SUTRON SDI-12 AquaTemp Submersible Temperature Sensor Instruction Manual
- June 15, 2024
- SUTRON
Table of Contents
SUTRON SDI-12 AquaTemp Submersible Temperature Sensor
Product Information
Specifications
- Confidential – Company Proprietary
Product Usage Instructions
Unpacking and Setup
Before using the product, follow these steps:
- Remove the product from its packaging.
- Check for any visible damage. If damaged, contact customer support.
- Find a suitable location to place the product.
- Ensure the product is connected to a power source.
Powering On the Product
To power on the product, follow these steps:
- Locate the power button on the product.
- Press and hold the power button for 3 seconds.
- The product will start up and the LED indicator will turn on.
Product Configuration
To configure the product, follow these steps:
- Connect the product to your computer using the provided USB cable.
- Install the product configuration software on your computer.
- Launch the configuration software and follow the on-screen instructions.
- Customize the settings according to your preferences.
- Save the configuration and disconnect the product from your computer.
Product Maintenance
To ensure optimal performance, perform regular maintenance on the product:
- Clean the product surface with a soft, dry cloth.
- Avoid using harsh chemicals or abrasive materials.
- Keep the product away from direct sunlight and extreme temperatures.
- Regularly check for software updates and install them as necessary.
troubleshooting
If you encounter any issues with the product, try the following troubleshooting steps:
- Restart the product and see if the issue persists.
- Check the product’s user manual for specific troubleshooting guidelines.
- Contact customer support for further assistance.
Frequently Asked Questions (FAQ)
Q: How do I reset the product to factory settings?
A: To reset the product to factory settings, follow these steps:
- Power off the product.
- Press and hold the reset button for 10 seconds.
- The product will reset and all settings will be restored to default.
Q: Can I use the product with multiple devices?
A: Yes, the product can be used with multiple devices. Simply connect it to each device using the appropriate cables or wireless connections.
Overview
Sutron’s AquaTemp submersible temperature sensor is a rugged SDI-12 sensor designed to measure the temperature of water, soil, and other liquids. The SDI-12 interface, high accuracy, and long-term reliability make it easy to add temperature monitoring to existing stations.
Aqua Temp-x (“” determines cable length)
Applications
- Soil Temperature
- Streams
- Surface Water
- Stilling Wells
- Dams
- Aquaculture Tanks
Features
- SDI-12 Operation (V1.3)
- Tough UV-resistant, watertight polyurethane cable
- Stainless steel body with eyelet for weight or pull strings
- Flex fitting to protect cable
- Wide operating temperature range (-40° to +60°C)
EXCEPTIONAL ACCURACY ‡0.1°C (-5° TO +45°C)
Accuracy Comparison
Specifications
Models & Options
Recommended Accessories
SDI-12 Surge Protection Module (6461-1241) Although the AquaTemp is built with SDI-12 surge protection, Sutron recommends additional security through the SDI-12 Surge Protection Module.
- Multi-stage circuitry: Automatically resets after a surge
- Operating temperature:-40°C to +60°C
- Accepts wire sizes (input/output):26-14 AWG
- Series resistance (Analog 1/0):100 ohms
- Power handling:(8/20 uS) 20 kAmps
- Clamping voltage:36 V
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>