also does not cover tyre punctures or corrosion to frames or fasteners as a result of atmospheric or environmental conditions. Any replacement will not give the right for the warranty period to be extended. Edwards & Co does not cover warranty if the product has been purchased second-hand or from an unauthorized reseller. For the complete terms and conditions of our warranty, please visit our website — edwardsandco.nz/pages/warranty
Edwards & Co New Zealand
Unit 5
30 Foundry Road
Silverdale 0932
NEW ZEALAND
NZ: (09) 869 8950
hello@edwardsandcobaby.com
Edwards & Co Australia
C/O – G&S Logistics Unit 1, 96-112 Gow Street Padstow NSW 2211 AUSTRALIA
AU: (02) 9066 6702
References
- Edwards & Co 2 Year Product Warranties
- Baby Prams and Nursery Furniture NZ | Edwards & Co New Zealand
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>