elica ELI136S2 Island Mount Range Hood Instruction Manual
- June 15, 2024
- ELICA
Table of Contents
ISLAND FILTER KIT
KIT0192761
IMPORTANT SAFETY INSTRUCTIONS
APPROVED FOR RESIDENTIAL APPLIANCES FOR RESIDENTIAL USE ONLY
READ AND SAVE THESE INSTRUCTIONS PLEASE READ THE ENTIRE INSTALLATION GUIDE
BEFORE PROCEEDING.
INSTALLATION MUST COMPLY WITH ALL LOCAL CODES.
IMPORTANT: Save these instructions for the local electrical inspectors
use.
INSTALLER: Please leave these instructions with this unit for the owner.
OWNER: Please retain these instructions for future reference.
WARNING: Turn off power circuit at service panel and lock out panel
before installing this kit to the appliance. Installation must comply with all
local codes.
CAUTION: Remove the carton carefully. Wear gloves to protect against
sharp edges.
-
Remove the duct cover (fig.1)
(See hood installation manual). -
Depending on the height of your ducts, determine the desired height for the installation of the filter connection (fig.2).
-
Remove the screws from the flange on which the union will be installed (fig.3).
-
Assemble the union to the flange using the 2 screws of 4 x 8 mm (fig.4).
-
Once the pieces are joined, place them on the duct cover supports with the assembly screws (fig. 6).
-
Put the duct covers back in place (fig. 8).
FOG0193774
Documents / Resources
|
elica ELI136S2 Island Mount Range
Hood
[pdf] Instruction Manual
ELI136S2 Island Mount Range Hood, ELI136S2, Island Mount Range Hood, Mount
Range Hood, Range Hood, Hood
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>