DARMOSHARK K7 PRO Gaming Keyboard User Guide

K7 PRO GAMING KEYBOARO
QUICK START GUIDE

K7 PRO Gaming Keyboard

Size: 385x132x43mm
Weight: 1030g±10g
Button life: 50 million times
Quantity: 98 keys

Specifications

system, BLE supports WIN8 or above system
Interface Type| USB2.0
Drive| Support WIN system

USB wired mode

short press the FN+- key, the switch is successful (The white light in the third position in the upper left corner is always on)
Note: The factory mode is wired

Bluetooth/2.4G mode

about 40 hours (interval use); Turn off the lights, about 150 hours (interval use)
Bluetooth mode switch| Short press FN+E/R/T, the blue light flashes slowly on the button (the blue light is always on in the third position in the upper left corner)
2.4G mode switch| Short press FN+Y, the green light flashes slowly (the third position in the upper left corner is always green)

2.4G pairing

FN+Y| Long press: the green light flashes to match the code under the Y key, and then plug in the receiver. After the pairing is successful, the green light will go out and return to the current light.
---|---

Bluetooth pairing

FN+E/R/T| Long press: the blue light flashes quickly under the E/R/T key to pair the code, search for the Bluetooth device (K7 PRO3.0/5.0), after the pairing is successful, the blue light will go out and return to the current light effect; the keyboard is not successful for 1 minute Then it will automatically turn off sleep, and you need to press any key to wake up and re- enter the pairing.
---|---
Short press: freely switch between Bluetooth three channel devices FN+E/R/T
Note: When the E/R/T three devices flash slowly for a long time, you need to press FN+E/R/T for a long time to pair the code. If the device shows that the Bluetooth pairing is successful but cannot be used, please delete the model from the Bluetooth list of the device and pair again.

Wireless sleep

After Bluetooth/2.4G is connected to the device, it will automatically turn off the backlight after 3 minutes of inactivity, and enter sleep after 10 minutes of inactivity. Click any key to wake up the original state.

Charging instructions

When the data cable is connected to the keyboard, the charging indicator light is steady red,
indicating that it is charging, and it goes out when it is fully charged.(The fourth position indicator
in the upper left corner)

Battery indicator

Short press FN+right Alt to check the battery level, 90% green light, 60% blue light, 30% red light will stay on for 10 seconds and then go out (a slight deviation based on actual usage)
Keyboard indicator function description
N-NumLock indicator
C-CapsLock indicator
W-Mode indicator: white wired, blue bluetooth, green 2.4G
G-Charging indicator: Red is always on and goes out after full charge; Power indicator: Green/blue /red is always on for 10 seconds and then goes out
WIN/MAC system switch (factory default WIN system)

| When the bottom switch is set to WIN mode, the corresponding multimedia keys are only applicable to Win/Android system
---|---
When the bottom switch is set to MAC mode, the corresponding multimedia keys are only applicable to Mac/ios systems

WIN system multimedia control (standard mode cannot be changed)

FN combination keys| Features| FN combination keys| Features
---|---|---|---
FN+F1| Screen brightness-| FN+F2| Screen brightness+
FN+F3| Active window| FN+F4| Desktop display
FN+F5| Resource manager| FN+F6| volumeMute
FN+F7| Volume+| FN+F8| stop
FN+F9| play / Pause| FN+F10| next
FN+F11| previous piece| FN+F12| track

MAC system multimedia control (standard mode cannot be changed)

FN key combination function

FN+ESC| Reset| FN+WIN (not supported by MAC system)| Lock/unlock WIN (white indicator light under button)
---|---|---|---
FN+|| Light Recording| FN+[{| PRINT
FN+]}| PAUSE| FN+;:| HOME
FN+’”| END| FN+>.| MENU (right-click menu))
FN+/?| SCRLK| FN+ALT(right)| Check battery level
FN+DEL| Lighting effect mode
switch (15 types)| FN+PGUP| Lighting effect direction switching (individual mode)
FN+INS| Monochrome switching of lighting effects| FN+PGDN| Lighting effect on/off
FN+ ← →| LFive-level speed adjustment| FN+↑↓| Five levels of brightness adjustment

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
WIN MAC

Custom light recording

FN+U/I/O/P| In any mode, first press FN+U/I/O/P to select, and then press FN+| to perform custom light color recording. At this time, the indicator LED flashes white. Press any button to select 8 colors and none The light is switched in cycles until the color you like, and finally press FN+| to save, and the recording is successful.
---|---

Operator:Motospeed Technology Group Limited
Manufacturer: Mototech Technology Group Limited
Address: Nanpu Road,Shajing, Bao’ an Shenzhen P.r.China
HOTLINE: 4008-860-368
WWW.DARMOSHARK.CN

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>