UTONG HK COMMERCIAL UT2301 Party Pal BT Speaker Instruction Manual
- June 15, 2024
- UTONG HK COMMERCIAL
Table of Contents
UTONG HK COMMERCIAL UT2301 Party Pal BT Speaker
Product Information
Specifications
- Compliance: FCC part 15
- RF Exposure: Meets general requirements
- Usage: Portable exposure condition without restriction
Product Usage Instructions
FCC Statement
This device complies with part 15 of the FCC rules. It is designed to operate under the following conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or Modifications
Any changes or modifications to the device that are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF Exposure
The device has been evaluated and meets the general RF exposure requirements. It can be used in portable exposure conditions without any restrictions.
Frequently Asked Questions (FAQ)
-
Q: What compliance standards does this device meet?
A: This device complies with part 15 of the FCC rules. -
Q: Can I make changes or modifications to the device?
A: No, any changes or modifications not approved by the party responsible for compliance may void your authority to operate the equipment. -
Q: Is there any restriction on using the device in portable exposure conditions?
A: No, the device can be used in portable exposure conditions without any restrictions.
IMPORTANT SAFETY INFORMATION
- Read all instructions before using this product.
- Do not leave it unattended while charging.
- Do not expose to water or moist environments.
- DO not use if the item has been damaged in any way.
- Do not expose to intense heat or cold.
- Do not disassemble or adjust the item in any way.
- Never dispose of batteries in the garbage.
- This is unlawful under state and federal environmental laws and regulations. Always take used batteries to your local battery recycling center.
Specifications
- Input: 5V
- Powered by:300mah rechargeable built-in battery
- Playing time: around 2 hours
- Charging Time: around 1 hour
- Product size: dia8.5*6cm
Bluetooth Connection
Press & hold the ON/OFF button until there is a voice command & LED flashes blue. The device is ready to pair. Make sure the Bluetooth function on your device is ON. Search for & select “PARTY PAL BT SPEAKER”. A voice command will state that the connection is successful.
- Press and hold for Power ON/OFF
- Press and hold for Volume /Short press for Previous Song
- Short press for Play / Pause
- Press and hold for Volume+ /Short press for Next Song
- Press and hold for refuse call [Short press for Answer/End call /Press twice for Redial’s last call
CHARGING
The Speaker includes a built-in rechargeable battery. It is recommended to
charge the battery fully before first use.
Connect the USB cable to a computer or other USB charging port and the Type-C
plug into the charging port of the speaker. The LED indicator turns RED while
charging and turns OFF once charging is completed. This device complies with
part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC ‘D: 2AJ9K-UT2301
- Bluetooth is a registered trademark of Bluetooth SIG, Inc.
- Bluetooth DID : D048522
- Bluetooth QDID: 141904 CB-DOI
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>