ENHULK DS175 Blower Sweeper User Guide

: June 15, 2024
: ENHULK

Table of Contents

ENHULK DS175 Blower Sweeper
Safety Instruction
Warning For Charger
Product Description
Symbols
Technical Data
Assembly
Maintenance and transportation
Operation
Starting Operation
Cleaning And Maintenance
Transportation
Troubleshooting
Guarantee
Documents / Resources

ENHULK DS175 Blower Sweeper

Specifications

Product Name: 20V Blower/Sweeper DS175
Manufacturer: SYVIO TECHNOLOGY.CO.LIMITED
Address: ROOM A,8/F,wok Cheung Building,635-637 Shanghai Street,Mong kok,Hong Kong
Country of Origin: China
Contact Number : 1 877-750-3787 (Mon.- Fri.9 to 5 PST)
Email: service@enhulktools.com
Website: http://www.enhulktools.com
Social Media:
Instagram: @enhulkofficial
Twitter: @enhulkofficial
Facebook: @Enhulkofficial

Safety Instruction

Safety Instructions

General Power Tool Safety Warnings

WARNING Read all safety warnings, instructions, illustrations and specifications, illustrations and speciﬁcations provided with this power tool. Failure to follow all instructions listed below may result in electric shock, ﬁre and/or serious injury.
Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains operated (corded) power tool or battery-operated (cordless) power tool.

Work area safety

Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of ﬂammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical Safety

Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodiﬁed plugs and matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded sur- faces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock..
When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is un- avoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

Personal Safety

Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the inﬂuence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious
personal injury.
Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, nonskid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your ﬁnger on the switch or energising power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust related hazards.
Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

Power Tool Use And Care

Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it on and o”. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

Battery Tool Use And Care

Recharge only with the charger speciﬁed by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of ﬁre when used with another battery pack.
Use power tools only with speciﬁcally designated battery packs. Use of any other battery packs may create a risk of injury and ﬁre.
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a ﬁre.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, ﬂush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
Do not use a battery pack or tool that is damaged or modiﬁed. Damaged or modiﬁed batteries may exhibit unpredictable behavior resulting in ﬁre, explosion or risk of injury.
Do not expose a battery pack or tool to ﬁre or excessive temperature. Exposure to ﬁre or temperature above 130°C may cause explosion. Follow all charging instructions and do not charge the battery pack or tool outside the temperature range speciﬁed in the instructions. Charging improperly or at temperatures outside the speciﬁed range may damage the battery and increase the risk of ﬁre.

Service

Have your power tool serviced by a qualiﬁed repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers

Safety Instructions For Blower

Do not blow any harmful substances, e.g. beech or oak wood dust, rock dust or asbestos. These substances are classiﬁed as carcinogenic.
Do not blow any liquids. The penetration of liquids increases the risk of an electric shock. Pay attention that bystanders are not injured by foreign objects that are blown off by the product. Keep your ﬁngers away from the openings of the power tool during operation.
Only operate the blower with a nozzle attached. The rotating fan can injure you.
Ensure that the workplace is well ventilated. Do not let children use the power tool unsupervised. Children are at risk of injuring themselves this way. Wear additional personal protective equipment such as protective glasses and a protective mask. Wearing personal protection equipment appropriate to the conditions reduces your exposure to hazardous substances.
In case of damage and improper use of the battery, vapours may be emitted. The battery can set alight or explode. Ensure the area is well ventilated and seek medical attention should you experience any adverse effects. The vapors may irritate the respiratory system.
Do not open the battery. There is a risk of short circuiting.
The battery can be damaged by pointed objects such as nails or screwdrivers or by force applied externally. An internal short circuit may occur, causing the battery to burn, smoke, explode or overheat.
Only use the battery with products from the manufacturer. This is the only way in which you can protect the battery against dangerous overload.

Protect the battery against heat, e.g. against continuous intense sunlight, ﬁre, dirt, water and moisture. There is a risk of explosion and short circuiting.

Warning For Charger

WARNING

Read all warnings and instructions.
Failure to follow the warnings and instructions can cause electric shock, ﬁre and/or serious injury. Save all warnings and instructions for future reference.
The charger must not be used for non-recharge- able, ordinary batteries.
Adequate ventilation is required.
The information on current and voltage on the battery pack must comply with those of the charger. Do not expose the charger to water splashes and rain. Do not throw exhausted or damaged batteries into water or ﬁre. Environmental guidelines must be followed.
A defective or not chargeable battery must be treated as special waste / hazardous waste. Put it in a special collection point. Do not throw it in the normal household waste neither into water or ﬁre. Place the charger far from any heat source.
To reduce the risk of electric shock, pull the plug instead of the power cord out from the socket, if you want to disconnect the charger from the mains. Do not disassemble the charger. Bring it to an authorized repair service, if service or repair is required. Improper installation can result in electrical shock, death and ﬁre.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children.
Do not leave the equipment unattended while it is operating, to avoid the risk of ﬁre, burns and electric shocks.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualiﬁed persons in order to avoid a hazard.

Product Description

And Speciﬁcations

Read all the safety and general instructions. Failure to observe the safety and general instructions may result in electric shock, ﬁre and/or serious injury.
Please observe the illustrations at the beginning of this operating manual.

Intended Use

The power tool is intended for blowing away non-harmful substances (e.g. sawing debris, metal chips, stone dust, etc.) produced during sawing, drilling or grinding. Drill holes can also be blown out with the appropriate accessories. The power tool is not suitable for blowing hot, ﬂammable or explosive materials.

Symbols

ENHULK-DS175p-Blower-Sweeper-04 Product Description And Speciﬁcations

Product Features
Diagram of the power tool on the graphics page.

Blower Tube
Tube-Release Button
Air inlet
Battery
Handle
Speed adjust switch

Technical Data

Assembly

Battery Charging

Use only the chargers listed in the technical data. Only these chargers are matched to the lithium -ion battery of your power tool.
The battery is supplied partially charged. To ensure full battery capacity, fully charge the battery in the charger before using your tool for the ﬁrst time.
The lithium-ion battery can be charged at any time without reducing its service life. Interrupt-ing the charging process does not damage the battery.
The lithium-ion battery is protected against deep discharge by Electronic Cell Protection (ECP). A protective circuit switches the power tool off when the battery is drained.
Do not continue to push the speed adjust switch after the tool has been automatically power off.
Removing The Battery
The battery is equipped with two locking levels to prevent the battery from falling out if the battery release button is pressed unintentionally. As long as the battery is inserted in the power tool, it is held in position by means of a Spring.

Maintenance and transportation

To remove the battery (4), press the release button and pull the battery upwards and out of the power tool. Do not use force to do this. Follow the instructions on correct disposal. Fitting the blower accessories. Remove the battery before cleaning or performing maintenance work on the power tool, before making tool adjustments, changing accessories or storing the power tool. This safety measure prevents the power tool from being started accidentally.

Operation

After fully-charged the battery pack, carefully ﬁt it into the blower with a “click”. Make sure the bat-tery pack is tight enough ﬁtted with the blower.

Starting Operation

Switching On/Off

To switch on the blower/sweeper ,Push speed adjust switch(6) to position 1 for eco blower force. Push speed adjust switch(6) to position 2 for powerful blower force.
To switch off the blower/sweeper, push the speed adjust switch (6) to position off. Working Advice
Never blow dirt in the direction of bystanders. Always hold the power tool approx. 3 cm above the ground when working. Do not blow hot, ﬂammable or explosive material.
The blower is intended for residential use only. Use the blower outdoors to move debris from hard surfaces. This blower is not designed to clear leaves from large grassy areas, or move wet, heavy debris.

Cleaning And Maintenance

WARNINGS
All maintenance should be carried out by a qualiﬁed person, do not try to repair any defect. When servicing, use only identical replacement parts. Use of any other part could create a hazard or cause product damage.

Cleaning

Before cleaning or performing any maintenance, remove the battery from the blower/sweeper, use clean cloths to remove dirty, dust, oil, grease, etc. Always use only a soft, dry cloth to clean the plastic parts, never use detergent or alcohol. Always wear safety googles when cleaning tools with compressed air.

Storage

Switch the product off and remove the battery packs.
Clean the product and re-pack to original package.
Store the product and its accessories in a dark, dry, frost-free, well-ventilated place..
Always store the product in a place that is inaccessible to children. The ideal storage temperature is between 10°C and 30°C.
We recommend using the original package for storage or covering the product with a suitable cloth or enclosure to protect it against dust.

Transportation

Switch the product off and remove the battery packs.
Re-pack to original package.
Protect the product from any heavy impact or strong vibrations which may occur during transportation in vehicles.
Secure the product to prevent it from slipping or falling over.

Troubleshooting

ENHULK-DS175p-Blower-Sweeper-013

Guarantee

Guarantee
Dear Customer,

This equipment is provided with a 2-year guarantee from the date of purchase. In case of defects, you have statutory rights against the seller of the product. These statutory rights are not restricted by our guarantee presented below. Terms of Guarantee the term of the guarantee begins on the date of purchase, please retain the original receipt and it’s required as proof of purchase. If a material or manufacturing defect occurs within 2-year of the date of the purchasing, we will repair or replace the product for you free of charge. This guarantee requires the defective equipment and proof of purchase to be presented within the 2-year period with a brief written description of what constitutes the defect and when it occurred. If the defect is covered by our guarantee, you will receive either the repaired product or a new product. No new guarantee period begins on repair or replacement of the product.

Guarantee Period And Statutory
Claims For Defects
The guarantee period is not extended by the guarantee service. This also applies for replaced or repaired parts. Any damages and defects already present at the time of purchase must be reported immediately after unpacking.

SYVIO TECHNOLOGY.CO.LIMITED
ROOM A,8/F,wok Cheung Building,635-637 Shanghai Street,Mong kok,Hong Kong Made in China