TeaRoo DSI292 Coffee Mug Warmer User Manual
- June 15, 2024
- TeaRoo
Table of Contents
TeaRoo DSI292 Coffee Mug Warmer
Before operating the coffee mug warmer, please read these instructions completely and save carefully.
Getting to know your coffee mug
- Wipe the water at the bottom of the cup before use, do not immerse the unit, cord, or plug in water or other liquid.
- Simply plug the cord, place cup in the middle of the heating plate, and press the power button to turn it on.
- Temperature setting: Touching to . choose high level(176″F-185″F), middle level(lSO”F-170 F) and low leve1(130″F-150″F).
- Timer setting: Touching+ – button to set auto-off time from 1-9H, it will turn off automatically after the time you set. The default timing is 4 hours.
- Cup model setting: Touching” “to choose cup models ceramic, metal, and glass. Each model has high, middle, low different temperatures. You can choose one of the models based on the cups you use.
me
SETTING
| GLASS| CERAMIC| METAL
---|---|---|---
High setting| 18D’F| 176″F| 185’F
Mid setting| 165 F| 150 F| 170 F
Low setting| 145’F| 130’F| 150’F
6. Cup memory:
If you choose the “ceramic” model the next time you turn on the unit it will
remember your last choice by default. The same method for glass and metal.
-
Gravity sensing function:
This coffee mug warmer comes with a microgravity button that heats up in working mode when the coffee mug warmer feels enough weight. When you remove the mug, the coffee warmer goes into standby mode for 10 minutes and display- on the screen(the plate stays warm between sips). If you put the cup back within 10 minutes, it will continue to work as your setting. Otherwise, it will automatically shut down after 10 minutes. -
Gravity switch cancel
Considering some user’s cups may not reach 300g/11oz or some different habit( some may not like gravity function), there is “I / o· switch to control the gravity sensor. You can cancel the gravity sensor by sliding the toggle to “O” position. No matter whether there is cup on unit, it will work until the time is up.
Note: The temperature we mentioned is that we tested in the lab at room temperature, it will surely vary depending on different jugs or ambient temperatures.
Specifications
IMPORTANT SAFEGUARDS
- Read all instructions carefully.
- Do not use the appliances if there is any broken or cracked surface.
- Do not touch the hot surface at any time.
- To protect against electrical shock do not immerse the cord, plugs, or (state-specific part or parts in question) in water or other liquid.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from the outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
- Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. Return the appliance to the nearest authorized service facility for examination. repair.or adjustment.
- The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
- Do not use outdoors (this item may be omitted if the product is specifically intended for outdoor use).
- Do not lat cord hang over the edge of the table or counter,or touch hot surfaces.
- Do not place on or near a hot gas or electric burner.or in a heated oven.
- Please turn off the appliances and unplug to cool down before moving
- Always attach plug to the appliance first, then plug the cord into the wall outlet. To disconnect, turn any control to “off”, then remove the plug from the wall outlet.
- Do not use the appliance for other than intended use.
- This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock. this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug, If it still does not fit. contact a qualified electrician, Do not attempt to modify the plug in any way.
- Store appliances indoors when not in use – out of the reach of children.
- A fire may occur if appliances are covered or touching flammable material. including curtains, and draperies. books. and the like, when in operation.
- Do not operate unattended.
- Sealed beverage cans should be opened before heating.
- The warming effect varies from material of cup, it works best with flat-bottomed stainless steel mugs or flat-bottomed ceramic mugs or flat-bottomed glass. Covering the lid can help keep the heat. 21.Please do not use plastic cups, Insulated tumble cup, thick-bottom cups, and paper cups.
- Please cut off the power immediately and cool down then wipe up the liquid if a beverage is poured onto the healing plate.
- Never allow your children or pet to play with it as a toy.
- Do not disassemble it by yourself.
- This appliance is spill-resistant but not waterproof. Unplug from the outlet when not in use and. Allow to cool before putting on or taking off parts, and before cleaning.
- Do not use an extension cord with this appliance.
- CAUTION HOT SURFACE! Please do not touch during or immediately after use and keep out of reach of children.
- Please turn off or unplug after use.
- Never put this appliance on any leather tables valuable types of furniture or other vulnerable tablas when working
- Do not use cups or mugs with a diameter over the heating plate’s size.
- SAVE THESE INSTRUCTIONS
Cleaning and Maintenance
Unplug the coffee warmer and allow the heating surface to completely cool before cleaning.
- Do not clean this product with a water spray or the like.
- Use a damp cloth to wipe down the surface of the coffee warmer. Dry immediately with a clean, dry cloth.
- Do not immerse the coffee warmer in water or liquids.
Common Troubleshooting
- Unable to turn on: Please try to unplug, wait for a while, and then replug, and turn on the power button.
- Unable to heat and only displays – – :
- Please check the cup is on the warmer.
- There may be little water in the cup which does not meet the gravity requirement, please add enough water or coffee.
- Please check whether the warmer is on any soft surface such as a mouse pad, clothes, books, or tile likes which may block the gravity switch and can not heat
- Please make sure the table surface is flat without any protrusion or recesses which may block gravity switch.
- Please remove the four EVA feet under the bottom and try again.
- Setting changes automatically or hard to touch: Please check if there is any water or liquid on or around the button, please clean it and try again.
- If these tips still can not solve your problem. please do not hesitate to contact the seller for help.
Q&A
- How long does it take to heat the drink? This product is mainly used for keeping drinks warm, rather than heating beverages quickly, so it usually takes about half an hour to an hour or even longer to heat cold drinks.
- Do I need to wait 4 hours to automatically turn off the coffee warmer? No, you can always turn it off manually.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>