make It real 1701-INSNRD-01 Ultimate Bead Studio Instructions

8+
INSTRUCTIONS
1760 BEADS

Go tomakeitrealplay.com for video instructions!

LEGEND

| Scissors
---|---
| Ruler
| Adhesive tape
| Craft glue
| Lat dry
| knot
| Double kno
| Repeat
| Find the center
| You will need:

BRACELET 1

1. Measure and cut 35 cm (13 ¾ in) of elastic cord.
2. Tape one end of the elastic on a flat surface.
3. Thread the beads onto the elastic cord.
4. Make a jeweler’’s knot and add a drop of glue.
   Wait 5 minutes for it to dry![make It real 1701-INSNRD-01 Ultimate Bead Studio

• Drop](https://manuals.plus/wp-content/uploads/2023/12/make-It- real-1701-INSNRD-01-Ultimate-Bead-Studio-Drop.jpg)

  5. Cut the excess elastic cord.

BRACELET 2

1. Measure and cut 1 piece of 50 cm (19 ¾ in) of elastic cord.
2. Leaving 8 cm (3 in), tape one end on a flat surface.
3. Thread 7 beads.
4. To create a daisy thread 4 pink beads and one yellow bead.
5. Thread the elastic cord in the first pink bead again.
6. Thread 2 pink beads.
7. Thread the elastic cord in the fourth pink bead again.
8. Repeat steps 3 to 7 until there are 5 daisies on the bracelet.
9. Make a jewelers Knot and add a drop of que. Wait 5 minutes for it toe dry.
10. Cut the excess elastic cord.
    |
    ---|---

BRACELET 3

1. Measure and cut 2 pieces of 35 cm (13 ¾in) of elastic cord.
2. Tape one end of the elastics on a flat surface.
3. Thread a bead on the left cord.
4. Thread a jump ring on beth elastic cords.
5. Thread a bead on the night cord.
6. Thread a jump ring on both elastic cords.
7. Repeat steps 3 to 6, twenty-four more times.
8. Overlap the ends of each cord. Secure the knot with a drop of Craft que of dear nail polish and cut off the excess lengths of cord after the knot.

BRACELET 4

1. Measure and cut 35 cm (13 ¾ in) of waxed cord.
2. Thread 40 jump rings and center them on the cord.
3. Make a simple Knot on each sides of the jump rings.
4. To close the bracelet, make a knot with the left waxed cord onto the night waxed cord.
5. Make a knot with the right waxed cord onto the left waxed cord.
6. Cut the excess cords.

BRACELET 5

1. Measure and cut 2 pieces of 35 cm (13 ¾ in) of waxed cord.
2. Leaving 12 cm (4 ½ in), tape one end on a flat surface.
3. Measure and cut 70 cm (27 ½ in) of waxed cord.
4. Make square knots for 5 cm (2 in) long. Square knots
5. Add a drop of glue to the knot. Wait 5 minutes for it to dry. Cut the excess cords.
6. Measure and cut 30 cm (12 in) of waxed cord.
7. Make square knots for 1 cm (½in) long.
8. Make a knot at both ends.

NECKLACE

1. Measure and cut 1 m (39 ½ in) of waxed cord.
2. Thread the beads and center them on the cord.
3. Make a simple knoton each sides of the beads.
4. Thread 3 beads. Make a simple knot. Gut the excess cords.

WARNING!
CHOKING HAZARD — small parts. Not suitable for children under 3 years.
STRANGULATION HAZARD — Keep away from young children.

|
---|---

MAKE IT REAL
1700 Reisterstown Rd Ste 211
Pikesville MD 21208 USA 410-995-8685
Jactin House, 24 Hood Street
Ancoats, Manchester, M4 6WX UK
+44 (0) 161 302 4100
MDSS GmbH
Schiffgraben 41, 31075 Hannover, DE
© 2022 MAKE IT REAL, LLC

makeitrealplay.com
Made In Chana

Documents / Resources

| make It real 1701-INSNRD-01 Ultimate Bead Studio [pdf] Instructions
1701-INSNRD-01, 1701-INSNRD-01 Ultimate Bead Studio, Ultimate Bead Studio, Bead Studio, Studio
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>