DC Sports SCS7048 Single Canister Catback Exhaust Instruction Manual
- June 15, 2024
- DC Sports
Table of Contents
DC Sports SCS7048 Single Canister Catback Exhaust
Product Information
Specifications
- Brand : DC Sports
- Model : SCS7048 Single Canister Catback
- Compatible Vehicle : 2012-2015 Honda Civic Si 4dr
- Manufacturer : DC Sports
- Address : 524 Highlandia Dr Baton Rouge LA 70810
- Contact : T. 225-300-6566
- Website : www.dcsports.com
Warranty
This product comes with a limited 1-year warranty provided by DC Sports.
The warranty covers exhaust systems due to poor workmanship. Normal wear and
tear damages caused by misuse or abuse are not covered. To claim the warranty,
you need to be the original owner of the exhaust system and provide proof of
purchase. DC Sports reserves the right to void the warranty if the required
information is not provided. Please note that the warranty does not cover any
costs associated with installation or removal of the product.
Caution
DC Sports exhaust systems are designed to be used with all OEM equipment.
It is important to note that using additional aftermarket components such as
downpipes, cat deletes, test pipes, etc., may cause sound, performance,
fitment issues, or damage. DC Sports will not be held liable for any
complications arising from the use of such components.
Parts List
Quantity | Part Number | Part Description |
---|---|---|
1 | SCS7048 | Single Canister Catback Exhaust (3 pieces) |
2 | DCECL-250 | 2.5 Exhaust Clamp |
1 | RM-CB85 | 2.5 Three Bolt Gasket (Honda) |
3 | RHBA-M10x1.25×30 | M10x1.25×30 bolts |
3 | RHNA-M10x1.25 | M10x1.25 nuts |
1 | DCDECAL | DC Sports Decals (two pieces) |
1 | DC-LPFRAME | DC Sports License Plate Frame |
Product Usage Instructions
Tools Required
- 3/8 Socket wrench
- 14mm Socket
- 13mm Socket
- 12mm Socket
- Exhaust hanger removal Tool
Removal of Stock Exhaust and Installation of Exhaust System
- Utilize a flat work area, preferably on concrete.
- Jack up the car and support it on jack stands under the frame support points. Refer to your owner’s manual for the correct support points. Do not use the jack to support the car while working underneath.
- Allow the engine to cool for at least an hour before beginning the installation for safety reasons.
- Make sure all hardware is present before installation. Refer to the parts list provided.
- Using the appropriate tools, remove the stock exhaust system.
- Install the DC Sports Single Canister Cat back Exhaust system by following the provided instructions or consulting a reputable performance shop or licensed mechanic if unsure about the installation process.
- Ensure that all clamps are properly tightened. Do not use an impact on clamps.
- If the muffler is not in the desired location, loosen the clamps, adjust as needed, and retighten the rear clamp.
- Double-check all work to ensure proper installation.
- Wipe the exhaust clear of all fingerprints, oil, dirt, and debris before starting up.
- After approximately 500 miles (800km), re-check the exhaust system bolts and nuts and tighten as needed.
Thank You
Thank you for choosing DC Sports. If you have any further questions or need
assistance, please contact us using the provided contact information.
FAQ
-
Q: Can I install the DC Sports exhaust system myself?
A: While it is possible to install the exhaust system yourself, we recommend consulting a reputable performance shop or licensed mechanic if you are unsure about the installation process. -
Q: What should I do if my exhaust system needs warranty service?
A: If you believe your exhaust system requires warranty service, please contact us to obtain an RMA (Return Merchandise Authorization) number. Ship the product prepaid to DC Sports with the RMA number clearly marked on the box or package. Failure to include the RMA number may result in refusal of the warranty claim.
DC Sports
524 Highlandia Dr Baton Rouge LA 70810 T.
225-300-6566
www.dcsports.com
SCS7048
Single Canister Catback
2012-2015 Honda Civic Si 4dr.
- READ ALL INSTRUCTION THROUGHLY BEFORE BEGINNING INSTALLATION. FAILURE TO DO SO MAY RESULT IN COSTLY ENGINE AND/OR SYSTEM DAMAGE
- IF UNSURE ABOUT EXHAUST SYSTEM INSTALLATION PLEASE HAVE A REPUTABLE PERFORMANCE SHOP OR A LICENCED MECHANIC INSTALL THIS SYSTEM
- FOR YOUR SAFETY, ALLOW ENGINE TO COOL FOR AT LEAST AN HOUR BEFORE BEGINNING INSTALLATION
- PLEASE CHECK AND MAKE SURE ALL HARDWARE IS PRESENT BEFORE INSTALLATION. PARTS LIST ON LAST PAGE
TOOLS REQUIRERD
- 3/8 Socket wrench, 14mm Socket, 13mm socket, 12 mm Socket,
- Exhaust hanger removal Tool
REMOVAL OF STOCK EXHUAST AND INSTALLATION OF EXHAUST SYSTEM
- Utilizing a flat work area (preferably on concrete), jack up the car and support the car on jack stands under the frame support points. (Refer to your owner’s manual) DO NOT USE THE JACK TO SUPPORT THE CAR WHILE WORKING UNDERNEATH
- Remove three (3) M10 nuts securing the OEM piping to the catalytic converter
- Remove two (2) M8 spring bolts securing muffler to piping.
- Using an exhaust hanger removal tool dislodge piping from rubber exhaust hangers. Remove piping.
- Using an exhaust hanger removal tool dislodge OEM muffler from hangers and remove muffler.
- Remove OEM crush ring from the back of the catalytic converter and replace it with gasket RM-CB85.
- Install SCS7048 front piping onto catalytic converted using provided hardware and gaskets.
- Lubricate OEM rubber hangers and reinstall them onto the DC Sports Exhaust System.
- Install clamps, remaining piping and SCS7048 muffler. DO NOT TIGHTEN CLAMPS
- Position piping and muffler into place. Make sure piping does not contact heatshields or chassis. Check muffler location, once everything is in the desired location, tighten all clamps. DO NOT USE AN IMPACT ON CLAMPS
- If muffler is not in desired location, lessen clamps, adjust as needed and retighten rear clamp.
- DOUBLE CHECK ALL WORK
- Be sure to wipe exhaust clear of all fingerprints, oil, dirt and debris before starting up.
- After approximately 500 miles (800km) re-check the exhaust system bolts and nuts and tighten as needed.
LIMITED 1 YEAR WARRANTY
- DC Sports only warranty’s exhaust systems due to poor workmanship. We do not cover normal wear and tear damages due to misuse or abuse.
- Warranty covers the original owner of exhaust system by having proof of purchase.
- We have the right to void all warranty if you cannot provide the information needed by DC Sports.
- DC Sports does not cover any cost for installation or removal of products.
CAUTION
DC Sports exhaust systems are designed to be used with all OEM equipment. DC
Sports will not be held liable for sound, performance, fitment issues, damaged
or any other complications caused by using additional aftermarket components
such as downpipes, cat deletes, test pipes etc.
WARRANTY CLAIMS
- All warranty claims must be shipped prepaid by the customer to DC Sports.
- Warranty claims must have an RMA (Return Merchandise Authorization) number on the box or package will be refused and sent back to the shipper.
PARTS LIST
Quantity | Part Number | Part Description |
---|---|---|
1 | SCS7048 | SCS7048 Singe Canister Catback Exhaust (3 pieces) |
2 | DCECL-250 | 2.5” Exhaust Clamp |
1 | RM-CB85 | 2.5” Three Bolt Gasket (Honda) |
3 | RHBA-M10x1.25×30 | M10x1.25×30 bolts |
3 | RHNA-M10x1.25 | M10x1.25 nuts |
1 | DCDECAL | DC Sports Decals (two pieces) |
1 | DC-LPFRAME | DC Sports License Plate Frame |
THANK YOU FOR CHOOSING DC SPORTS
Documents / Resources
| DC
Sports SCS7048 Single Canister Catback
Exhaust
[pdf] Instruction Manual
SCS7048 Single Canister Catback Exhaust, SCS7048, Single Canister Catback
Exhaust, Canister Catback Exhaust, Catback Exhaust, Exhaust
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>