RADON RN-PRO200 Intelligent Monitor Instruction Manual

RADON RN-PRO200 Intelligent Monitor

Thank you very much for using this product. In order to enjoy the service of this product, please keep and read the instruction carefully. If you have any problems for this product, please feel free to contact us contact@lifebasis.com

Product Description

Our innovative radon monitor, which integrates the latest high-precision radon sensor, combined with a friendly and stable WIFIAPP, provides a simple, fast, highly accurate and affordable solution for continuous radon monitoring.

Placement Guidelines

1. Make sure it’s at the correct height. Place our radon monitor at least 20inches (50cm) above the floor.
2. Don’t place radon monitor close to open windows or vents, and keep it away from high heat and high humidity.
3. Find a place with good Wi-Fi signal. Our radon monitor use a Wi-Fi connection to the internet and send information to your smartphone APP.
4. Vibration can cause the unit to pause the test and produce a warning sound;
5. Re-pairing is required if the network is changed;
6. A device can only be paired with one smartphone and one router at the same time; a smart phone can be paired with multiple devices (up to 200 devices) .

Technical Specifications

How to Connect the Device and Use it ?

1. Step 1.Connect the power cable into the device and plug the power adapter into an AC power supply.

2. Step 2.Download and install the “Tuya” Smart App through the Google Play Store or Apple App Store. Or to scan QR code ( Picture 1) to download the “Tuya” APP.

3. Step 3.Then register an account with mobile phone number or email and login it.

4. Step 4. Press and hold the “reset” button of the device for more than 5s, the led indicator of device flash quickly in red with a Audible “Di”, then device start bluetooth network distribution status.
   NOTE:

5. It is necessary to turn on the Bluetooth function on your mobile phone;

6. Not compatible with 5G WIFI;

7. Step 5. Click on the “Add device” button or the upper right corner “+” icon, add the device.

8. Step 6. At this time, the connection box will pop up, click “Go to add” or “Add” to start pairing.

9. Step 7. Enter Wi-Fi name and password for your device to connect to Wi-Fi.

10. Step 8. Enter the device page (picture 1). Click the device icon, you can jump to the data graph (picture 2); Click the data graph, you can jump to the data logger (picture 3).

Setting Alarm Level Threshold
You can set the alarm level threshold freely as following 2 Ways of Setting Up.

Setting 1:

Setting 2:

Radon Data Log, And You Can Sharing With Others
Keep track of hourly radon level by time and date of measurement. Click on the “Sharing” icon of the upper right (Picture 1). Then enter the Email address (Picture 2), you will share the radon date log to this email (please download email attachment to see graph).

Maintenance

1. About the resetting WiFi
   Press and hold the picture icon to enter the management interface, select the device you need to reset WiFi, click “Remove Device” and then re-enter the pairing the status after removing the device.

2. Reset existing data
   To erase all data on your account, you need to remove your device and add again.

3. Power Off
   To switch off the radon monitor, please remove the power cable from the back side.

Led Light Color Guide

Package Including

• 1 × Radon Monitor
• 1 x Power Adapter
• 1 × Product Instruction

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 ofthe FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correctthe interference by one or more ofthe following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 ofthe FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure con dition without restriction.

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>