Vegas 0808 Mid Tower E-ATX ATX Gaming PC Case Instructions

June 15, 2024
Vegas

**Vegas 0808 Mid Tower E-ATX ATX Gaming PC Case Instructions

**

ASSEMBLY  INSTRUCTION

Case Features

Optimized

Air Flow Fan

Included Tool-Less Tempered Glass

Magnetic Filter

Accessories

Item Name/O’ty Used for
Cable ties x5 Cable management
Rubber blanketx4 Install HDD
Screw #6-32 6.5mmx3 Motherboard stud
Screw M3 5mm x19 PSU/PCIe Card
Screw #6-326mm 3.5″ HOO
x10mm x1 Install copper cylinder

STEP A: Disassemble the side panel and the front panel

Please remove the side panels before disassembling the front panel

STEP B: Install the power supply

Please make sure that the holes of power supply aim at case cooling vents when installing power supply.

STEP C: Install the motherboard
Please make sure that the motherboard aims at the copper cylinder and fix motherboard with screw “M3 5mm.
Note: If the copper pillar of the case drops off please fix it with screw

6-32 6.5mm” copper cylinder.

STEP D: Install fan and radiator

Front: 120mm3/140mm
3 Rear: 120mm1 Top:
120mm
3/140mm*2

STEP E: Install HDD

Hard disk enclosure for both SSD and HDD; Unscrew hand disk enclosure and install HDD with screws

STEP F: Install the SSD

Hard disk enclosure for both SSD and HDD; Unscrew hard disk enclosure and install HDD with screws

STEP G: Install fan and radiator

Remove the baffle marked in the picture, make sure the VGA card aims at the motherboard slot and then fix VGA card and case with “#6-32 6mm screw. VGA card bracket is eqipped, which can be adjusted according to VGA card location,

Panel

case AzaliaHD Audio connector

case USB connector

case USB3.0 connector (Optional)

Motherboard HD Audio connector

Motherboard USB connector

Motherboard USB3.0 connector

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals