Petbank CY-009 Automatic Fish Feeder User Guide
- June 15, 2024
- Petbank
Table of Contents
Petbank CY-009 Automatic Fish Feeder
How Do We Start?
-
Switch on/off: Press the power button for 3 seconds.
-
Calibrate real-time clock
(To make sure the fish feeder drop food on time)
-
Finish real-time clock
Choose the Applicable Mode
-
Mode I: Custom Feeding Mode
For fish that need to be fed multiple times a day. Supports up to four automatic feedings per day, and the number of feedings can be customized. -
Mode II: Simple Interval Feeding Mode
For fish that only need to be fed once at regular intervals. Support every 8H/12H/24H/48Hauto feeding once. -
Mode III:
Immediate Manual Feeding Feed the fish manually at any time.
Attention
When the real-time clock is set, the program will automatically enter the Custom Feeding Mode settings.
If you want to choose the custom feeding mode， keep going with the next page setting guidance.
If you do not want to choose this mode, instead of pressing the up/down button
to select the time, press “MANUAL” to quit, and the interface returns to
display the real time, and then refer to the interval feeding mode settings.
-
How to Set Mode
Set Feed Time : Press “SET” button, the hour number and the first box flash. Press “+” or ‘”-” to adjust the hours, press “SET” again to adjust the minute number.
Set the Number of Turns : Continue Press “SET” button with the first box lashes, then click ‘+’ or ‘-‘ to adjust the number of feeding laps you want- for 1 cycle,
- for 2 cycles,
- for 3 cycles
If not, keep the rest box blank, and press “MANUAL” to save the current setting and exit.
Note: In this mode, you can set up to four different time points for
automatic feeding, each time point can set a different feeding amount
(increase the feeding amount by increasing the number of turns of the feeder,
up to 3 turns per meal). After the setting is successful, the feeder will
automatically drop the amount you set at the corresponding time everyday
Press “+” and “-” buttons simultaneously to enter 8H/12H/24H/48H programmed
interval feeding mode.
Press “+” or “-” button to select one interval time. The corresponding box
will flash when the time is selected. This programmed feeding mode feeds once
at the default time. And the countdown will start again after each feeding.
Note: If you want to feed fish food at an exact time, set this interval feeding mode at that time.
-
Mode II：Simple Interval Feeding Mode
If there is no activity for morethan5seconds, the setting is automatically saved and the display will lock. If you need to adjust it again, press”+” or”-“button for 3 seconds to unlock. Press “+” and “-” buttons simultaneously again to exit smart interval feeding mode, and back to customised feeding mode.
-
How to Reset the Program
-
Mode III: Immediate Manual Feeding
Note:
Manual feeding does not affect the preset program
Attention!
After fixing the position of the feed slider,please use manually feeding test
whether the amount of food dropped by the rotation of the feeder is reasonable
before feeding to avoid excessive feeding by the fish!
Contact Us
- You can watch the operation guide video on the Petbank Facebook page: https://www.facebook.com/watch/?v=672094934426888
- If you encounter any problem during use,please feel free to contact us, we’ll reply promptly.
customer-support@petbank-co.com
INS:@petbankfans
FB: @Petbank
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>