Mobius 2021J901 Racing Car Series 1/10 Brushless RC Truck Instruction Manual
- June 6, 2024
- Mobius
Table of Contents
Mobius 2021J901 Racing Car Series 1/10 Brushless RC Truck
Thank you for purchasing one of our toy products. To ensure that you get the most out of your new purchase,please read these instructions carefully before using the toy for the first time.They contain important information on how to operate the product.
Caution:
Electrical product: This product is not suitable for children aged 8 or
under, When using electrical products, precautions must be taken to prevent
the risk of an electric shock.
Ensure adult supervision at all times: Warning: Do not attempt to modify
or re-assemble this product. Unauthorized changes may void your right to use
the product.
Charging the batteries
- Insert the USB plug into an indoor USB power supply, and then connect the battery compartment to the charging cable.
- The charging time is 5 hours. When the battery is charging,the light is red on. When the battery is full,the light is off.
- Regularly inspect the toy, battery charger, charging cable, connectors and other components for signs of damage.In the event of any damage, discontinue use and send the parts for repair.
Calibrating the vehicle
Instructions:
Check that the ON/OFF switch is in the” position. The vehicle will not respond
to the remote control when the switch is in the off” position.
If the vehicle strays to the left, move the calibration dial to the right
until the vehicle travels in a straight time.
If the vehicle strays to the right, move the calibration dial to the left
until the vehicle travels in a straight time
Inserting the remote control batteries
- Observe the polarity markings on the battery compartment to ensure that the batteries are inserted in the correct polarity.
- Attach the cover to the battery compartment as shown in the diagram below.
- Insert rechargeable batteries into the battery compartment.
- Use a screwdriver to secure the battery compartment cover in place.
Basic controls
Using the vehicle
- Switch on the vehicle using the ON/OFF switch.
- If the vehicle does not move in a straight line, adjust the calibration dial on the bottom of the chassis.
- Switch off the vehicle and remote control after use.
Battery safety information
- The batteries must only be charged under adult supervision.
- Before charging the batteries, remove the battery compartment from the vehicle chassis.
- Remove empty batteries from the vehicle and remote control.
- Ensure that the vehicle is switched off before inserting the batteries.
- Ensure that the batteries are inserted in the correct polarity (observe the+ and – markings on the battery compartment).
- Do not attempt to charge non-rechargeable batteries.
- Do not short circuit the battery terminals.
- If you do not plan to use the vehicle for an extended period, remove the batteries from the vehicle and remote control to prevent leakage.
- Do not throw batteries into open flames, as this may cause them to explode or leak.
- Do not mix old and new batteries or batteries from different manufacturers.
- Only use batteries from recommended or reputable manufacturers.
- Regularly inspect the batteries for signs of leakage.
- Keep this instruction manual in a safe place for future reference. It contains important information on how to use the product safely.
Care and maintenance
- Remove the batteries when you do not plan to use the toy for an extended period.
- Use a damp cloth to wipe the vehicle clean.
- Do not expose the toy to high temperatures, moisture or direct sunlight.
- Do not immerse the toy in water, as this may damage the electrical components.
Caution
Do not touch the wheels when the vehicle is moving, as this may damage the vehicle. Do not use the vehicle next to roads or other hazards, as this may cause an accident.
FCC Statement
WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void the uses authority to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radiofTV technician for help
Hereby, [SHANTOU CITY YONGDALI TECHNOLOGY INDUSTRIAL CO.,LTD], declares that
this [J901] is in compliance with the essential requirements and other elevant
provisions of Directive 2014/53/EU The full test of the EU declaration of
conformity is available at the following internet
address: https://www.11467.com/shantou/col175315.htm
frequency band: 2405-2,173MH·1,
EIRP POWER: -1. 29dBm (Max. Measured)
If the below information is not affix in the label(because of label size),
manual need add·
Name of manufacturer: SHANTOU CITY YONGDALI TECHNOLOGY INDUSTRIAL CO., LTD
Address: GUANGYI ROAD, GUANGYI ST., CHENGHAI DISTRICT, SHANTOU CITY, GUANGDONG
OF CHINA Contact person:LIN HUAZUN
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>