OneOdio Studio Wireless C Bluetooth Headphones Over Ear User Manual

: June 14, 2024
: OneOdio

Table of Contents

OneOdio Studio Wireless C Bluetooth Headphones Over Ear
Product Information
Product Usage Instructions
IMPORTANT SAFETY INSTRUCTION
REGULATORY INFORMATION
FCC Warning
Overview
Charging
How To Use
Bluetooth Connecting
Connect With Other Device
Specification
Accessories
Limited Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

OneOdio Studio Wireless C Bluetooth Headphones Over Ear

Product Information

The Studio Wireless C headphones are a high-quality audio product manufactured by OneOdio. These headphones provide wireless connectivity via Bluetooth technology, allowing users to enjoy their favorite music and make phone calls without the hassle of wires. The headphones are designed for comfort and offer excellent sound quality. It is important to note that the Studio Wireless C headphones contain small parts that may pose a choking hazard, making them unsuitable for children under the age of 3. Additionally, the headphones contain magnetic material, and users with implantable medical devices should consult their physician to determine if this may affect their medical device.

This product complies with the essential requirements and relevant provisions of Directive 2014/53/EU and other applicable EU directive requirements. The complete declaration of conformity can be found on the OneOdio website at www.oneodio.com.

Product Usage Instructions

Do NOT use your headphones while driving for phone calls or any other purpose.
If the headphones emit any loud unusual noise, turn them off immediately and contact OneOdio customer service.
If you experience a warming sensation or loss of audio, remove the headphones immediately.
Do NOT use mobile phone adapters to connect the headphones to airplane seat jacks to avoid injury or property damage due to overheating.
Do NOT use the headphones as aviation communication headsets except in case of emergency.
Keep the headphones away from children under the age of 3 due to small parts that may pose a choking hazard.
To reduce the risk of fire or electrical shock, avoid exposing the headphones to rain, liquids, or moisture.
Do NOT make unauthorized alterations to the headphones.
Only use an agency approved power supply that meets local regulatory requirements.
Avoid exposing the headphones to excessive heat.
If experiencing interference, reorient or relocate the receiving antenna, increase the separation between equipment and receiver, or consult a professional for assistance.
Any changes or modifications not approved by YI ZHAO (SHENZHEN) CO.,LIMITED could void the user’s authority to operate this equipment.
According to regulations, unauthorized frequency changes, enhanced transmitting power, or alterations to the original characteristics and performance of low-power radio-frequency devices are prohibited.
Dispose of batteries or accumulators properly and do not dispose of them with household waste if they contain mercury (Hg), cadmium (Cd), or lead (Pb).

IMPORTANT SAFETY INSTRUCTION

Please read and keep all safety and use instructions.

WARNING/CAUTION

Do NOT use the headphones at a high volume for any extended period.
- To avoid hearing damage, use your headphones at a comfortable, moderate volume level.
- Turn the volume down on your device before placing the headphones in/on your ears, then turn the volume up gradually until you reach a comfortable listening level.
Do NOT use your headphones while driving for phone calls or any other purpose.
Do NOT use the headphones at any time the inability to hear surrounding sounds may present a danger to yourself or others, e.g., while riding a bicycle or walking in or near traffic, a construction site or railroad, etc.
- Remove the headphones, to ensure you can hear surrounding sounds, including alarms and warning signals.
- Be aware of how sounds that you rely on as reminders or warnings may vary in character when using the headphones.
Do NOT use the headphones if they emit any loud unusual noise. If this happens, turn the headphones off and contact OneOdio customer service.
Remove headphones immediately if you experience a warming sensation or loss of audio.
Do NOT use mobile phone adapters to connect headphones to airplane seat jacks, as this could result in injury or property damage due to overheating.
Do NOT use the headphones as aviation communication headsets except in case of emergency.
- No incoming audio will be heard with a discharged or improperly installed battery. This could result in the potential of missed communications while piloting an aircraft.
- Extremely loud ambient noise levels common to many propeller-driven aircraft may impair your ability to receive incoming audio communications, particularly during takeoff and climb out.
- The headphones are not engineered for noise conditions, altitude, temperature or other environmental conditions common in non-commercial aircraft, resulting in possible interference to critical communications.
- Contains small parts which may be a choking hazard. Not suitable for children under age 3.
- This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.
To reduce the risk of fire or electrical shock, do NOT expose this product to rain, liquids or moisture.
Do NOT make unauthorized alterations to this product.
Use this product only with an agency approved power supply which meets local regulatory requirements (e.g., UL, CSA, VDE, CCC).
Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, fire or the like).

REGULATORY INFORMATION

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by YI ZHAO (SHENZHEN) CO.,LIMITED. could void the user’s authority to operate this equipment.

This device complies with part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation. This device complies with FCC and Industry Canada radiation exposure limits set forth for general population. It must not be co-located or operating in conjunction with any other antenna or transmitter.

Meets IMDA Requirements.

CAN ICES-3 (B)/NMB-3(B)

Management Regulation for Low-power Radio-frequency Devices

Article XII
According to “Management Regulation for Low-power Radio-frequency Devices”
without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to an approved low power
radio-frequency devices.

Article XIV
The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications operated in compliance with the Telecommunications Act. The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices.

DON’T attempt to remove the rechargeable lithium-ion battery from this product. Contact your local Oneodio retailer or other qualified professional for removal.

YI ZHAO (SHENZHEN) CO.,LIMITED. hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements. The complete declaration of conformity can be found at: www.oneodio.com.

For Europe:

Frequency band of operation 2400 to 2483.5 MHz:

Bluetooth: Maximum transmit power less than 20dBm EIRP.

Please dispose of used batteries properly, following local regulations. Do not incinerate.

REGULATORY INFORMATION
Information on electrical and electronic equipment

The following notice is aimed at private end users who use electrical and/or electronic devices.

Separate collection of old devices
Electrical and electronic equipment that has become waste is referred to as waste equipment. Owners of old devices must collect them separately from unsorted municipal waste. In particular, old devices do not belong in household waste, but in special collection and return systems.
Batteries and rechargeable batteries
As a rule, owners of old devices must separate old batteries and accumulators that are not enclosed by the old device from it before handing them over to a collection point. This does not apply if the old devices are handed over to public waste disposal authorities and are separated there from other old devices in order to prepare them for reuse.
Options for returning old devices
If you own old devices, you can hand them over to the options set up and available by public waste disposal authorities for the purpose of proper disposal of old devices. It may also be possible to hand in electrical and electronic equipment there for the purpose of reusing the equipment. You can obtain more detailed information on this from the respective collection or collection point.
Privacy Notice
Old devices often contain sensitive personal data. This applies in particular to information and telecommunications technology devices such as computers and smartphones. In your own interest, please note that each end user is responsible for deleting the data on the old devices to be disposed of.
Meaning of the crossed-out dustbin symbol
The symbol of a crossed-out garbage can, which is regularly shown on electrical and electronic devices, indicates that the device in question must be collected separately from unsorted municipal waste at the end of its service life.

The crossed-out wheeled bin symbol on batteries or accumulators means that they must not be disposed of with household waste at the end of their useful life. If batteries or accumulators contain mercury (Hg), cadmium (Cd) or lead (Pb),
you will find the respective chemical symbol below the symbol of the crossed- out garbage can. You are legally obliged to return old batteries and accumulators after use. You can do this free of charge at a retail store or at another collection point near you. Addresses of suitable collection points can be obtained from your city or local government. Batteries may contain substances that are harmful to the environment and human health. Particular caution is required due to the special risks involved in handling lithium- containing batteries. The separate collection and recycling of old batteries and accumulators is intended to avoid negative effects on the environment and human health.

Please avoid generating waste from old batteries as much as possible, e.g. by giving preference to batteries with a longer lifespan or rechargeable batteries. Please avoid littering public spaces by not leaving batteries or battery-containing electrical and electronic devices lying around. Please explore ways to recycle a battery instead of disposing of it, such as reconditioning or repairing the battery.

Charging temperature range: 0° C – 45° C
Discharging temperature range: -20° C – 60° C

EC REP

C &E Connection E-Commerce (DE) GmbH

Add.: Zum Linnegraben 20, 65933, Frankfurt am Main, Germany
Tel. +4906927246648
E-Mail: info@ce-connection.de.

UK rep

APEX CE SPECIALISTS LIMITED

Add.: 89 Princess Street, Manchester, M1 4HT, UK
Tel. +441616371080
E-Mail: info@apex-ce.com

Manufacturer: YI ZHAO (SHENZHEN) CO., LIMITED

Add.:
6th Floor, T3 Creative Building, Shenzhen Colorful Huiwei Cuitural And Creative Expo City, No. 5010 Baoan Avenue, Caowei Community, Hangcheng Street, Baoan District, Shenzhen.

UK Declaration of Conformity
Hereby, YI ZHAO (SHENZHEN) CO., LIMITED declares that the product type Y80B is in compliance with following Directives: Radio Equipment Regulations 2017, Electrical Equipment (Safety) Regulations 2016 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the UK declaration of conformity is available at the following internet address: www.oneodio.com info@oneodio.com.

Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss.
Caution: risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
The device complies with RF specifications when the device used at 0mm form your body.

Manufacturer’s Name: YI ZHAO (SHENZHEN) CO., LIMITED
Product: Wireless headphone
Model number: Studio Wireless C

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Overview

Charging

How To Use

Bluetooth Connecting

Connect With Other Device

Specification

Accessories

3.5 mm Audio Cable with In-Line Mic
Portable Bag
Micro USB Charging Cable
User Manual

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic

Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

RF exposure statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Limited Warranty

Our friendly customer service team are ready and waiting to help. Here is how you can contact us:

Global: info@oneodio.com
India: support@oneodio.in
Global: oneodio.com/pages/support
Japan: oneodio.jp/pages/support
India: oneodio.in/pages/support.
Global: +85269403848 (Mon to Fri 9:00 am-6:30 pm, UTC +8 HKT)
India: +91-7676831995 (9:30 to 17:30 active time, IST, Mon to Fri)

EC/REP

C &E Connection E-Commerce (DE) GmbH

Add.: Zum Linnegraben 20, 65933, Frankfurt am Main, Germany
Tel.: +4906927246648
Email: info@ce-connection.de.

UK/REP

APEX CE SPECIALISTS LIMITED

Add.: 89 Princess Street, Manchester, M1 4HT, UK
Tel.: +441616371080
Email: info@apex-ce.com.

Manufacturer: YI ZHAO (SHENZHEN) CO., LIMITED

Add.: 6th Floor, T3 Creative Building, Shenzhen Colorful Huiwei Cultural and Creative Expo City, No. 5010 Baoan Avenue, Caowei Community, Hangcheng Street, Baoan District, Shenzhen City, Guangdong Province, China.
Email: info@oneodio.com.
Tel.: +85269403848

Made In China.