maxwest NITRON62 Mobile Phone User Manual

maxwest NITRON62 Mobile Phone

Overview

1. Front Camera
2. Volume Keys
3. Power Key
4. Menu
5. Home
6. Back
7. Rear Camera
8. Flash

SIM Card Installation

A SIM card contains your phone number and other necessary data. Your device has a SIMI slot that supports 4G (CT E).
To Install the SIM Card

1. Make sure the device is turned off and the front facing down. Hold the firmly and use the notch at the bottom corner to loosen the cover. Use material with a hard, thin edge such as your fingernail or a credit card to carefully run along the seam to loosen, then lift the cover until it detaches completely.
2. Remove the battery if it is in. Locate the SIM card slot and insert the proper SIM card into the proper slot. For more information on SIM card installation, check out the included SIM Card & Micro SD Card Installation Guide.
3. TO turn on/off a SIM card go to Settings > SIM management, then slide the SIM card sliders. To turn on/off a SIM card’s data connection, go to Settings > SIM management, click on the “Data connection” option, and select a SIMI card that has 4G capability.

Keys/Touch Points

• Power Key: To power it on/off, press and hold the power key for a few seconds. When it is ON, press the power key once to activate or deactivate the screen.
• Home key (O): Touch the key to return to the home screen. In ‘dle screen, touch and hold the key to view recently opened apps,
• Options key( ): In the home screen, touch the key to set wallpaper, manage apps, and access system settings. Touch it to view menu options.
• Back key ( ): Touch to go back to the previous menu.

Charging battery

New batteries are shipped partially charged. Before using your device, install and charge the battery. Batteries perform best after several full charge/discharge cycles.
Charging Your Battery
Please charge the battery using the following methods:

1. Charge the phone by connecting it to a computer via the USB cable.
2. Connect the USB cable to the phone and the AC adapter. Plug the
   • AC adapter into an electrical outlet to start charging.
   • As the battery charges, an icon will appear in the status bar of the home screen.
   • When the battery is fully charged, a full battery icon appears on the screen.

Warning:

• Do not remove the battery while the device is charging.
• Use only the AC adapter & USB cable provided with your device.
  • Note: For safely, the battery will stop charging if in danger of overheating.

Audio Profile/Sleep Mode

Intelligent keyboard

• From the home screen, swipe up to open APP Drawer & select “Settings”.
• GO to “Sound ” and change the audio settings by Changing Sound levels and change your ring tones.

Sleep Mode

Turn on sleep mode to save your battery power.

1. On the home screen, touch “App Menu” & select “Settings”.
2. Select ” Display”
3. Select “Sleep” and choose a time interval from the list.

Screen Lock

1. On the home screen, touch the “APP Menu” & select “Settings”.
2. Select “Security and location ” then select “Screen lock”
3. Select the desired type of lock & follow the prompts to set up.

Phone Features

Description Icons

Main Menu & Its Functions

Select to enter the main menu•• Allows you to view a list of features available on your phone.

1. Clock
   • Allow you to set the Alarm from the Clock.
2. Browser
   • Browse the internet. Search engine- default set as Google.
3. Calculator
   • Allows you to make tedious calculations quickly.
4. Calendar
   • View the calendar & add events.
5. Camera
   • Allow you to click pictures anytime you want.
   • Your NITRO N62 has a 5.0 MP high-definition camera with LED Flash supporting many special features like Face Detection which ensures you take good quality pictures and store them in the Gallery.
   • In-Camera, easily choose Camcorder to record Video.
6. Contact
   • To see your list of Contacts. Access your digital phonebook through this function.
7. Email
   • Allows you to set up your POP/IMAP email accounts.
8. Gallery
   • Gallery is a light, fast and easyto use offline gallery.
9. Google Play
   • Google Play is your entertainment unbound. It brings together all Of the entertainment you love and helps you explore it in new ways, anytime, anywhere.
   • Note: To use this app please connect to an internet connection.
10. Messaging
    • Allow you to view messages sent & received as a thread
11. YouTube Music
    • The music streaming app. Made by YouTube. Discover all the music on YouTube that you can’t find anywhere else, organized in one new app and web player.
12. Phone
    • Allow you to make phone calls.
13. File Manager
    • You could browse, view, modify, and install your files.
14. MAXIM KIT
    • This service is provided by the operator. It provides phone plan information.
15. Sound Recorder
    • Allows you to record sounds.
16. Videos
    • View from the list of videos.

Phone calls/ Texting

To Make Phone Calls

1. Touch the phone icon.
2. Click on a contact from your contact list to make a call.

Composing text messages

• Maxwest automatically corrects and suggests words as you type.

Cut, Copy and Paste

• Touch and hold text content to bring up the magnifying glass, and then slide your finger to move the insertion points.
• Then choose to cut, copy, or paste. It is very easy to copy text from web pages, email, or text messages.

WLAN

Turn on WLAN

• Maxwest supports WLAN Direct which allows Android” 12 (Go edition) or later devices with the appropriate hardware to connect directly to each other via Wi-Fi without an intermediate access point.
• Using the APIs, you can discover and connect to other devices, if each device supports Wi-Fi
• Direct, then communicate over a speedy connection across distances much longer than a Bluetooth connection. This is useful for applications that share data among users, such as a multiplayer game or file sharing.
  • a. Enter “Settings”>> Click “NETWORKS & internet >> Select “Wi-Fi ” >>Select ” Wi-Fi Preference >> Select “Advanced >>Then click ” Wi-Fi direct ” to access Wi-Fi direct feature.
  • b. After click ” Search ” at the bottom and it will display the available devices.
  • c. Click “DIRECT-73-HP M252 LaserJet” (in this case specifically) and it will give you the option to connect.
  • d. Click “Connect” to connect and it will pop up an interface to confirm like below.

Camera

• e. Click “0K” and the devices will be connected

Camera

• Capture images or record videos and share with family and friends!
  

Connecting to E-mails

• Log into your e-mail accounts.
  • You may log in to your e-mail accounts from the phone to access your e-mails.
  • From the Home screen select Application “Gmail Go” and then Enter your email address, and password and tap “Next”.
  • Select which type of email account you are setting up and enter the proper settings. ( POP3 / IMAP / Microsoft Exchange Account)
  • You will need to enter your username, password, and server information depending on the type of email account or you can change the settings by tapping “Manual setup” at the top right corner screen. Tap “Next” and select “0K” to accept.

Compose new:

1. Press MENU & select “Compose”.
2. Add recipients by typing a name or email address in the “To” field . Matching contacts will appear. Select a recipient or continue typing in the email address to send to multiple contacts.
3. Once finished typing the mail, elect “Send”, “Save as draft” , or “Discard”
4. The reply tab contains “Reply”, Reply all ” and “Forward” options.

Delete message:

1. Go to Inbox to display messages.
2. Touch & hold the message you want to delete.
3. Select “Delete”.

File Transfer

Connecting Smartphone to PC

• Connect the USB cable to your smartphone and computer. Once connected successfully, on your phone, slide the top menu down and click on ” Android System ” , then, press the ” Transfer Files “button.
• A new storage named NITRO will appear on your PC file” My Computer “. Click on it to review files in the smartphone and/or to transfer documents between devices. When finished, press disconnect device from the PC.
• Note: Photos taken with the camera will be saved under the “DCIM” folder. Screenshots captured will be saved under the “Pictures” folder Put Music files in the “Music” folder for the files to be played properly.

Screen Capture

• Press the Volume(-) and the power button at the same time to capture a” Screenshot”.
• All captured screenshots will be saved under the gallery.

Warning

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC/ISEDC Rules and Industry Canada license-exempt RSS standard (s).
Operation is subject to the following two conditions:

1. this device may not cause interference
2. this device must accept any interference, including interference that may cause undesired operation of the device.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC/ISEDC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet and a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

SAR tests are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value, in general, the closer you are to a wireless base station antenna, the lower the power OUtPUt. Before a new device is available for sale to the public, it must be tested and certified to the FCC/ISEDC that it does not exceed the exposure limit established by the FCC/ISEDC, Tests for each device are performed in positions and locations as required by the FCC/ ISEDC. For body-worn operation, this device has been tested and meets the FCC/ISEDC RF exposure guidelines when used with an accessory designated for this product or when Used with an accessory that contains no metal and that positions the handset a minimum of 10 mm from the body. Non-compliance with the above restrictions may result in a violation of RF exposure guidelines.

Hearing-Aid Compatibility HAC Statement

• Your phone is compliant with the FCC Hearing Aid Compatibility requirements.
• The FCC has adopted HAC rules for digital wireless phones.
• These rules require certain phones to be tested and rated under the American National Standard Institute (ANSI) C63.19-201 1 hearing aid compatibility standards. The ANSI standard for hearing aid compatibility contains two types of ratings:
  • M-Ratings: Rating for less radio frequency interference to enable acoustic coupling with hearing aids.
  • T-Ratings: Rating for inductive coupling with hearing aids in telecoil mode.
• Not all phones have been rated. A phone is considered hearing aid compatible under FCC rules if it is rated M3 or M4 for acoustic coupling and T3 or T4 for inductive coupling.
• These ratings are given non a scale from one to four, where four is the most compatible.
• The tested M-Rating and T-Rating for this device is M4 and T3.

Android, Google Play, YouTube, and other marks are trademarks of Google LLC.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>