Timjorman MAL 7447-01 Battery LED Table Lamp Instruction Manual
- June 15, 2024
- Timjorman
Table of Contents
Timjorman MAL 7447-01 Battery LED Table Lamp
Installation and Using Instructions
Safety directions
Please read this information carefully before installing or using this product. Please keep this user manual for further reference.
-
The manufacturer does not accept any responsibility for injuries or damage resulting from improper use of the light.
-
Maintenance of the lights is limited to the surfaces. For electrical safety reasons, this product must not be cleaned with water or other liquids. Use only a dry, lint-free cloth for cleaning.
-
Caution! Risk of electric shock. Before connecting to the mains, always check the entire light for possible damage. Never use the light if you notice any damage.
-
The symbol of the crossed-out garbage can on the product or the packaging means that the product must not be disposed of with ordinary household waste. At the end of its useful life, the product must be returned to a point of acceptance for the recycling of electric and electronic devices. Please ask your local municipality for the point of acceptance.
-
Please make sure that no cables get damaged during the installation work.
-
Place the lamp on horizontal surfaces only.
-
The lights have a protection class rating of “IP44“ and are approved for use in the exterior areas of private households.
-
Do not look directly into the light source (illuminant, LED, etc.).
-
The included or insertable LED light bulb contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
-
This product contains a light source of energy efficiency class “F“, based on the EU regulation 2019/2015.
-
LED color deviation when using different chargers may occur. The light color and luminous strength of the LEDs can also change as a result of life span
level of the lamp. -
The switch “ON/OFF“ switches the light on or off.
-
This article is not suitable for use with dimmable electric circuits. It can be dimmed to “3“ different levels by repeatedly touching the sensor area “A1“.
-
The integrated USB socket does not have a data function and is only provided to connect the device to the power supply.
-
Caution Fabric shades are not weatherproof.
-
Batteries or rechargeable batteries are not permitted in domestic waste. They must be decontaminated according to the regulations of the responsible authorities as hazardous waste. Use the available collection points.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>