SPACEMAN Meridian Time Modulator User Manual

SPACEMAN Meridian Time Modulator

Product Information

Specifications

• Encompasses short delay time effects such as chorusing, phasing, pitch shifting vibrato, flanging, and comb filtering
• Versatile modulation pedal with a lush tone and practical control scheme
• Designed for ease of use with deep performance functionality
• Produces subtle harmonics and warm analog character
• VOLUME: Controls overall output volume with a maximum boost of 6dB
• REGEN: Dials in negative feedback for resonant flange, phase tones, or metallic, robotic comb-filter sounds
• MIX: Adjusts the balance between dry and wet signals
• RATE: Controls the speed of modulation from extremely slow to extremely fast
• WIDTH: Determines the intensity of LFO modulation
• TIME: Sets the range of delay time that the modulation focuses on
• WAVESHAPE: Offers three LFO wave shapes – Sine, Triangle, and Flux
• EXP Jack: Allows external control of either WIDTH, RATE, or delay time
• Requires 9V DC power with negative center polarity
• Input impedance: 1M ohm
• Maximum current draw: 58mA when engaged
• Limited Lifetime Warranty

Product Usage Instructions

1. VOLUME Control
   The VOLUME control adjusts the overall output volume. Turn it clockwise to increase the volume and counter-clockwise to decrease it. The maximum boost available is 6dB.

2. REGEN Control
   The REGEN control dials in negative feedback, allowing for resonant flange, phase tones, or metallic, robotic comb-filter sounds. Experiment with different settings to achieve the desired effect.

3. MIX Control
   The MIX control determines the balance between the dry and wet signals. Turn it counter-clockwise for more dry signal and clockwise for more effected signal. When set fully wet, you can experience mind-bending pitch vibrato.

4. RATE Control
   The RATE control adjusts the speed of modulation. It has a wide range, allowing for both extremely slow (0.12Hz) and extremely fast (15.5Hz) modulation. Experiment with different settings to find your desired modulation speed.

5. WIDTH Control
   The WIDTH control determines the intensity of LFO modulation. At minimum, the LFO modulation is disabled, and you enter COMB filter mode. Adjust the WIDTH control to achieve the desired level of modulation intensity.

6. TIME Control
   The TIME control sets the delay time range that the modulation will be focused on. The shortest time is 800us (0.8ms), while the longest delay time is 50ms. Adjust the TIME control according to your preference.

7. WAVESHAPE Control
   The WAVESHAPE control offers three LFO wave shapes: Sine, Triangle, and Flux. Choose the desired wave shape to modulate the delay line.

8. EXP Jack
   The EXP Jack allows external control of either WIDTH, RATE, or delay time. An internal slide switch can be used to select which parameter is routed to the EXP Jack. If the switch is in the upward position, WIDTH can be controlled via EXP/CV. If the switch is in the downward position, RATE or delay time can be controlled via EXP/CV.

9. Power Requirements
   The Meridian requires external power of 9V DC with negative center polarity. Use a 2.1mm jack to connect the power supply. The pedal has a high input impedance of 1M ohm and a maximum current draw of 58mA when the effect is engaged. If you are unsure about your DC adapter, please contact Spaceman for assistance.

Frequently Asked Questions (FAQ)

• Q: Where can I find user guides and recommended settings?
  A: You can find user guides and recommended settings for the Meridian at spacemaneffects.com/meridian .

• Q: What is the warranty for Spaceman pedals?
  A: All Spaceman pedals are covered by a Limited Lifetime Warranty.

Q: Can you provide some suggested settings for the Meridian?
A: Here are some suggested settings to get you started:

• Warm Chorus: A bread and butter chorus with a warm vintage feel.
• Vibrato: Moderate speed pitch vibrato, adjust the delay time to taste.
• Phasey Leslie: Shimmering pulsations of silvery undulation.
• Slow Flange: Smooth modulation as silk, slick as ice.
• Seasick Bunnyhop: A subtle stagger, just below the surface.
• The Dali Drip: Psychedelic liquid corruption.

Instructions

Encompassing the gamut of short delay time effects, from chorusing, phasing, pitch shifting vibrato, to flanging, and comb filtering, the Meridian is a versatile modulation pedal with a lovely lush tone and practical control scheme. Particular attention is paid to ease of use while incorporating deep yet convenient performance functionality. Subtle slithering harmonics shimmer and sparkle in synchronized unison to your playing, enveloping your tone with warm analog character.

• VOLUME – Controls the overall output volume. Maximum of 6dB boost available.
• REGEN – Dials in negative feedback, allowing for the over-the-top resonant flange and phase tones or metallic, robotic comb-filter sounds.
• MIX – Goes from 100% dry to 100% wet. Counter-clockwise for more dry, clockwise for more effected signal. Experience mind-bending pitch vibrato when set fully wet.
• RATE – Wide range speed control, which allows for both extremely slow – 0.12Hz (8 second sweep time) and extremely fast – 15.5Hz (65ms sweep time) modulation.
• WIDTH – How intense the LFO modulation is. At minimum, LFO modulation is disabled and you enter COMB filter mode.
• TIME – Sets the delay time range that the modulation will be focused on. Shortest time is 800us(0.8ms), while the longest delay time is 50ms.
• WAVESHAPE – Three LFO wave shapes are available: Sine, Triangle, and  Flux. The LFO is bypassed and the RATE control will sweep the delay line manually, when WIDTH is set to minimum.
• EXP jack – Sweep the RATE or WIDTH directly from zero up to the position of the respective knobs using any standard expression pedal or 0-5V CV
• via ¼” TRS cable.
  • An internal slide switch allows you to choose which parameter is routed to the EXP Jack.
  • An internal slide switch allows you to choose which parameter is routed to the EXP Jack.
  • With the internal switch in the upward position the WIDTH may be controlled via EXP/CV.
  • With the internal switch in the downward position the RATE may be controlled via EXP/CV.
  • With the internal switch in the downward position it is also possible to control delay time via EXP/CV. Set the WIDTH control to minimum, the RATE control set to
  • maximum. This allows you to sweep the delay time from zero up to the position of the TIME control. Experimenting with the RATE control will fine tune the range available.
• The Meridian requires external power of 9V DC, negative center via the  2.1mm jack. The Meridian has a high 1M ohm input impedance and a maximum current draw of 58mA when the effect is engaged. Please contact Spaceman if you are unsure about your DC adapter.
• For user guides and recommended settings visit spacemaneffects.com/meridian All Spaceman pedals are covered by a Limited Lifetime Warranty.

Suggested Settings

On the following pages you’ll find a collection of carefully crafted settings to get you started on your journey.

• Warm Chorus
  Bread and butter chorus with a warm vintage feel.

• Vibrato
  Moderate speed pitch vibrato, move the delay time around to taste.

• Phasey Leslie
  Shimmering pulsations of silvery undulation.

• Slow Flange
  Smooth as silk, slick as ice.

• Seasick Bunnyhop
  A subtle stagger, just below the surface.

• The Dali Drip
  Psychedelic liquid corruption.

• Clanker
  For extra fun plug in an Expression pedal and sweep the delay time (internal EXP switch downwards)

Technical Specifications

Please contact Spaceman if you are unsure about your DC adapter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>