HAITIANGAO W-S3 Magnetic Charging Smart Watch Magnetic Charging User Manual

HAITIANGAO W-S3 Magnetic Charging Smart Watch Magnetic Charging

PRODUCT SPECIFICATIONS

For Apple Watch Charger

• Charger Color: whiteMaterial: Zinc alloy+ PC Current: 1A
• Output: 2.5W
• Operating Temperature: -1 O°C-50°C
• Ambient Humidity: 35% -85%
• N.W: 20g
• G.W: 31g
• Size: 4.02.80.7cm
• Packaging: 9.60″7.14″1.48cm

Feature

• Lightning Port + Type C port
• Quick Charger(For a better charging experience, it is recommended to use 5V/1Aadapter or above)
• Compatible with Apple Watch Series 9/8/7/ 6/5/4/3/2/1/SE/Ultra/Ultra 2
• Compatible with Apple Watch 38mm/40mm/ 41 mm/42mm/44mm/45mm/49mm
• Strong Magnetic Suction- Build in the latest magnetic adsorption module, and charge immediately after contact.
• Portable Mini Size & Charge on the go, This Small and compact wireless charger for your watch, is easier to take anywhere.

PLEASE NOTE:

• Please connect the wireless charger to the original power adapter with an output of 5V/1A or above, and the charging effect will be faster;
• Do not use the charger with electronic products that do not meet the specifications, so as not to cause any problems due to mismatched specifications;
• It is normal for the charger to overheat a little during use.

Instructions

1. You need to prepare an adapter and a lightning cable (shared charging cable with iPhone);
2. Connect the lightning cable to Magnetic Charging;
3. Align the Apple watch back with Magnetic Charging, it will automatically absorb and start charging;
4. When the watch is fully charged, it will automatically power off;
5. Please turn off the power when you don’t need to charge.

Notice:

1. If the protective case of the watch is too thick, it may cause slow charging or no charging (please remove the protective case so that the watch can charge faster and more stably);
2. If it fails to work, please check whether the power adapter is 5V/1A or above. It is recommended to try an adapter with 5V/1 A or above for better charging effect;
3. If it cannot work, please contact us in time, we will solve your problem within 24 hours!!!

PRECAUTIONS FOR USE

• If you’re not using the Apple Watch charging cable, disconnect it. The wrong charging method can damage the charging cable. Always avoid moisture while charging.
• Liquid (sweat, drinking water, etc.) or foreign matter on the connector part, Be careful not to allow (fine dust, dust, metal pieces, etc.) to adhere.
• Do not touch the power supply with wet hands.
• Worn cable, broken insulation. or broken. Never use a device with a plug that has a plug.
• Charging your Apple Watch with the case removed is recommended.
• Places that get hot (near fire, near stove, etc.) Use or leave in a place where flammable gas is generated Please do not.
• Places exposed to direct sunlight or extremely cold, Do not store in a place with high humidity or dust, Apple Watch in a microwave oven, high-pressure container, etc.
• Do not drop or throw it under strong impact. Do not disassemble or modify.

Package Included

• 1 x Smart Watch Magnetic Charging
• 1 x Instruction Manual

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,  the user is encouraged to try to correct the interference by  one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>