EleCcotmrimc Cordless Electric Spin Scrubber User Guide
- June 15, 2024
- EleCcotmrimc
Table of Contents
Common Questions of
Electric Spin Scrubber
Cordless Electric Spin Scrubber
FAQ
The battery cannot charg Q1 The battery cannot charge.
A1 1. Replace the cable or adapter. It is recommended to use the 5V2A adapter to charge, and try to avoid using the USB power supply of the computer; 1. Replace the cable or adapter. It is recommended to use the 5V2A adapter to charge, and try to avoid using the USB power supply of the computer; 2. Water is inevitable during the cleaning process. Please make sure the USB charging port is dry when charging. 2. Water is inevitable during the cleaning process. Please make sure the USB charging port is dry when charging.
The battery died soon after the product was used Q2 The battery died soon after the product was used.
A2 1. When the machine is fully charged, all 5 lights are on. First confirm the state of electric quantity before use; 1. When the machine is fully charged, all 5 lights are on. First confirm the state of electric quantity before use; 2. In addition, if there is too much pressure in the use of the machine, it may be triggered the heavy load protection, restart the machine. 2. In addition, if there is too much pressure in the use of the machine, it may be triggered the heavy load protection, restart the machine
The brush is hard to control, it spins Q3 The brush is hard to control, it spins.
A3 1. In addition to the planting brush, other cleaning clothe are fitted by Velcro. The Velcro effect is not as good as the original one after using it for a long time, so try to fit it well when disassembly and assembly, which can effectively avoid the rotation of the process of throwing out; 1. In addition to the planting brush, other cleaning clothe are fitted by Velcro. The Velcro effect is not as good as the original one after using it for a long time, so try to fit it well when disassembly and assembly, which can effectively avoid the rotation of the process of throwing out; 2. In the process of use, try to make the brush fit with the clean surface, avoid only using the edge of the brush and the clean surface contact. If it's just edge contact, it's harder to control the 2. In the process of use, try to make the brush fit with the clean surface, avoid only using the edge of the brush and the clean surface contact. If it's just edge contact, it's harder to control the brush, and edge rotation can cause the brush to fly.
Installation problem of telescopic rod Q4 Installation problem of telescopic rod.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>