DREAMADE ET1272 Portable Electronic Welder Inverter for Electrode MIG 130 Yellow User Manual

ET1272 Portable Electronic Welder Inverter for Electrode MIG 130 Yellow
User Manual

Check the components

Install the wire

Fix the wire to the feeder

1. Lift the feeder arm
2. Pull down the cover of pressing roller
3. Take wire from wire roller
4. Feed the wire to the feeder manually

Install the wire to the innermost of feeder until the output of the torch end is 10cm!
Check the roller of right size to match the same size feeding wire
0.6mm wire to 0.6mm roller side
0.8-0.9mm wire to 0.8mm roller side

1. Open roller cover to check the roller size
2. Put back the cover and then feed the right size wire
3. Put arm back in the original place

Put on Power

Trigger the torch

References

• Costway - More Than Just Furniture
• Costway - Mehr als einfache Möbel
• Costway - Más Que Mobiliario Con Comodidad
• Costway - Plus que des Meubles
• Costway - Più che semplici mobili
• COSTWAY - Umebluj dom po swojemu

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>