nVent 34812-910 Frame Type Plug In Unit Cover Plate Installation Guide

: June 15, 2024
: nVent

Table of Contents

nVent 34812-910 Frame Type Plug-In Unit Cover Plate
Product Usage Instructions
KEY FEATURES
PRODUCT ATTRIBUTES
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

nVent 34812-910 Frame Type Plug-In Unit Cover Plate

Product Information

Specifications

Product Type: Cover
Type: Cover Plate
Works With: Frame Type Plug-In Unit
Rack Width: 10 HP
Depth: 167 mm
Package Quantity: 10

Key Features

The air flow rate in a perforated area approx. 60%
The cover plate is inserted top and bottom between the side
Panels

Additional Product Details:

Cover plate for frame-type plug-in units, with perforation for guide rail fixing. The perforation guarantees an air flow rate of approximately 60%. The plate is inserted into a groove of the side panel. Please order guide rails for fitting in the plug-in unit separately.

Certifications:

North America: All locations +1.763.422.2661
Europe: Straubenhardt, Germany +49.7082.794.0 | Betschdorf, France +33.3.88.90.64.90 | Warsaw, Poland +48.22.209.98.35 | Assago, Italy +39.02.932.7141
Asia: Shanghai, China +86.21.2412.6943 | Qingdao, China +86.532.8771.6101 | Singapore +65.6768.5800 | Shin-Yokohama, Japan +81.45.476.0271
Middle East & India: Dubai, United Arab Emirates +971.4.378.1700 | Bangalore, India +91.80.6715.2001 |Istanbul, Turkey +90.216.250.7374

Product Usage Instructions

Step 1: Gathering Materials

Before starting the installation process, make sure you have the following materials:

Frame Type Plug-In Unit
Side Panels
Guide Rails (to be ordered separately)
10 HP Cover Plate (included in the package quantity of 10)

Step 2: Preparing the Plug-In Unit

Ensure that the frame-type plug-in unit is properly assembled and ready for installation.

Step 3: Installing the Cover Plate

Take one of the 10 HP cover plates from the package.
Locate the perforated area on the cover plate.
Insert the cover plate into the groove of the side panel, ensuring that the perforated area aligns with the guide rail fixing points.
Repeat the process for the bottom cover plate, inserting it into the groove of the opposite side panel.

Step 4: Fitting Guide Rails

Order guide rails separately and follow their specific installation instructions to fit them into the plug-in unit.

Step 5: Finalizing Installation

Once the cover plates and guide rails are properly installed, make sure all components are securely in place and the plug-in unit is ready for use.

KEY FEATURES

The air flow rate in a perforated area approx. 60 %
A cover plate is inserted top and bottom between the side Panels

PRODUCT ATTRIBUTES

Product Type: Cover
Type: Cover Plate
Works With: Frame Type Plug-In Unit
Rack Width: 10 HP
Depth: 167 mm
Package Quantity: 10

ADDITIONAL PRODUCT DETAILS

Cover plate for frame-type plug-in units, with perforation for guide rail fixing. The perforation guarantee an air flow rate by approx. 60%. The plate is inserted into a groove of the side Panel. Please order guide rails for fitting in the plug-in unit separately. Please take into consideration that deliveries may be carried out in the stated SPQs (SPQ, e.g. 5 pieces, 10 pieces, 50 pieces, etc.). Differing order quantities (e.g. 2 pieces) may be changed to the next possible delivery quantity = Standard Pack Quantity.

North America