UNI-T UTx313M Thermal Monocular User Manual
- June 15, 2024
- UNI-T
Table of Contents
UNI-T UTx313M Thermal Monocular
PREFACE
Thank you for purchasing the new UTx313M/UTx318M/UTx325M Thermal Imaging
Monocular. In order to use this product safely and correctly, please read this
guide thoroughly, especially the “Cautions” part.
After reading this manual, it is recommended to keep this guide at an easily
accessible place, preferably close to the device, for future reference.
LIMITED WARRANTY AND LIABILITY
Uni-Trend guarantees that the product is free from any defect in material and
workmanship within one year from the purchase date. This warranty does not
apply to damages caused by accident, negligence, misuse, modification,
contamination and improper handling. The dealer shall not be entitled to give
any other warranty on behalf of Uni-Trend. If you need warranty service within
the warranty period, please contact your seller directly.
This warranty is the only compensation you can obtain. Uni-Trend will not be
responsible for any special, indirect, incidental or subsequent damage or loss
caused by any reason or speculation. As some areas or countries do not allow
limitations on implied warranties and incidental or subsequent damage, the
above limitation of liability and stipulation may not apply to you.
Cautions
- Use or store the product at specified operating or storage temperatures to avoid damage.
- Do not aim the product at strong heat sources, such as sun, laser device, spot-welder, etc.
- Do not knock, toss, or shake the product and accessories.
- Do not place the battery in high temperature or close to the high temperature object. Do not short-circuit positive and negative electrodes of the battery. Do not place the battery in a humid environment or in water.
- Do not use dissolved or similar liquids on the product or cables.
- Please follow the following instructions to wipe the device:
- Non-optical surface: If necessary, use a clean and soft cloth to wipe the non-optical surface of the thermal imager.
- Optical surface: Do not stain the optical surface of lens when using the thermal imager. Especially not to touch lens with hands, cause it may erode the optical coating layer on the glass surface. When the optical surface is stained, wipe it carefully with a special lens paper.
- Keep it stable when using the device.
- Please cover lens and package device and its accessories into the carrying box if not needed.
- Please do not disassemble the device avoiding product damage and loss of warranty rights.
- Due to different batches, the materials and details of actual products may be slightly different from the graphic information. Please refer to the goods received.
- The experimental data in the manual are theoretical values and all from Uni-Trend’s internal laboratories, for reference only. Customers cannot use them as basis for placing orders. If users have any questions, please contact customer service.
Product Introduction
UTx313M/UTx318M/UTx325M Thermal Imaging Monocular has its built-in infrared detector with high sensitivity, widely used in different scenes with its convenient and portable design. It is stable and durable, nice in mid- and long-range observation and outdoor night vision.
Packing List
Product Appearance
Buttons
Display
Shortcut Menu
| Scene Modes | Bird/Forest/Rock/Custom mode. |
|---|---|
| Palette | lronbow, Black Hot, White Hot, Red Hot, Rainbow. |
| Display Brightness | Level 1-5, adjustable. |
| PIP | Picture in Picture. |
| Continuous Digital Zoom | Continuously magnify thermal images |
| Stadiametric Rangefinder | Get an approximate distance of known target. |
Menu
| Image Setting | Adjustable brightness, contrast, sharpness of thermal images. |
|---|---|
| Hotspot Tracking | Tracking frame appears on the screen and auto tracks the |
area with highest temperature.
Digital Compass| Compass appears on the upper of the screen.
WiFi
| Turn on the WiFi , After the Wi-Fi is connected, the smartphone APP can be
used.
Video Output| Type-C interface connects external display screen with images
showed on ii, meanwhile, with video output on.
---|---
Gallery| Images and video browsing.
Reticle style| Select it to mark icon and color.
Calibration| Automatic shutter/Manual shutter/Background calibration, current
calibration icon is showed on the right corner
of the main interface.
Settings| Language/Unit/Date/Time/etc.
| Languages | English/French/German/Italian/Spanish/Russian/Ukrainian |
|---|---|
| Unit | m/yd |
| Date | Date setting |
| Time | Time setting |
| Auto Standby | With this function on, auto screen off when you leave the device |
alone for 30 seconds, but screen on when the device closes to your eyes.
Auto Power| Select Auto OFF time as your need.
Compass Calibration| Calibrate electronic compass to improve its accuracy.
Defect Pixel Calibration| Correct the defect pixel to keep images integrity
and clarity.
Factory Reset| Reset the device to factory settings.
Production Information| Check the product model, software version, firmware
version, etc.
Mobile APP
Step 1
For iOS devices, download & install “Thermal Xplorer” through the Apple App
Store. For Android devices, download & install “Thermal Xplorer” through the
Google Play Store or Uni-Trend official website.
Step 2
- Turn on Wi-Fi hotspot on the device.
- Search hotspot name “318M_****” on your mobile phone.
- Connect the hotspot by entering the password 12345678.
- Enter the App to get the function of real-time screen transmission, remote viewing and images download, etc.
Note: Please keep the connection range within 10m and no obstacles to ensure the stable data transmission.
Charge
The device is supported for direct charging with 5V/2A power adapter, or
charge battery separately with a standard charging base.
Indicators identify as followings when use Type-C to charge the device
directly.
-
With red light on, the device is being charged.
-
With green light on, the device is fully charged.
Indicators identify as followings when use a standard charging base to charge the battery separately, assembling the battery as per the shown direction. -
With green light flashing, the device is Being charged.
-
With green light on, the device is fully charged.
Troubleshooting
Possible problems during the device operation are listed as followings, for your reference if any troubles on the device. If no following problems or the problem cannot be solved by yourself, please contact your supplier.
| Troubles | Reasons | Solutions |
|---|---|---|
| Fail to enable the device | Low battery | Charging |
| The device cannot be charged by external power | Loose connection | Plug again |
| USB cable damaged | Change another USB cable | |
| Too dark to see thermal images clearly | Low screen light | Improve the screen |
light
Blurred thermal images, with lines in the images or with uneven images
background| ****
Poor calibration
| Calibrate the image background as per user manual
Interface icon is clear but with blurred images
| Lens is without focusing| Rotate lens focus ring to make images clear
Dust or freeze on the internal or surface of lens
| Wipe the optical surface with a soft cloth, or leave the thermal imager in warm and dry environment
for4 hours.
Fail to connect the smartphone
| Wi-Fi password is incorrect| Enter the correct password
Many Wi-Fi options are within range, be interfered.| Reconnect it within few
Wi-Fi options range.
Without Wi-Fi or connect interrupted| Not in the Wi-Fi coverage, or obstacles
exist between device and receiver| ****
Place device on somewhere with Wi-Fi connection
Observed target disappears| Observe the target through glasses| Remove glasses
in the view
Poor images quality or the detection range is shortened| May be caused by
terrible weather (Rain, Snow, Fog, etc.)
Images quality in low temperature is worse than in normal temperature.
| When the temperature is zero above, the observed object (ambience and background) has different temperature rises due to different thermal conductivity, generating a high-temperature contrast, thus with
high-quality images. When in the low temperature condition, the observed object (background) cools until its temperature similar to conditions’, temperature contrast is sharply decreased, thus with poor-quality images. It is one of the features of thermal imagers.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Please note that changes or modifications of this product is not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Product Label
- The contents of this manual are subject to change without prior notice *