SNOW JOE BSL-320 Bliss Outdoors LED Solar Disc Lights Instructions

June 9, 2024
SNOW JOE

SNOW JOE LOGO

SNOW JOE BSL-320 Bliss Outdoors LED Solar Disc Lights

SNOW JOE-BSL-320-Bliss-Outdoors-LED-Solar-Disc-Lights

Please read instructions carefully and keep for future reference.

WARNING:

  • Keep away from flames
  • Do not shake it violently
  • Do not disassemble the lights without professional help

PRODUCT INFORMATION

LED Color …………………………………………………….White, Multicolor
Sensor Type …………………………………………………….Optical Sensor
Charging Efficacy …………………………………………………………. 20%
Charging Time ………………………………………………………..6-8 Hours
Working Time ………………………………………………………. 8-10 Hours
Waterproof Rating ……………………………………………………….. IP65

INSTALLATION

  1. Install 2 plastic stakes (Fig. 1) and turn on the switch.SNOW JOE-BSL-320-Bliss-Outdoors-LED-Solar-Disc-Lights-1
  2. Install solar lights on a good place under the high and direct bright sunlight. Please keep the surface clean, because if the mud, dirt, and so on are stored in the solar panel, it will have influence on charging efficiency. NOTE: The stakes can not be forcibly inserted into the hard ground, otherwise them will be damaged. Before installing the solar lights into the ground, dig a small hole in the soil with a tool.
  3. Solar lights turn off and charge in daytime and bright place, turn on and light up in the dark or at night automatically.
  4. Keep it full charging for 8-10 hours when use the solar lights first time.

WARM TIPS:

  1. Turn on the switch on the back before mounting the solar lights.
    NOTE: This is a solar powered light, the working time is affected by weather. (The working time of our solar lights will change depending on the weather, sunlight intensity and charging time)

  2. Position your solar disk light in a location where disk light can be exposed to maximum sunlight during the day. Do not position your solar light outdoor in a place where shade from the sun , e.g. under trees or shrubs. Our solar disk lights automatically light on at night via the built-in light sensor. Please don’t place the lights under the light source at night, e.g. streetlights. NOTE: Do not use the spikes if you want to put the solar disk lights on the hard ground or steps.

FREQUENTLY ASKED QUESTIONS

  1. Q: Is it always lit at night? Or just when sensing the sensor
    A: Because it is a light sensor, it is always on at night.
    It turns off automatically when the surroundings become bright.

  2. Q: Do I need to turn on the switch when charging?
    A: It is necessary to turn on the switch when charging.

  3. Q: Can I use it when it arrives?
    A: Yes, you can. Before shipping, the product is fully charged, so it should be usable as soon as it arrives.

If you have any questions or comments,please call the Bliss Outdoors™ customer service department at:
1-800-695-2626
© 2022 Snow Joe, LLC. All rights reserved. Bliss Outdoors™ is a trademark of Snow Joe, LLC. | Made in China

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals