CUKTECH P23 Series Power Bank User Manual

CUKTECH P23 Series Power Bank

Product Information

CUKTECH Power Bank P Series 25000mAh 210W

Product Overview
Thanks for using the CUKTECH Power Bank P Series 25000mAh 210W. This power bank is designed with high-quality lithium-ion cells and charging & discharging chips, ensuring outstanding performance in terms of safety, efficiency, and compatibility.

Screen Introduction
The power bank’s screen provides important information about its status and features:

• Percentage of Cell Capacity: The display range is from 0% to 100%, indicating the current device’s cell capacity.
• Total Input Power: The Total Input icon and real-time total input power are displayed when the device is in the input state.< /span>
• Low Current Mode: By double-clicking the button, you can enter the low current discharge mode.
• Remaining Time while Charging and Discharging: When charging and discharging are performed simultaneously, the displayed time indicates the remaining time of charging. If the discharge power is greater than the charging power, the displayed time is shown as 99:99.
• Battery Temperature: The internal battery temperature is displayed in real-time during device operation.

Functions of Buttons
The power bank has different button functions:

• Click Button: Clicking the button will light up the screen and display the current working status.
• Single Click Button: In the bright screen state, clicking the button switches from the first level interface to the second level interface. In the bright screen state, clicking the button again switches to the Always on Display state.
• Double Click Button: Double-clicking the button enters the low current discharge mode and double-clicking again exits this mode under the bright screen state. Holding the button for 5 seconds turns off the power bank.

LED Display Effect
The LED lights on the power bank indicate its working condition:

• Charging State: The LED gradually lights up from the bottom to the button.
• Discharge State: The LED gradually lights up from the button to the bottom.
• Charging and Discharging Status at the Same Time: The LED gradually lights up from the bottom to the button.

To turn off the LED, click the button multiple times to switch to Screen K&& fashion.

Specifications

• Model: CUKTECH Power Bank P Series
• Capacity: 25000mAh
• Power Output: 210W

FAQs

• Q: How do I switch to the low current discharge mode?
  A: To enter the low current discharge mode, double-click the button. To exit this mode under the bright screen state, double-click the button again.

• Q: How do I turn off the power bank?
  A: Press and hold the button for 5 seconds to turn off the power bank.

• Q: How do I switch off the LED lights?
  A: Click the button multiple times to switch to Screen K&& mode, which turns off the LED lights.

Read this manual carefully before use, and retain it for future reference.

Product Overview

Thanks for using this product. Designed with high-quality lithium-ion cells and charging & discharging chips, this high-quality power bank demonstrates outstanding performance in safety, efficiency, and compatibility.

Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual product and functions may vary due to product enhancements.

Screen Introduction

• Percentage of cell capacity: The display range is 0% -100%, indicating the current device’s cell capacity.
• Total input power: the “Total Input” icon and real-time total input power are displayed when the device is in the input state.
• Total output power: the “Total Output” icon and real-time total output power are displayed when the device is in an output state.
• Input power: the icon of the corresponding charging port “Type-C IN” and real-time input power are displayed when the device is in the input state.
• Output power: the icon of the corresponding charging port “Type-C&USB-A OUT” and real-time output power are displayed when the device is in the output state.
• Charging remaining time: In the charging state, the displayed time is the remaining time to fully charge.
• Discharge remaining time: In the discharge state, the displayed time is the remaining time for discharging.
• Remaining time while charging and discharging: When charging and discharging are performed simultaneously, the displayed time is the remaining time of charging.
• When the discharge power is greater than the charging power, the displayed time is “99:99”
• Battery temperature: Real-time display of the internal battery temperature during device operation.

Functions of Buttons

and display the current working status.
Screen 0N| In the bright screen state, click the button to switch from the first-level interface to the second-level interface
Screen 0N| In the bright screen state, click the button to switch from the secondary interface to the Always on Display state
Any charged state| Double click button| Double-click the button to enter the low current discharge mode, and double-click again to exit the mode under the bright screen state.
Press and hold the button for 5 seconds| After the button is pressed and held for 5 seconds, the machine is turned off.

Standby state: The power bank has power, and it is neither being charged nor being discharged.

LED display effect

from the bottom to the button
Undercharging and discharging conditions, there is no operation within 30 seconds, the screen goes out, and the LED changes from bright to semi bright
Turn off the LED| Click the button multiple times to switch to Screen 0FF mode

Specifications

• Model: PZ
• Battery Type: Lithium-ion cell
• Battery Capacity (Rated/Typical): 88Wh/90Wh 18V 4.9Ah/5Ah
• Rated Capacity: 13500mAh (5V/6A)
• Input Interface: Type-C
• Output Interface: USB-A/Type-C
• Input Parameter: INI (Type-Cl) 5V=3A 9V=3A 12V=5A 15V=3A 5.5A IN2(Type-C2) 5V=70A 9V=5A 12V=5A 15V=3A 20V=5A
• Output: Parameter: 210W MAX*
  • OUTI(Type-Cl) 5V=3A 9V=5A 12V=5A 15V=5A 20V=6A 28V=5A 140W MAX
  • OUT2(Type-C2) 5V=3A 9V=70A 12V=5A 15V=3A 20V=5A 60W MAX
  • OUT3(USB-Al) 5V=3A 9V=2.23A 12V=l.67A 5-11V=5A SOW MAX
• Multi-Port: 5V=6A (OUTI 5V=2A OUT2 5V=2A OUTS 5V=2A)
  • 9V=-6A (OUTI 9V=2A OUT2 9V=2A OUTS 9V=2A)
  • 12V=6A (OUTI 12V=2A OUT2 12V=2A OUTS 12V=2A)
  • 15V=6A (OUTI 15V=70A OUT2 15V=5A)
  • 20V=9A (OUTI 20V=6A OUT2 20V=3A 180W MAX)
• Operating Temperature: 5 oc-35 oc
• Specification and Size: 159.955.155.1mm
• Conversion Efficiency of Power Bank: 75% (5V/6A)
• Charging Time: About 2 hours (charger of 110W and above, Type-C to Type-C cable inside the packaging, INI port), and about 6 hours (18W charger, Type-C to Type-C cable inside the packaging)

Note:
When the output current of the Type-C port is greater than 5A, a Type-C to Type-C charging cable inside the packaging needs to be used. This product has a large capacity, and it is recommended to use a charger with a power of 65W or above in conjunction with the charging wire inside the packaging.

The maximum output peak power is 210W (OUTI 20V=6A OUT2 20V=5A OUTS IOV=3A), subject to the actual testing method adopted by CUKTECH lab.

Product Features

• Safety: Designed with multiple protection, the product can easily cope with abnormalities such as overcharge, over-discharge, overtemperature, and short circuit, and provide reliable protection for power banks and digital devices.
• Power: Fast charging and discharging, supporting bidirectional Type-C wide voltage input and output. The maximum charging power is up to 110W, and the maximum discharge power of multiple ports is up to 210W.
• Compatibility: The built-in smart USB charging controller is compatible with mainstream mobile phones and digital devices, and supports mainstream fast charging and discharging.
• Quality: High-quality lithium-ion cells and charge & discharge chips.

Warnings

Improper use may lead to cell function failure, serious heating, and even fire and explosion. To protect you against injury and property damage, please store and use this product in strict accordance with the following requirements:

• This product, which is not a toy, must be kept out of the reach of children. To avoid accidents, no child is allowed to use or play with the product.
• To prevent electric shock or cell damage, please be sure to charge this product with a charger that meets local safety standards (such as the China 3C certification standard).
• Do not press or strike this product heavily and avoid cases that may cause severe falls or strong vibrations.
• If these conditions occur, or liquid seeps/splashes into the interior of this product, stop using immediately and handle them properly because such cases may cause cell or circuit damage or a short circuit.
• If this product experiences swelling, deformation, fluid leakage, and a significant decrease in capacity, stop using it immediately and handle it properly.
• Do not charge or discharge this product in any places that may affect its heat dissipation, such as pockets, enclosed bags, beds, sofas, and other places. Confirm that this product is not covered by clothing, pillows, bedding, or other debris during use. When devices such as mobile phones are to be charged for a long time, do not stack this product together with other devices such as mobile phones, to ensure ideal heat dissipation for them.
• Do not disassemble, squeeze, puncture, short-circuit this product, or put it into water, fire (including near stoves, heating installations, and other heat sources), or expose this product to an environment with a temperature higher than 60 oc (1400F).
• In hot weather, keep this product away from an unmanned vehicle outdoors or other places exposed to sunlight.
• To avoid cell damage or other hazards, do not disassemble the product shell without permission because this product contains a lithium-ion polymer cell.

Tips:
The illustrations about the product, accessories, and user ports in the Manual are schematic diagrams for reference only. Due to product updates and upgrades, there may be slight differences between the physical product and the schematic diagram, and the physical product shall prevail.

Precautions

• Please fully charge this product before its first use.
• To charge this product or use this product to charge other devices, please choose an appropriate charger and data cable (CUKTECH charger and data cable are recommended).
• This product should be charged in an attended manner. Cut off the power supply when you are going out or leaving for a long time.
• As long as this product is fully charged or has fully charged other devices, timely unplug the connection cable to avoid loss in a long-time connection state.
• If the product has no power indication after a button is pressed, it may be in a protected state. You can connect to an external charger to recover it.
• When this product is not in use for a long time, please keep the product with a power level in a range of about 25% – 50% and store it in a cool and dry place. To extend the cell life, do not store this product with full or no power for a long time.

FCC Warning

Please pay attention that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause undesired operation.
• This device complies with Part 18 of the FCC Rules.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

UKCA warning
Hereby, NanJing CukTech Electronics Technology Co., Ltd. declares that the radio equipment type POICT complies with Radio Equipment Regulations 2017.

The full text of the UK Declaration of Conformity is available at the following internet address: http://www.cuktech.com/global/service/support/declaration.html.

EU Declaration of Conformity

We, CukTech ELEC Co., Ltd., hereby declare that this equipment complies with the applicable Directives and European Norms, and amendments. The full text of the EU Declaration of Conformity is available at the following internet address: http://wvwd.cuktech.com/global/service/support/declaration.html.

WEEE Information

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as the terms and conditions of such collection points.

Contact Information

• Manufactured by: NanJing CukTech Electronics Technology Co., Ltd.

• Address: 16F Building A1, Huizhi Technology Park, No. 8 Hengtai Road, Nanjing Economic and Technological Development Zone, Nanjing, Jiangsu, P.R. China
  For more details, please consult the service hotline:

• +86-400-996-1219

• service@cuktech.com

• https://cuktech.com/.

User Manual Version: V1.1

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>