Liipoo RITP02 Intelligent Temperature and Humidity Meter User Guide

QUICK START GUIDE
for Smart Digital Thermometer
with Hygrometer
Shenzhen Bang Fu Industrial Co., Ltd.

RITP02 Intelligent Temperature and Humidity Meter

“Thank you for purchasing our smart diital thermometer with temperature and humidity monitoring function.
It is an inteligent two-in-one product that not only detects body temperature and sets high-temperature warnings. butalso serves as a Hygrometer, monitoring the temperature and humidity indoors for healthiness.Now I will show you how to use and set up this
unique product! (Note: *Smart Digital Thermometer with Hygrometer” hereinater referred to s “the Hygrometer”, Wireless Electronic Thermometer” hereinafter refered to as “the Thermometer”.)(Real.time indoor temperature (Real-time body temperature display) and humidity monitoring)

KEYS AND FUNCTIONS

Three indoor product placement modes:
a) Placement modes: unfold the stand, stand it on the table, bedside table,or other platform surfaces.
b) Magnet mode: fold the stand and attach to the rfrigerator or other ‘magnetic metal surfaces
C) Hook mode: fold the stand and hang on the wallwith a simple hook.

SCREEN DISPLAY

Body temperature mode:

1. : Successful pairing with thermometer. Appears when the Hygromete is successfully paired with the thermometer.

2. wall : Signal intensity. Shows the intensity of the connecting signal with the paired thermometer that affects the update speed of data display.

3. Pairing : Pairing mode. Indicates that the Hygromete is entering pairing mode. Disappears when pairing is completed.

4. : Battery of the thermometer;
   : appears and flashes, indicating that the thermometer battery is too low and that the battery should be replaced.

5. : Battery of the Hygromete;
   appears and flashes, indicating that the Hygromete battery is too low and that the battery should be replaced.

6. : Indicates that the real-time body temperature is < 37.5°C (99.1°F);
   : Indicates that the real-time body temperature is 2 37.5°C (99.1°F).

7. : Indicates that the body temperature trend in the last hour is increasing;
    : Indicates that the body temperature trend in the last hour is decreasing.

8. :Maximum body temperature in the last hour.

Room temperature mode:

1. Room temperature and humidty mode.
2. Indicates a comfortable environment;
   Indicates an uncomfortable environment.

Comfort level icon details:

Temperature
Humidity| Temperature
<20°C(68°F)| 20°C(68°F)temperature
(26°C(78.8°F)| Temperature

26°C(78.8°F)
---|---|---|---
Humidity<30%| | |
30% Humidity 60%| | |
Humidity>60%| | |

PRODUCT OPERATION GUIDE

step 1 : Take out the thermometer and turn it on;

1. Open the cover from the “depression atthe ears”
2. Insall the battery with the”side” upward
3. Close the cover; the productis started when the bluelightisonfor 25

step(ll) : Remove the battery’s protective film; 1. open the cover of the battery holder and take out the battery. 2. Remove the protectve film. 3. Install the battery again with the” +side”

step (lll): Pair with the thermometer; 1. Long press for 3stotumon theygrometer. 2. Toggle to the Temp mode. 3. pres paiing for 3s. pairing icon appeats on ta sereen. 4. Put the thermometer close o the Hygrometer When the icon appears, EpaIngls ksl Akervircs the ot ondeappear

step(Iv) : Wear the thermometer;

1. Toke out the ticker, 2. Stck it tothe surfaceof the thermometer with metal bumps. 3. Remove the white film,4. Stick under thearm, four fingers below the ammpit)

step (V) : Eliminate high body temperature warnings; 1. The body temperature waring threshold s 38 (100.4°F), When the temperature exceeds the threshold, body/ Backightfashes the buzzer sounds and the Backight fashes. 2. When you tap , thewarningis eliminated, the buzing S0ps, nd the backight goesour. 3. There will be no warning within 30 mins when a warning is eliminated.
Step VI : Turn off the thermometer after temperature measurement;

1. After temperature measurement, remove the thermometer and remove the sticker, put the thermometer back in the storage bag.
   The thermometer automatically tums off (do not wear in the shower).

2. Before reuse, take the thermometer out of the storage bag.
   The blue light stays on for 2s. The thermometer turns on automatically.

Step (VII) : Pair with another new thermometer;

1. Place the old thermometer more than 3m from the Hygrometer, bring the new one close to the Hygrometer, long press the pairing key, the pairing icon appears on the screen.
   

2. The pairing icon disappears after successful pairing. Reset the value of .

Step (VIII) : Switch to room temperature mode;

Toggle the mode switch key to “O%RH”.
step IX : Reset the value;

1. When the thermometer is turned off or away from the Hygrometer for more than 3h, the Hygrometer will ge into sleep mode. Toggle the mode key to tum it off and on again to activate the Hygrometer.
2. When the thermometer is handed over to another body temperature measurement person, the value of §§ may be reset by toggling to turn the Hygrometer off and on again.

BASIC PARAMETERS

CLEANING AND MAINTENANCE

1. Avoid water when cleaning the Hygrometer.
2. The dity surfaces of the Hygrometer may be wiped with a soft cloth dipped n neutraldetergent.

CAUTIONS

1. The temperature and humidity collection hole of the Hygrometer Should not be submerged in water, When instaling and using the. Hygrometer, do not block the temperature and humidity collection hole.
2. Do not use the Hygrometer n an environment below 0°C (32°F) or above 70°C (158°F). Keep the Hygrometer away from harsh environments such as low and high temperatures.
3. D0 ot overfold the stand to avoid damaging it
4. The Hygrometer s not intended for use as a measuring Instrument

NAME AND CONTENT OF HAZARDOUS SUBSTANCES IN THE PRODUCT

mechanism**
Lead (Pb)| 0| 0| 0| 0
Mercury (Hg)| 0| 0| 0| 0
Cadmium (Cd)| 0| 0| 0| 0
Hexavalent chromium (Cr6+)| 0| 0| 0| 0
Polybrominated biphenyls (PBBs)| 0| 0| 0| 0
Polybrominated diphenyl ethers (PBDEs)| 0| 0| 0| 0
Dibutyl phthalate (DBP)| 0| 0| 0| 0
Benzyl butyl phthalate (BBP)| 0| 0| 0| 0
Bis(2-ethylhexyl) phthalate (DEHP)| 0| 0| 0| 0
Diisobutyl phthalate (DIBP)| 0| 0| 0| 0
Q Indicates that the content of the hazardous substance in all homogeneous materials of the part is below the limit requirements specified in Directive 2011/65/EU (ROHS) & itsamendment Directive (EU) 2015/863.| x: indicates that the content of the hazardous substance in a certain homogeneous material of the part exceeds the limit requirements specified in Directive 2011/65/EU (ROHS) & itsamendment Directive (EU) 2015/863.

PACKING LIST

AFTER SALES INSTRUCTIONS

When the Hygrometer is turned on, the screen does not display or cannot display completely| A. The button battery runs out| A. Replace new batteries of the same model (model: CR2450)
B. No battery is installed| B.Install new batteries of the same model (model: CR2450)
C.Batteries are installed wrongly| C. Correctly install batteries
There is no value inthe body thermometer display mode or the value is not updated| A. The battery of the thermometer runs out| A. Replace the battery of the thermometer(battery model: CR1225)
B. The Hygrometer is too far from the thermometer, or the signal is blocked by an obstacle| B.Put the thermometer close to the product
C.The Hygrometer is sleeping| C. Turn off and then turn on again, or toggle the mode key

FCC Information and Copyright

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC RF warning statement: the device has been evaluated to meet general RF exposure requirement , The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>