WEN 56235i 2350-Watt Portable Inverter Generator Instruction Manual

May 16, 2024
WEN

WEN-logo

WEN 56235i 2350-Watt Portable Inverter Generator

WEN-56235i-2350-Watt-Portable-Inverter-Generator-product-
image

Specifications

  • Model Number: 56235i
  • Surge (Starting) Wattage: 2350 Watts
  • Rated (Running) Wattage: 1900 Watts
  • Rated Voltage: AC: 120V, DC: 12V (Cigarette Plug), 5V
  • Rated Amperage: AC: 15.8A, DC: 8.3A (Cigarette Plug), 2.1A/1A (USB)
  • Phase: Single
  • Frequency: 60Hz
  • Product Weight: 39 lbs
  • Product Dimensions: 17.3 x 11.5 x 17.7 inches

Introduction
Thank you for purchasing the WEN 2350-Watt Inverter Generator. The serial number can be found on the specifications label, as indicated in the illustration below. Please record the generator information in the spaces provided below:

  • Generator Model Number: 56235i
  • Date of Purchase: __
  • Purchased From: ___
  • Serial Number: _____

Safety
Safety Information

  • Pay close attention to the rules for safe operation, warnings, and cautions.
  • Properly care for your tool to ensure safe and reliable service.

Generator Safety Warnings

  • Ensure proper ventilation when operating the generator.
  • Never operate the generator in an enclosed or partially enclosed area.
  • Keep flammable materials away from the generator.
  • Do not touch hot surfaces of the generator.

Before Operating
Unpacking & Packing List

  • Inspect the contents of the package and ensure all items are included.
  • If any parts are missing or damaged, contact customer support.

Know Your Inverter Generator

  • Familiarize yourself with the different components of the generator.
  • Refer to the instruction manual for detailed information on each component.

Preparation

  • Check the fuel and oil levels before starting the generator.
  • Ensure the generator is placed on a stable and level surface.
  • Connect any necessary accessories, such as a weatherproof cover or parallel connection kit.

Operation & Maintenance
To purchase accessories for your tool, visit WENPRODUCTS.COM

  • Magnetic Oil Dipstick (Model No. 55201)
  • Weatherproof Generator Cover (Model No. 56200iC)
  • WEN Parallel Connection Kit
  • High-Altitude Kit (Part No. 56202i-HA36 & 56202i-HA69)

FAQ

  • Q: Where can I find replacement parts and updated instruction manuals?
    A: You can visit WENPRODUCTS.COM for replacement parts and the most up-to-date instruction manuals.

  • Q: How do I contact customer support?
    A: For product questions or technical support, you can contact us at 1-800-232-1195 (M-F 8AM-5PM CST) or email us at TECHSUPPORT@WENPRODUCTS.COM .

2350W INVERTER GENERATOR

NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us

IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.

  • For replacement parts and the most up-to-date instruction manuals, visit WENPRODUCTS.COM
  • To purchase accessories for your tool, visit WENPRODUCTS.COM
  • Magnetic Oil Dipstick (Model No. 55201) WEN Parallel Connection Kit
  • Weatherproof Generator Cover (Model No. 56200iC) High-Altitude Kit (Part No. 56202i-HA36 & 56202i-HA69)

SPECIFICATIONS

GENERATOR

Model Number 56235i
Surge (Starting) Wattage 2350 Watts
Rated (Running) Wattage 1900 Watts
Rated Voltage AC: 120V, DC: 12V (Cigarette Plug), 5V
Rated Amperage AC: 15.8A, DC: 8.3A (Cigarette Plug), 2.1A/1A (USB)
Phase Single
Frequency 60Hz
Product Weight 39 lbs
Product Dimensions 17.3″ x 11.5″ x 17.7″

ENGINE

Engine Type 4 stroke, OHV, single cylinder with forced air cooling system
Engine Displacement 79cc
Engine Speed 4800 RPM
Fuel Tank Capacity 1.06 Gallons (4 L)
Oil Capacity 17.1 fl. oz. (0.5 L)
Half-Load Run Time 5.7 Hours
Lubrication System Splash Lubrication
Spark Plug Type Torch E5T (NGK BP5H)
Spark Plug Gap 0.6 mm – 0.8 mm (0.02 in. – 0.03 in.)
Spark Plug Torque 11.1 – 14.7 ft-lbs (15 – 20 Nm)

INTRODUCTION

Thanks for purchasing the WEN 2350-Watt Inverter Generator. Refer to the illustration below for the location of the serial number on the specifications label. Record the generator information in the spaces provided below. If assistance for information or service is required, please contact customer service by calling 1-800-232-1195, M-F 8-5 CST; you will be asked to provide the following generator information when calling.

Generator Model Number: 56235i

  • Date of Purchase: __
  • Purchased From: ___
  • Serial Number: ____

WEN-56235i-2350-Watt-Portable-Inverter-Generator-01
\(1\) SERVICE RECORD
Record the service dates of your generator in the chart below. Please perform maintenance checks and operations according to the “Maintenance” section of the manual.

Service Record| Date| Date| Date| Date| Date| Date
---|---|---|---|---|---|---
Change Oil| | | | | |
Change Spark Plug| | | | | |
Clean Fuel Tank| | | | | |
Clean Air Cleaner| | | | | |
Clean Spark Arrestor| | | | | |

TO MAXIMIZE THE LIFESPAN OF YOUR GENERATOR: We recommend running your generator at least once a month for 20 to 30 minutes. Start the generator according to the instructions and plug a small load in to make sure the outlet is producing electricity.

SAFETY INFORMATION

WARNING! Before operating the generator, make sure to read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire or serious injury.

SAFETY INTRODUCTION

  • Safety is a combination of common sense, staying alert, and knowing how your tool works. This manual contains important information regarding the generator’s potential safety concerns, as well as preparation, operation, and maintenance instructions. Before operating this generator, be sure to read and observe all warnings and instructions both on the generator labels and in this instruction manual. Failure to follow all instructions listed below may result in personal injury.
  • NOTE: The following safety information is not meant to cover all possible conditions and situations that may occur. WEN reserves the right to change this product and specifications at any time without prior notice.
  • At WEN, we are continuously improving our products. If you find that your tool does not exactly match this manual, please visit wenproducts.com for the most up-to-date manual or contact customer service at 1-800-232-1195, M-F 8-5 CST.
  • Keep this manual available to all users during the entire life of the tool and review it frequently to maximize safety for both yourself and others.

SAVE THESE SAFETY INSTRUCTIONS.

SAFETY SYMBOLS

The purpose of following safety symbols is to attract your attention to possible dangers. The safety symbols, and their explanations, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.

  • DANGER: indicates a hazard, which, if not avoided, will result in death or serious injury.
  • WARNING: indicates a hazard, which, if not avoided, could result in death or serious injury.
  • CAUTION: indicates a hazard, which, if not avoided, might result in minor or moderate injury.
  • CAUTION! when used without the alert symbol, indicates a situation that could result in damage to the machine.

NOTICE REGARDING EMISSIONS
Engines that are certified to comply with U.S. EPA emission regulations for SORE (Small Off Road Equipment), are certified to operate on regular unleaded gasoline, and may include the following emission control systems: (EM) Engine Modifications and (TWC) Three-Way Catalyst (if so equipped).

QUESTIONS? PROBLEMS?
In order to answer questions and solve problems in the most efficient and speedy manner, contact customer service at 1-800-232-1195, M-F 8-5 CST or email techsupport@wenproducts.com .

GENERATOR SAFETY WARNINGS

DANGER! CARBON MONOXIDE

  • Using a generator indoors CAN KILL YOU IN MINUTES. Generator exhaust contains carbon monoxide (CO). This is a poison gas you cannot see or smell. If you can smell the generator exhaust, you are breathing CO. But even if you cannot smell the exhaust, you could be breathing CO.
  • NEVER use a generator inside homes, garages, crawl spaces, or other partially enclosed areas. Deadly levels of carbon monoxide can build up in these areas. Using a fan or opening windows and doors does NOT supply enough fresh air. ONLY use a generator outside and far away from windows, doors, and vents. These openings can pull in generator exhaust.
  • Even if you use a generator correctly, CO may leak into the home. ALWAYS use a battery-powered or battery-backup CO alarm in the home. If you start to feel sick, dizzy, or weak after the generator has been running, move to fresh air RIGHT AWAY. See a doctor. You may have carbon monoxide poisoning.

WARNING! RISK OF EXPLOSION.

HIGHLY FLAMMABLE:
This generator may emit highly flammable and explosive gasoline vapors, which can cause severe burns or even death, if ignited. A nearby open flame can lead to explosion even if not directly in contact with gasoline.

  • Do not operate near open flame, heat, or any other ignition source. Do not smoke near the generator.
  • Always operate on a firm, level surface.
  • Always turn generator off before refueling. Allow generator to cool for at least 2 minutes before removing fuel cap. Loosen cap slowly to relieve pressure in tank.
  • Do not overfill fuel tank. Gasoline may expand during operation. Do not fill to the top of the tank. Allow for expansion. Always check for spilled fuel before operating.
  • If fuel spills, move the generator at least 30 feet away from the spill and wipe clean any spilled fuel before starting the engine.
  • Empty fuel tank before storing or transporting the generator.

WARNING! If this generator is used as a supply for a building’s wiring system, the generator must be in-stalled by a qualified electrician and connected to a transfer switch as a separately derived system in accordance with all applicable laws and electrical codes and the National Electrical Code, NFPA 70. The generator shall be connected to a transfer switch that switches all conductors excluding the equipment grounding conductor. The frame of the generator shall be connected to an approved grounding electrode.

CALIFORNIA PROPOSITION   65 WARNING: This product contains chemicals and produces exhaust known to the State of California to cause cancer, birth defects and other reproductive harm. For more information, visit www.P65Warnings.ca.gov

GENERATOR SAFETY WARNINGS
WARNING! Do not let comfort or familiarity with the product replace strict adherence to product safety rules. Failure to follow the safety instructions may result in serious personal injury.

OPERATING ENVIRONMENT

  1. Using a generator indoors can kill you in minutes. Only use a generator outside and far away from windows, doors and vents.
  2. Do not smoke near the generator.
  3. Do not operate near open flame, heat, or flammable materials. This generator may emit highly flammable and explosive gasoline vapors, which can cause severe burns or even death if ignited. A nearby open flame can lead to an explosion even if it isn’t directly in contact with gasoline.
  4. Do not expose the generator to rainy or wet conditions; doing so significantly increases the risk of electrical shock. Never handle the generator, electronic devices, or any cord while standing in water, while bare-foot, or when hands or feet are wet.
  5. Always operate the generator on a dry, firm, level surface.
  6. The generator should have at least 5 feet of clearance from buildings or other equipment during operation.
  7. Do not allow children or non-qualified persons to operate the generator.

GENERATOR PREPARATION

  1. Always ground the generator before using it to maximize safety (see “Ground the Generator” section).
  2. Do not overfill fuel tank, as gasoline may expand during operation. Do not fill to the very top of the tank. Leave room for gasoline expansion. Always check for spilled fuel before operating.
  3. If any part of the generator, electrical device or power cord is broken, damaged, or defective, make sure it is repaired or replaced before operation. Service should only be performed by a qualified technician. Do not use receptacles or cords that show signs of damage, such as broken or cracked insulation.
  4. Use a ground fault circuit interrupter (GFCI) in highly conductive areas such as metal decking or steel work. Extension cords with in-line GFCIs are recommended for these operations to maximize safety.
  5. If connecting the generator to a building’s electrical system for standby power, you MUST consult a qualified electrician and install a transfer switch. Such connections must comply with local electrical laws and codes. Failure to comply can create a back-feed, which may result in serious injury or death to utility workers.
  6. Never modify the generator in any way. Modifying or using the machine for any other purpose for which it is not designed may result in serious injuries, machine damage and voiding of the warranty.

GENERATOR OPERATION

  1. Only use the generator for its intended purposes. Modifying or using the generator for operations for which it was not designed may cause hazards and personal injury.
  2. Do not touch bare wires or receptacles (outlets).
  3. Do not exceed the wattage capacity of the generator by plugging in more electrical devices than the unit can handle. This could damage the generator and/or connected electrical devices. Check the operating volt-age and frequency requirements of all electrical devices prior to plugging them into the generator.
  4. WARNING! Do not let comfort or familiarity with the product replace strict adherence to product safety rules. Failure to follow the safety instructions may result in serious personal injury.
  5. TO MAXIMIZE THE LIFESPAN OF YOUR GENERATOR : We recommend running your generator at least once a month for 20 to 30 minutes. Start the generator according to the instructions and plug a small load in to make sure the outlet is producing electricity. If you do not run it often, it will greatly shorten the generator’s lifespan and void the warranty.
  6. Allow generator to run for several minutes before connecting electrical devices. Do not start or stop engine with electrical devices plugged in to the receptacles. Failure to do so could damage the generator and/or connected electrical devices.
  7. Do not turn on electrical devices until after they are connected to the generator.
  8. Generators vibrate in normal use. During and after the use of the generator, inspect both the generator as well as extension and power supply cords for damage resulting from vibration.
  9. Do not touch hot parts. This generator produces heat when running. Temperatures near exhaust can exceed 150ºF (65ºC). Allow generator to cool down after use be-fore touching engine or areas of the generator that be-come hot during use.
  10. Turn off all connected electrical devices before stop-ping the generator.
  11. Always turn generator off before refueling. Allow generator to cool for at least 2 minutes before removing fuel cap. Loosen cap slowly to relieve pressure in tank.
  12. Turn the engine switch to “OFF” position when the engine is not running.
  13. Empty fuel tank before storing or transporting the generator. Do not store generator or gasoline near furnaces, water heaters, or any other appliances that pro-duce heat or have automatic ignitions. Store the genera-tor and fuel away from sparks, open flames, pilot lights, heat and other sources of ignition.
  14. Always wash hands after handling generator.

CAUTION: Misuse of this generator can damage it or shorten its lifespan.

WARRANTY STATEMENT

WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality.

LIMITED WARRANTY OF WEN PRODUCTS FOR HOME USE

  • GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN consumer power tools will be free from defects in material or workmanship during personal use for a period of two (2) years from date fissional or commercial use. Purchaser has 30 days from the date of purchase to report missing or damaged parts.

  • SELLER’S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this Limited Warranty and, to the extent per-mitted by law, any warranty or condition implied by law, shall be the replacement of parts, without charge, which are defective in material or workmanship and which have not been subjected to misuse, alteration, careless handling, misrepair, abuse, neglect, normal wear and tear, improper maintenance, improper storage, incorrect lubricants/fuels, or other conditions adversely affecting the Product or the component of the Product, whether by accident or intentionally, by persons other than Seller. To make a claim under this Limited Warranty, you must make sure to keep

  • -chase. Place of Purchase must be a direct vendor of Great Lakes Technologies, LLC. Purchasing through third party vendors, including but not limited to garage sales, pawn shops, resale shops, or any other secondhand merchant, voids the warranty included with this product. Contact techsupport@wenproducts.com or 1-800-232-1195 with the following information to make arrangements: your shipping address, phone number, serial number, required part numbers, and proof of purchase. Damaged or defective parts and products may need to be sent to WEN before the replacements can be shipped out.

  • -turning a product for warranty service, the shipping charges must be prepaid by the purchaser. The product must be shipped in its original container (or an equivalent), properly packed to withstand the hazards of shipment. The product must be fully insured with a copy of the proof of purchase enclosed. There must also be a description of the
    will be returned and shipped back to the purchaser at no charge for addresses within the contiguous United States.

  • THIS LIMITED WARRANTY DOES NOT APPLY TO ITEMS THAT WEAR OUT FROM REGULAR USAGE OVER TIME, INCLUDING FILTERS, SPARK PLUGS, VOLTAGE REGULATORS, BRUSHES, GASKETS, O-RINGS, WHEEL KITS, BAT-TERIES, RECOIL STARTERS, HIGH PRESSURE HOSES, SPRAY GUNS, ETC. ANY IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO TWO (2) YEARS FROM DATE OF PURCHASE. SOME STATES IN THE U.S. AND SOME CANADIAN PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

  • IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF PROFITS) ARISING FROM THE SALE OR USE OF THIS PRODUCT. SOME STATES IN THE U.S. AND SOME CANADIAN PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF IN-CIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

  • THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE IN THE U.S.,

  • PROVINCE TO PROVINCE IN CANADA AND FROM COUNTRY TO COUNTRY.

  • THIS LIMITED WARRANTY APPLIES ONLY TO ITEMS SOLD WITHIN THE UNITED STATES OF AMERICA, CANADA AND THE COMMONWEALTH OF PUERTO RICO. FOR WARRANTY COVERAGE WITHIN OTHER COUNTRIES, CON-TACT THE WEN CUSTOMER SUPPORT LINE. FOR WARRANTY PARTS OR PRODUCTS REPAIRED UNDER WAR-RANTY SHIPPING TO ADDRESSES OUTSIDE OF THE CONTIGUOUS UNITED STATES, ADDITIONAL SHIPPING CHARGES MAY APPLY.

THANKS FOR REMEMBERING
V. 2020.07.14

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals