Shelly 0-10V Wi-Fi Dimmer Bluetooth Instruction Manual
- June 15, 2024
- Shelly
Table of Contents
Shelly 0-10V Wi-Fi Dimmer Bluetooth
Product Information
Specifications:
- Model: Shelly Plus 0-10V Dimmer
- Power Supply: 110-240 VAC
- Maximum Current: 2 A
- Dimming Control: 0-10 V
Description:
The Shelly Plus 0-10V Dimmer is an intelligent dimming controller designed to
provide smooth and precise dimming control for compatible lighting systems. It
is equipped with a 0-10 V dimming feature, allowing you to adjust the
brightness of your lights according to your preferences. The device is
designed to be easy to install and operate, providing a convenient solution
for creating the desired lighting atmosphere in your space.
Product Usage Instructions
Installation:
- Ensure that the power supply is disconnected before starting the installation process.
- Identify the appropriate location for installing the Shelly Plus 0-10V Dimmer. Ensure that it is away from moisture or water sources.
- Connect the device to the power supply using the provided cables. Make sure to follow the correct wiring connections:
- Connect the V+ terminal of the dimmer to the positive (+) terminal of the power supply.
- Connect the VDim+ terminal of the dimmer to the positive (+) terminal of the lighting system.
- Connect the Dim- terminal of the dimmer to the negative (-) terminal of the lighting system.
- Connect the L terminal of the dimmer to the live (L) wire of the power supply.
- Connect the N terminal of the dimmer to the neutral (N) wire of the power supply.
- Securely fasten all the connections using appropriate tools.
- Once the installation is complete, ensure that all connections are properly insulated and protected.
- Reconnect the power supply.
Operation:
The Shelly Plus 0-10V Dimmer can be operated using compatible control systems
or manually. Follow the instructions below for manual operation:
Manual Dimming:
- Ensure that the power supply is connected and the device is properly installed.
- To increase brightness, rotate the dimming control knob clockwise.
- To decrease brightness, rotate the dimming control knob counterclockwise.
- Adjust the dimming control knob until the desired brightness level is achieved.
Using External Control Systems:
The Shelly Plus 0-10V Dimmer can also be integrated with external control
systems for automated dimming. Please refer to the instructions provided by
the control system manufacturer for detailed integration steps.
Frequently Asked Questions (FAQ):
-
Q: Can I install the Shelly Plus 0-10V Dimmer in a wet environment?
A: No, it is not recommended to install the device where it can get wet. Ensure that the dimmer is installed in a dry location to avoid damage or electrical hazards. -
Q: Can I repair the Shelly Plus 0-10V Dimmer myself if it gets damaged?
A: No, it is not recommended to attempt to service or repair the device yourself. If the device shows signs of damage, please contact a qualified professional or the manufacturer for assistance.
Read before use
This document contains important technical and safety information about the device, its safe use, and installation.
CAUTION!
Before beginning the installation, please read carefully and entirely this
guide carefully and any other documents accompanying the device. Failure to
follow the installation procedures could lead to malfunction, danger to your
health and life, violation of law or refusal of legal and/or commercial
guarantee (if any). Shelly Europe Ltd. is not responsible for any loss or
damage in case of incorrect installation or improper operation of this device
due to failure to follow the user and safety instructions in this guide.
Product Introduction
Shelly® is a line of innovative microprocessor-managed devices, which allow remote control of electric circuits through a mobile phone, tablet, PC, or home automation system. Shelly® devices can work standalone in a local Wi-Fi network or they can also be operated through cloud home automation services. Shelly Cloud is a service that can be accessed using either an Android or iOS mobile application or with any internet browser at https://control.shelly.cloud/. Shelly® devices can be accessed, controlled, and monitored remotely from any place where the user has internet connectivity, as long as the devices are connected to a Wi-Fi router and the Internet. Shelly® devices have an Embedded Web Interface accessible at http://192.168.33.1 when connected directly to the device access point, or at the device IP address on the local Wi-Fi network. The embedded Web Interface can be used to monitor and control the device, as well as adjust its settings.
Shelly® devices can communicate directly with other Wi-Fi devices through HTTP protocol. An API is provided by Shelly Europe Ltd. For more information, please visit https://shelly-api-docs.shelly.cloud/#shelly-family-overview. Shelly® devices are delivered with factory-installed firmware. If firmware updates are necessary to keep the devices in conformity, including security updates, Shelly Europe Ltd. will provide the updates free of charge through the device Embedded Web Interface or the Shelly mobile application, where the information about the current firmware version is available. The choice to install or not the device firmware updates is the user’s sole responsibility. Shelly Europe Ltd. shall not be liable for any lack of conformity of the device caused by the failure of the user to install the provided updates promptly.
Schematic
Legend
Device terminals:
- +: 0-10V positive output
- -: 0-10V negative output
- S1: Switch 1 input terminal
- S2: Switch 2 input terminal
- L: Live terminal
- N: Neutral terminal
Wires:
- N: Neutral wire
- L: Live (110 – 240 VAC) wire
Installation Instructions
Shelly Plus 0-10V Dimmer (the Device) is a smart 0-10V dim-ming controller.
-
ATTENTION! The Device is not intended to directly control LED lights.
It can be retrofitted into standard electrical wall boxes, behind power sockets and light switches or other places with limited space. -
CAUTION! Danger of electrocution. Mounting/installation of the Device to the power grid has to be performed with caution, by a qualified electrician.
-
CAUTION! Danger of electrocution. Every change in the connections has to be done after ensuring there is no voltage present at the Device terminals.
-
CAUTION! Do not open the device. It does not contain any parts that can be maintained by the user. For safety and licensing reasons, unauthorized change and/or modification of the device is not permitted.
-
CAUTION! Use the Device only with a power grid and appliances that comply with all applicable regulations. A short circuit in the power grid or any appliance connected to the Device may damage it.
-
CAUTION! Do not connect the Device to appliances exceeding the given max load!
-
CAUTION! Connect the Device only in the way shown in these **** instructions. Any other method could cause damage and/or injury.
-
CAUTION! Do not use the Device if it shows signs of damage! Do not attempt to service or repair the Device yourself!
-
CAUTION! Do not install the Device where it can get wet.
-
CAUTION! The Device has to be secured by a cable protection switch under EN60898-1 (tripping characteristic B or C, max. 2 A rated current, min. 6 kA interrupting rating, energy limiting class 3).
-
RECOMMENDATION: Connect the Device using solid sin-gle-core wires or stranded wires with ferrules.
-
Before starting the mounting/installation of the Device, check that the breakers are turned off and there is no voltage on their terminals. This can be done with a mains voltage tester or multimeter. When you are sure that there is no voltage, you can proceed to connect the wires.
-
Connect the Device positive output to the LED driver 0-10V positive input and the Device negative output to the LED driver 0-10V negative input as shown in Fig. 1.
-
Connect the Live wire to the Device L terminal, and the Neutral wire to the N terminal.
-
The Live wire must be protected by a circuit breaker with a rated current of less than 2 A.
-
Connect switches or buttons to the Device S1 and S2 terminals and the Live wire.
-
The Device can work in single or dual-button modes or a single-switch mode.
-
In single input mode, S2 is always detached.
-
ATTENTION! Do not use buttons or switches with built-in LED or glow lamps!
Connect the LED driver to its power supply and the LED lights under the installation instructions provided by the LED driver manufacturer.
Initial Inclusion
If you choose to use the Device with the Shelly Smart Control mobile application and cloud service, instructions on how to connect the Device to the Cloud and control it through the Shelly Smart Control app can be found in the mobile application guide. The Shelly mobile application and Shelly Cloud service are not conditions for the Device to function properly. This Device can be used standalone or with various other home automation platforms and protocols.
CAUTION!
Do not allow children to play with the buttons/switches connected to the
Device. Keep the devices for remote control of Shelly (mobile phones, tablets,
PCs) away from children.
Specifications
- Dimensions (HxWxD): 37x42x16 mm / 1.46×1.65×0.63 in
- Weight: 18 g / 0.62 oz
- Ambient temperature: -20 °C to 40 °C / -5 °F to 105 °F
- Humidity 30 % to 70 % RH
- Max. altitude 2000 m / 6562 ft
- Screw terminals max torque: 0.4 Nm / 3.54 lbin
- Conductor cross-section: 0.5 to 1.5 mm² / 20 to 16 AW
- Conductor stripped length: 5 to 6 mm / 0.20 to 0.24 in
- Power supply: 110 – 240 VAC, 50/60Hz
- Electrical consumption: < 1.2 W
- External protection: max. 2 A, tripping characteristic B or C, 6 kA interrupting rating, energy limiting class 3
- Max. control voltage: 10 V
- Max. control current: 35 mA
- PWM frequency: 500 Hz
- Internal temperature sensor: Yes
- RF band: 2400 – 2495 MHz
- Max. RF power: < 20 dBm
- Wi-Fi protocol: 802.11 b/g/n
- Wi-Fi operational range (depending on local conditions):
- up to 50 m / 160 ft outdoors
- up to 30 m / 100 ft indoors”
- Bluetooth protocol: 4.2
- Bluetooth operational range (depending on local conditions):
- up to 30 m / 100 ft outdoors
- up to 10 m / 33 ft indoors
- CPU: ESP32
- Flash: 4 MB
- Schedules: 20
- Webhooks (URL actions): 20 with 5 URLs per hook
- Scripting: Yes
- MQTT: Yes
- UDP: Yes
Declaration of conformity
Hereby, Shelly Europe Ltd. (former Allterco Robotics EOOD) declares that the radio equipment type Shelly Plus 0-10V Dimmer complies with Directive 2014/53/EU, 2014/35/EU, 2014/30/EU, 2011/65/EU. The full text of the EU Declaration of Conformity is available at the following internet address: https://shelly.link/plus_0-10v_DoC.
- Manufacturer: Shelly Europe Ltd.
- Address: 103 Cherni Vrah Blvd., 1407 Sofia, Bulgaria
- Tel.: +359 2 988 7435
- E-mail: support@shelly.cloud.
- Official website: https://www.shelly.com.
Changes in the contact information data are published by the Manufacturer on the official website. All rights to the trademark Shelly® and other intellectual rights associated with this Device belong to Shelly Europe Ltd.
