GAS AUDIO POWER MAD M2-34 3.5 Inch Midrange Speakers User Manual
- June 12, 2024
- GAS AUDIO POWER
Table of Contents
GAS AUDIO POWER MAD M2-34 3.5 Inch Midrange Speakers
WE PLAY LOUD!!
We know what you want. You want it LOUD, and that is exactly what we do, what we live for. Vibrations, gut-punches and straight up loud music – that’s what makes us tick. We won’t dress up in fancy words or claim to be something we’re not. We are the NO BULLSH!T car audio brand!
Every single product with the GAS logo on it is born out of passion, the same that has driven us for two generations and that will keep us rolling up to your neighbourhood, winning and pushing the limits for many generations to come!
It’s up to you to choose your own level of loud, and if you don’t like what we
do that’s OK. You are welcome back when you’ve had your first true GAS
experience. We don’t exclude, we don’t judge and we do not make up any excuses
for who we are.
We are GAS and we are proud to be LOUD!
SAFETY
PLAY LOUD & SAFE. Read through this information, follow the instructions and save the manual for future usage and reference.
Make sure to pay attention to the instructions when you see this symbol:
Do not expose the wiring to your new speaker to excessive damp or moisture.
If the speaker’s wiring is exposed it might result in electric failure, shock
or damage to the product. Servicing is required when the product has been
damaged in any way and/or doesn’t operate normally. Refer all servicing to
qualified service personnel only.
Keep the cables inside the vehicle separate from sharp edges or components
that may be affected or take damage. Follow the recommended cable sizes and
always use high quality cables and accessories. Even if you’re eager to put
the speakers to use -take no shortcuts when installing the cables, make sure
that all connectors are protected and secured.
Do not drill any holes without checking what lies beneath, and don’t cut
anything without making sure that no important components risk being damaged.
There is a first time for everything, if you need help – ask a friend or
contact your local GAS AUDIO POWER dealer/installer.
We want you to experience your product’s MAD sound, but we don’t want you to
injure yourself or others. Use common sense, respect high pressure levels and
volume, and follow your local laws and regulations.
UNPACKING
Unboxing your new MAD product is an experience, make sure that the speakers and all the accessories are included in the packaging:
-
Speakers (2pcs)
-
Manual (1 pc)
-
Screws (4pcs)
-
V-clips (4pcs)
DIMENSIONS
| A| B| C| D| E| F| G|
---|---|---|---|---|---|---|---|---
X2-34| Ø 87| Ø 105| 12X5| Ø 60| Ø 78| 42| 46| mm
SPECIFICATIONS
Below you’ll find the specifications that has been checked and tested in our workshop. The specified sensitivity isn’t directly connected with the sound pressure in the vehicle, and shouldn’t be used as the sole indicator for comparison with other speakers.
MAD M2-34
Component| Midrange
Woofer size| 3.5″(87mm)
Nominal impedance| 40hm
Power RMS| sow
Power MAX| 100W
Freq. response| 105-10 000Hz
Sensitivity| 87dB
Woofer cone| IMPP
Woofer basket| Resonance Free Steel
Woofer suspension| NBR Rubber
Woofer magnet| HO Ferrite
Woofer spider| Nomex/Cotton
Vas| 1.3L
Qts| 0.9
Qes| 1.4
Qms| 2.5
Re| 3.20hm
Fs| 110 Hz
FEATURES
The MAD coaxial speakers are made to be LOUD and last for years to come. We want to help you and your vehicle to be as LOUD as possible. We’ve made sure that’s the case by using innovative and groundbreaking techniques that increase durability.
ENDLESS POSSIBILITES
Ready to bring the LOUD? This is the MAO M2-34, a compact and versatile
addition to your car audio setup. With a 3.5 inch midrange size, this speaker
brings a lot of crisp and clear voicing! Whether you want to create a 3-way or
2-way component kit, or simply use it as a standalone addition to your
existing setup, the options are endless. Don’t let any restrictions hold you
back – make your car audio setup LOU Der and better than ever with the MAD
M2-34.
A MAD SPEAKER TO FIT EVERY NEED
There’s nothing better than replacing that old dusty wannabe speaker that’s
been hiding behind your door panel. Did your old speakers break ’cause they
couldn’t handle your level of LOUD? The M2-34 is ready for you. Be proud, be
loud, be MAD!
DESIGNED TO BE DURABLE
Our research department has truly gone MAD! For our MAD S2 subwoofers we
developed a new kind of IMPP cone. We decided that this feature was so good –
we brought it over to the M2 series. This means that the M2 series speakers
are very durable, moist proof and ready to kick some ass!
SWEDISH DESIGN, MAD SENSIBILITIES
The 25mm KSV voice coil is wound with lightweight CCAW (Copper Clad Aluminum
Wire) that creates a dynamic sound. Since the Swedish weather encompasses all
different seasons – the M2-34 is designed to withstand them all. Hot, cold, UV
rays – it doesn’t matter. It’s MAD and it’s made to play LOUD, no matter the
circumstances!
HOW TO INSTALL SPEAKERS
Before installing your brand new speakers, make sure that you have everything
you need. Have the right tools ready and make sure you have the necessary
skills/knowledge to perform the installation properly. Preparation and
knowledge is crucial!
The MAD M2 series uses a single 4 Ohm voice coil. If you want to connect four
or more M2 series speakers, you can vary the impedance by altering the wiring
configuration to use a series or parallel setup. The more the merrier!
Make sure to look through the recommended wiring schematics below and choose
the setup that corresponds with the number of speakers in your sound system.
Take note of the impedance stability of your amplifier. Don’t be afraid to
consult your local GAS AUDIO POWER dealer/installer if you have any questions.
It is important to know the limits of your amplifier. Be sure to connect your
sound system with a suitable impedance to optimize your sound system.
TROUBLESHOOTING
NO POWER/SOUND
Check the speakers to make sure they’re not damaged. If your speakers don’t
get any power, the most common issue is either in the wiring or in the
amplifier. Use a multimeter to measure the amplifier’s voltage on the +12V
terminal and the remote signal terminal. Use a multimeter to make sure that
you have a negative ground connection. Check the built-in fuse (if there’s
one) on the amplifier. If there’s no power coming through – control the fuse
on the power cable. If it’s intact – make a full check of the wiring to ensure
cable integrity.
Check all the speakers connected to your sound system. Check all the speaker cables and all the signal cables. Check your head unit to make sure no settings are limiting the amplifier’s functions or the speakers. When all of the above has been tested/looked over, and all is as it should be but there’s still no sound, consult your local GAS AUDIO POWER dealer/installer.
UNWANTED NOISE
Start by looking over the speakers in the sound system so there is no damage
or connection issue with the wiring. Make sure that your signal cables or
speaker cables aren’t too close to the power cables. Check your amplifier’s
grounding point and make sure that the surface is clean. When all of the above
has been tested/looked over, and the unwanted noise does not vanish, consult
your local GAS AUDIO POWER dealer/installer.
DISTORTION
Start by looking over the speakers in the sound system so there’s no damage or
connection issue with the wiring. Check the speaker cables to make sure that
the polarity isn’t reversed on one channel. Check the settings on the
amplifier, make sure that the gain/level is set according to the amplifier’s
instructions. If your amplifier has a boost function, lower its effect or turn
it off.
WARRANTY & DISPOSAL
This product is covered by warranty, depending on the conditions in the country where it’s sold. If the speakers are returned for service, please include the original dated receipt (or a copy) with the product. Make sure that the speakers are packaged properly and secured, preferably in its original packaging.
The crossed-out wheelie bin symbol means that the product, literature and packaging included must be taken to separate collection at the end of their working life. Don’t dispose of these products as unsorted municipal waste: take them for recycling. For info on your nearest recycling point, check with your local waste authority.
This product has been granted with the CE certification mark to show that the product follows the health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).
GAS Audio Power products comply with the relevant pro Visions of the RoHS Directive for the European Union. In common with all Electrical and Electronic Equipment (EEE) the product shouldn’t be disposed of as household waste. Alternative arrangements may apply in other jurisdictions.
GAS Audio Power is a global partner of the European Mobile Media Association, an organization that focus on promoting the custom made mobile media installations to consumers.
THE GAS WORLD
You’ve entered the world of GAS. We aim to please, and we’ve made sure to have products made for you. No matter what stage of the LOUD addiction you might find yourself in, there is a GAS product to fill your need.
Just starting out? The MAD series is made to play LOUD and to be the express lane to a no bullshit sound system that will make sure everyone can hear you coming!
The MAX series holds products made to deserve the center stage. Powerful, heavy duty and designed to be noticed. We made NO COMPROMISES because we know that you wouldn’t accept it.
The CMP series has been developed for the crucial seconds when the dB-counter starts to tick. All CMP products have hand-picked, high quality, COMPETITION GRADE components and they are specially designed to withstand an awesome amount of power.
THANKS FOR JOINING GAS AUDIO POWER!
GAS AUDIO POWER and SHAKY are registered trademarks by Winn Scandinavia AB and
is protected by relevant laws and jurisdictions such as Copyright and
Trademark laws.
Winn Scandinavia AB I Elementvagen 15, 70227 Orebro, Sweden I
www.winnscandinavia.com
Winn Scandinavia AB reserves for possible typos, factual or numeric errors
that may have been printed on any products, package designs, user manuals
and/or other included accessories.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>