calcert HL 2020 E Professional Heat Guns Instruction Manual
- June 15, 2024
- Calcert
Table of Contents
calcert HL 2020 E Professional Heat Guns
Product Information
Specifications
- Product Name: HL 2020 E
- Type: 3522
- Regional Version: Shape depends on the regional version
Spare Parts List
| Pos. Part No. | Spare Part Name | Quantity |
|---|---|---|
| 1 | Housing Set HL 2020 E US | 1 |
| 2 | Protection Tube HL 1820-2320 US | 2 |
| 3 | Power Cord HL 2020-2320 US | 1 |
| 4 | Switch HL 1820-2320 US | 1 |
| 5 | Electronic Unit HL 2020 E US | 1 |
| 6 | Motor Unit HL 1820-2020 US | 1 |
| 7 | Heating Element HL 2020/2320 US | 1 |
Wiring Diagram
A wiring diagram for the HL 2020 E is provided in the user manual.
Contact Information
For any inquiries or support, please contact:
- Phone: 1.888.610.7664
- Email: sales@calcert.com
Product Usage Instructions
Step 1: Assembly
- Start by unpacking all the spare parts listed in the Spare Parts List section.
- Attach the Housing Set HL 2020 E US to the main body of the product.
- Connect the Protection Tubes HL 1820-2320 US to the appropriate connectors on the product.
- Insert the Power Cord HL 2020-2320 US into the designated power input on the product.
- Mount the Switch HL 1820-2320 US on the product’s control panel.
- Install the Electronic Unit HL 2020 E US and Motor Unit HL 1820-2020 US in their respective slots.
- Attach the Heating Element HL 2020/2320 US to the designated area on the product.
Step 2: Wiring
Refer to the provided Wiring Diagram to correctly connect the various cables and wires. Follow the color codes and ensure proper insulation and secure connections.
Step 3: Operation
- Make sure the product is plugged into a suitable power source.
- Turn on the Switch HL 1820-2320 US to activate the product.
- Follow the specific instructions for the desired operation of the HL 2020 E.
Step 4: Maintenance
Regularly clean and inspect the product for any signs of damage or wear. Replace any faulty or worn-out parts with the corresponding spare parts listed in the Spare Parts List section.
Step 5: Troubleshooting
If you encounter any issues with the HL 2020 E, refer to the Troubleshooting section in the user manual for possible solutions. If the problem persists, contact our customer support for assistance.
Step 6: Safety Precautions
Always follow these safety precautions when using the HL 2020 E:
- Read and understand the user manual before operating the product.
- Ensure a stable and well-ventilated working environment.
- Do not expose the product to water or other liquids.
- Keep hands and loose clothing away from moving parts.
- Unplug the product before performing any maintenance or repairs.
FAQ (Frequently Asked Questions)
Q: What is the regional version of the HL 2020 E?
A: The shape of the HL 2020 E may vary depending on the regional version.
Q: How can I obtain spare parts for the HL 2020 E?
A: Refer to the Spare Parts List section in the user manual for a list of
available spare parts. Contact our customer support for purchasing and
assistance.
Q: What should I do if the product doesn’t turn on?
A: Ensure that the Power Cord HL 2020-2320 US is properly connected and that
the power source is functioning. If the issue persists, refer to the
Troubleshooting section in the user manual or contact our customer support.
Q: Can I use the HL 2020 E with an extension cord?
A: It is recommended to directly plug the product into a suitable power
source. If an extension cord is necessary, ensure it is of adequate capacity
and in good condition.
spare Parts List HL 2020 E
Wiring Diagram HL 2020 E
- 1.888.610.7664
- www.calcert.com
- sales@calcert.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>