LUXPRO LP387 Rechargeable 360° Swivel LEDWork Light User Manual
- June 4, 2024
- LUXPRO
Table of Contents
LUXPRO LP387 Rechargeable 360° Swivel LED Work Light
Features
- Rugged-durable design
- Strong magnet base
- 360° swivel capabilities
- Rechargeable 2300mAh battery (USB cable included)
- Battery indicator lights
- IPX4 waterproof rating
ANSI/PLATO FL1 STANDARD
MODES| LUMENS| RUN TIME| 
BEAM DISTANCE
---|---|---|---
High| 1000 lm| 2h| 40m
Medium| 500 lm| 4h| 30m
Low| 250 lm| 6h| 20m
Operation Instructions
On/Off: Press and release the button on the top of the light to turn on
and off. 
Cycle Modes: Press and
release the button on the top of the light repeatedly to cycle through modes
(High/Medium/Low).
Charging Instructions
The LP385 uses a Lithium 3.96V, 2300mAh rechargeable battery. To charge the
work light, first reveal the charge port by lifting the rubber dust cover on
the top of the light. 
Plug the small end of the
Micro-USB charging cable (included) into the port on the work light. Plug the
opposite end of the charging cable into a 5V USB power source.
Green battery indicator lights on the front of the light will
start blinking to indicate the light is charging. The work light is fully
charged one the indicator lights are no longer blinking.
Rechargeable battery is sealed, and replacement is not necessary.
The LP387 has a charge time of approximately 6 hours.
Product Warranty
The LP387 has a Limited 90-Day Warranty Against Manufacturer’s Defects from time of purchase. For warranty claims please contact us by calling 801-553-8886 or sending an email to info@simpleproducts.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>